Conference Agenda

Overview and details of the sessions and sub-session of this conference. Please select a date or session to show only sub-sessions at that day or location. Please select a single sub-session for detailed view (with abstracts and downloads if available).

Please note that all times are shown in CEST. The current conference time is: 13th Dec 2021, 09:44:55am CET

 
Only Sessions at Location/Venue 
 
 
Session Overview
Workshop: Dragon 4
Date: Monday, 19/July/2021
10:15am - 1:00pmDr4 YSPS.1.1: Young Scientists Poster Session on Land & Cal/Val
Workshop: Dragon 4


10:15-11:15 CEST     Poster Session (for all participants)

11:15-11:30                 BREAK

11:30-13:00 CEST     Poster Session (for adjudicators & poster authors)

Dragon 4 
 
Poster
ID: 283 / Dr4 YSPS.1.1: 1
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 38577 - Earthquake Precursors from Space and Ground Detecting Seismic Anomalies from Satellite and Ground Data with Multiple Parameters

EOF Analysis Application in Detecting Potential Pre-Earthquake Anomalies from Swarm Satellite Data

Maja Pavlovic1, Yaxin Bi1, Peter Nicholl1, Xueming Zhang2

1Ulster University, United Kingdom; 2Institute of Earthquake Forecasting, China Earthquake Administration

The goal of this work was to examine the potential of the General Empirical Orthogonal Function (EOF), also known as Principal Component Analysis (PCA), in detecting anomalous earthquake precursory variations in Earth’s ionosphere - litosphere geomagnetic system. For this purpose, two major earthquake episodes in China have been selected. M6.0 quake, with epicentre at 39.835°N, 77.108°E, 86 km ENE of Arzak, which occurred on 19.01.2020, and the M6.3 quake, with epicentre at 33.144°N, 86.864°E in western Xizang, on 22.07.2020. The spatial-temporal variability patterns in an ~800 km radius of earthquake epicentres were calculated using geomagnetic data, collected at 1 Hz by Vector Field Magnetometer onboard SWARM A, B and C, ESA’s low earth orbiting satellites. The total magnetic field was calculated, transformed into the NEC frame, and corrected for the impact of Earth’s core magnetism via CHAOS model. Analysis was able to identify eight significant EOF and PC components on a 3 - month and 1- year time scale. The results were observed in earthquake’s seismo-tectonic context, and with planetary geomagnetic storm activity indices K and A, to reduce the possible influence of other anomaly sources. Anomalous patterns in EOF and PC components were revealed along and on borders of the local tectonic fault lines and around earthquake epicentres. At the time when anomalous patterns occurred, examined geomagnetic A and K storm indices were indicative of quiet periods, strongly suggesting the pre-cursory connection between detected geomagnetic anomalies and subsequent earthquake events.



Poster
ID: 282 / Dr4 YSPS.1.1: 2
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 38577 - Earthquake Precursors from Space and Ground Detecting Seismic Anomalies from Satellite and Ground Data with Multiple Parameters

An Enhanced Martingale Method for Detecting Seismic Precursors from Swarm Satellite Data

Shane Patrick Harrigan1, Yaxin Bi1, Mingju Huang2, Guoze Zhao3

1School of Computing, Faculty of Computing, Engineering and the Built Environment, Ulster University, Jordanstown Road, Newtownabbey, Co Antrim, UK; 2Belfast School of Architecture and the Built Environment, Faculty of Computing, Engineering and the Built Environment, Ulster University, Jordanstown Road, Newtownabbey, Co Antrim, UK; 3Institute of Geology, China Earthquake Administration, Beijing 100029, China

The detection of seismic activity precursor signs as part of an alarm system will provide opportunities for minimization of the social and economic impact seismic events such as earthquakes cause. It has long been theorized that the Earth's electromagnetic field could contain precursor signs before a seismic event with a growing body of empirical evidence. The ability to measure and monitor electromagnetic field activity has increased with each passing year as more sensors and methodologies emerge; missions such as Swarm have enabled researchers to access near-continuous observations of electromagnetic activity at second intervals allowing for more detailed and exciting studies.

This poster presents an approach designed to detect precursor anomalies in electromagnetic field data from Swarm satellites and initial analysis results. This works towards developing a continuous and effective monitoring system of seismic activities based on the already deployed tools of Swarm available. We develop an enhanced form linear probabilistic model based on the martingale probability theories that test the null hypothesis to indicate abnormal changes in electromagnetic field activity. We test this enhanced approach in two experiments; firstly, we perform a quantitative comparison on well-understood and popular datasets alongside the classic approach. We find that the enhanced version does not negatively affect the performance of the underlying theory and instead produces more accurate anomaly detections overall. Secondly, we use three case studies of seismic activity (namely earthquakes in Mexico, Greece, and Croatia) to assess our approach. For each case study, we use two grids (500x500km and 1000x1000km, respectively) centered on the epicenters of the earthquakes and found that our method could detect anomalous phenomena in the electromagnetic data months ahead of the seismic activity when focused on these specific regions, thereby leading up to the study's seismic events.



Poster
ID: 146 / Dr4 YSPS.1.1: 3
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32278 - Three- and Four-Dimensional Topographic Measurement and Validation

Structural Health Monitoring for Sea Crossing Bridge Integrating Time-series InSAR Analysis and Structural Principle

Xiaoqiong Qin1,2,3,4, Chisheng Wang1,3,4, Mingsheng Liao2, Qingquan Li1,2,3,4, Lu Zhang2

1School of Architecture & Urban Planning, Shenzhen University; 2State Key Laboratory of Engineering in Surveying, Mapping and Remote Sensing, Wuhan University; 3MNR Key Laboratory for Geo-Environmental Monitoring of Great Bay Area; 4Guangdong Key Laboratory of Urban Informatics

Sea Crossing Bridge can cross bays, straits, and deep marine water, which are critical nodes to ensure the smooth flow of traffic arteries on the mainland. Even subtle displacements may affect the performance of bridges and cause high maintenance and repair costs. In order to timely and accurately inspect their structural safety status, the Synthetic Aperture Radar Interferometry (InSAR) technique which can quickly extract surface deformation over a large area at fine resolution, with low labor and material costs, and no effects on bridge normal operation, has been established as an effective method for bridge structural health monitoring.

Considering the complex structure and environmental effects of the Sea Crossing Bridge, there are still some issues to be solved to achieve the InSAR based structural health monitoring. First of all, the density and accuracy of point targets (PTs) are low on structures with significant de-coherence effects, leaving how to extract dense and accurate PTs upon partially coherent Sea Crossing Bridge still a problem. Moreover, previous thermal dilation monitoring methods relied on the linear deformation assumption of PTs without considering the actual structural mechanics of bridges, which are not appropriate for long-span Sea Crossing Bridge with long thermal dilation propagation distance. Finally, SAR side-looking imaging geometric distortion and simple analysis of bridge linear deformation maps are difficult for non-expert users to understand, making the InSAR results interpretation difficult.

Aiming at the above issues, the goal of this study is to develop a measurement and analysis method to detect the global deformation of the Sea Crossing Bridge quickly and accurately by introducing the structural principle into the conventional time-series InSAR analysis. As for the PTs selection, the structural coherent and non-coherent information of the bridge are considered to improve the density and accuracy of detectable PTs. In terms of thermal dilation modelling, a structural-driven regression analysis method is applied to establish a quantitative relationship between the temperature and the displacement. In order to provide user friendly results, the 3D visualization of deformation results is realized based on the bridge structural information and local observation geometric parameters, and the 3D visualized analysis results and structural theory are integrated for bridge structural health monitoring.

Taking the East Sea Bridge as an example, the detail deformation along the bridge is estimated by processing Sentinel-1 images from 2015 to 2017 based on the above method. After modelling and separating the thermal dilation along the bridge, the structural risk level is evaluated based on the comprehensive analysis of structural risk indicators and structural deformation. Risk sections along the bridge are identified, which would be helpful in guiding the management and maintenance, as well as disaster prevention of the Donghai Bridge.

Qin-Structural Health Monitoring for Sea Crossing Bridge Integrating Time-series InSAR Analysis and_Cn_version.pdf


Poster
ID: 300 / Dr4 YSPS.1.1: 4
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 38577 - Earthquake Precursors from Space and Ground Detecting Seismic Anomalies from Satellite and Ground Data with Multiple Parameters

Earthquake Electromagnetic Precursor Anomalies Detected by The CSELF Network

Bingbing Han1, Guoze Zhao1, Yaxin Bi2, Ji Tang1, Lifeng Wang1, Yan Zhan1

1China Earthquake Administration, China, People's Republic of; 2School of Computing, Faculty of Computing, Engineering and the Built Environment, University of Ulster, Belfast BT37 0QB, United Kingdom

The first electromagnetic observation network, consisting of 30 stations and covering the Beijing Capital Area(BCA) and the regions of North South Seismic Belt(NSSB) in China, has been built recently under the support of the National Development and Reform Commission of China. The network is designed to record the natural electromagnetic signal from 1000Hz to 1000s and powered transmitted electromagnetic signal from 300Hz to 0.1Hz, including five components Ex (NS electric field), Ey (EW electric field), Hx (NS magnetic field), Hy (EW magnetic field) , and Hz( vertical magnetic field) at each station of the network. The electromagnetic time series, spectrum, apparent resistivity and impedance phase etc. are the parameters used to study possible anomalies before earthquakes.

In this report, we present the case studies, discovering the precursor of apparent resistivity prior to Yangbi EQ (M=5.1) which occurred on March 27, 2017 near Dali city in Yunnan province. The epicenter depth is about 12km, which was located in the west of Nanjianweishan fault which is part of big Honghe fault belt. The earthquake mechanism solution is dextral strike-slip. Dali station (YX) is the nearest station to the epicenter with 32km distance and locates to the east of the Nanjianweishan fault. The study found that both polarizations of apparent resistivity ρxy and ρyx for natural signal started to gradually increase in pulse type from January 16, 2017 (about 10 weeks before EQ). They reached the maximum on March 15, 2017 (12 days before the EQ) and then rapidly decreased to the background reference value on March 23-24, 2017 (3-4 days before EQ). At the same time the variation amplitude of anomalous ρxy is bigger than that of ρyx. For the ρxy the values of single pulses of anomalous resistivity are generally 30-80% bigger than the background value. The maximum value is about 130% larger than the background value. Correspondingly, both impedance phase φxy and φyx firstly gradually decreased and recovered to the background value again before the earthquake. The variation amplitude of anomalous impedance phase φxy is larger than that for φyx.

Another kind of apparent resistivity anomaly has been observed before the Jinggu earthquake (Ms=5.9) which occurred in Jinggu county in Yunnan province on December 6, 2014. The apparent resistivity ρxy decreased gradually from 80Ω·m before the earthquake. The resistivity suddenly decreased to 60 Ω·m on the day when the earthquake happened. After the earthquake the resistivity remains active for five months.

In addition, spectrum variations of electro-magnetic field with one year period have been observed for almost all stations using the continuous data recorded for several years, which is different from traditional feature of the spectrum variation. According to the powered transmitted data the anomalous increase of electromagnetic field are also found before some earthquake events.



Poster
ID: 201 / Dr4 YSPS.1.1: 5
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32278 - Three- and Four-Dimensional Topographic Measurement and Validation

3D SAR Imaging of Natural Media and Geophysical Parameter Retrieval

Mauro Mariotti d'Alessandro1, Yanghai Yu1,2, Xinwei Yang2, Yu Bai3, Stefano Tebaldini1, Mingsheng Liao2, Wen Yang3

1Politecnico di Milano, Italy; 2State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University; 3School of Electronic Information, Wuhan University

The research has focused on defining new processing methods for high-resolution 3D imaging of the interior of forests and glaciers and the characterization of their temporal behavior, in view of future application in the context of future low frequency Missions such as BIOMASS and Rose-L. The following questions were addressed: i) What will be the impact of changing weather conditions on AGB retrieval based on BIOMASS Tomographic data and Interferometric data? What is the most accurate signal processing approach for forest height retrieval based on tomographic data? What are the driving requirements for very high-resolution tomographic imaging of natural scenarios?

As spaceborne Tomographic data are not available as of today, the research made use of data acquired in the context of dedicated ground-based and airborne campaigns by ESA, including the P-Band airborne campaigns BioSAR 1, AfriSAR, the L-Band airborne campaign AlpTomoSAR, and the P-Band ground-based campaign TropiScat.

Temporal effects were studied on an experimental basis using data from the ground-based campaign TropiSCAT and from the two airborne campaigns BioSAR 1 and AfriSAR. TropiSCAT data were used to directly mimic BIOMASS acquisitions by analyzing tomograms formed by taking the signals acquired by different antennas on different days. Since BIOMASS tomography will be implemented by taking acquisitions each separated by three days, we considered tomograms obtained by taking two TropiS-CAT antennas every 3 days (and three antennas on the last day), which means that any single tomogram can be obtained by mixing seven different days. We refer to these tomograms as “7-day tomograms.” Each 7-day tomogram is associated with an “instantaneous tomogram” obtained by taking all 15 antennas at 6:00 a.m. on the seventh day, which is used as reference. Tomographic processing is then carried out by focusing the acquisitions from seven days in ground range-height coordinates by time-domain back projection. As a result, it was possible to form 66 7-day tomograms, of which 61 included acquisitions with both sunny and rainy days, so as to provide a clear experimental assessment of the radiometric error due to changing weather conditions. The error was then translated to an AGB retrieval error based on the observed sensitivity of tomographic data to forest biomass at the TropiSCAT site, which was known from air-borne measurements.

The evaluation of the impact of temporal decorrelation on AGB retrieval based on in-terferometric data was carried out with reference to the ground-cancellation technique. The technique consists in a coherent combination of two or three SAR images that allows to cancel out the ground echo and emphasize canopy backscattering, and it is currently assumed as the baseline retrieval approach for BIOMASS. Our analysis consisted in implementing the ground-cancellation technique using airborne campaign data acquired on the same day and on different days (time lags of 4, 5, and 9 days). In so-doing, we were able to provide a direct measurement of the radiometric error due to temporal decorrelation.

Optimal processing for forest height retrieval was addressed by implementing and comparing two different approaches: 1) parametric height estimation by minimizing the least-square problem between random volume over ground (RVoG) model predictions and multibaseline SAR data and 2) thresholding the vertical backscattering obtained by tomographic focusing. Both approaches were applied to the case of P-Band data collected during the AfriSAR campaign, and validated against Lidar measurements.

Optimal processing of tomographic data was addressed by studying imaging arte-facts that arise when conventional one-dimensional (1D) focusing methods, such as beamforming or Capon filtering, are applied to process data collected using large-ly-spaced and/or largely-irregular trajectories. A new processing method was proposed to produce high-quality imaging while largely reducing the computational burden, and without having to process the original raw data. The analysis was validated by results from numerical simulations as well as from real airborne data from the ESA campaign AlpTomoSAR.

Results from TropiSCAT clearly indicate that canopy scattering is more stable than ground scattering level, consistently with the physical explanation that ground scattering is more affected by changing moisture conditions. Based on previous studies at the same test-site, the observed variation of 1–1.5 dB in the 7-day tomograms would entail a bio-mass retrieval error of around 50–80 t/ha, which is on the order about 20% or better. The analysis of ground-cancelled images was particularly relevant as directly linked to AGB retrieval algorithms to be implemented for the BIOMASS Mission. In accordance with theoretical models, experiments indicate that temporal decorrelation mostly affects scarcely vegetated areas, whereas in high biomass regions levels the radiometric error is limited to within 1dB. Overall, these results support the feasibility of extracting accurate biophysical information from repeat-pass BIOMASS data, concerning both the tomographic and the interferometric phase of the Mission.

The research on temporal effects was not limited to a quantification of the resulting errors, but also on the development of signal processing methods to compensate for such effects.

As for forest height retrieval, results indicate that the best approach could result from a joint use of non-parametric and parametric methods, to merge the capability of mod-el-based retrieval to work without requiring parameter tuning and the computational efficiency and accuracy of SAR tomography.

Finally, the work on AlpTomoSAR data fully demonstrates that the quality of a tomographic airborne surveys is not limited in any sense by platform stability during the acquisition, under the condition that tomographic processing is correctly implemented, therefore supporting the possibility of tomographic imaging using small satellite formation.

Mariotti dAlessandro-3D SAR Imaging of Natural Media and Geophysical Parameter Retrieval-201Poster4_Cn_version.pdf
Mariotti dAlessandro-3D SAR Imaging of Natural Media and Geophysical Parameter Retrieval-201Poster4_ppt_present.pdf


Poster
ID: 162 / Dr4 YSPS.1.1: 6
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32278 - Three- and Four-Dimensional Topographic Measurement and Validation

Detecting And Monitoring Of Slow-moving Post-earthquake Landslide By InSAR Technology In Jiuzhaigou Area

Jiehua Cai1, Lu Zhang1, Mingsheng Liao1, Jie Dong2

1State Key Laboratory of EInformation ngineering in Surveying, Mapping and Remote Sensing, Wuhan University, Wuhan 430079 China; 2School of Remote Sensing and Information Engineering, Wuhan University, Wuhan 430079 China

On 8th August 2017, a magnitude Mw 6.5 earthquake occurred in the County of Jiuzhaigou in Sichuan Province, China (USGS, https://earthquake.usgs.gov/). Because of its high magnitude and shallow epicenter, the earthquake caused grave casualties and property losses. Furthermore, the earthquake triggered numerous secondary mountain disasters such as rockfall and landslide. Shortly after the Jiuzhaigou earthquake, some studies had assessed the number, distribution and other characteristics of the coseismic landslides based on pre- and post-event remote sensing data. However, slow-moving post-earthquake landslides don’t show visible change at short notice and are often neglected by the common change detection method. These slow-moving landslides will pose a long-term potential threat to people’s life and property. Therefore, a detailed monitoring of the slow-moving landslides is crucial to post-earthquake recovery and reconstruction.

Synthetic aperture radar interferometry (InSAR) technology, which has large ground coverage and high spatial resolution, has great advantages for geological disaster observation under all weather conditions. It has been utilized in ground surface deformation measuring of landslide for disaster detection and assessment. In this research, we adopt an optimized strategy that combines D-InSAR technique with SBAS InSAR to accurately detect and monitor the slow-moving post-earthquake landslides in Jiuzhaigou area. Firstly, we carry out a quick detection across wide area using differential InSAR (DInSAR) technique with 6 ALOS‐2 PALSAR‐2 ascending images. To retrieve the temporal evolution of these landslides, a detailed monitoring of specific landslides is carried out using the short baseline subset InSAR (SBAS-InSAR) during the period from 2007 to 2019. Combining with other multi-source data (including field investigation, LiDAR and optical image), we perform an in-depth analysis of the impact of the 2017 Jiuzhaigou earthquake on slow-moving post-earthquake landslides.

The results show that there are 16 slow-moving post-earthquake landslides which can be detected by InSAR analyses in Jiuzhaigou area, including 8 landslides close to residential areas. These landslides are mainly distributed in the NE plate (active plate), and the slide directions mainly are east (including 9 landslides) and southeast (include 5 landslides). Secondly, we found that the earthquake’s impact on the slow-moving landslides can mainly be classified into three categories: (a) accelerating the active historical landslides that were already sliding before the earthquake; (b) reactivating the stable historical landslides which were undisturbed before the earthquake; (c) directly triggering the landslides that had stable geological environment before the earthquake. For each case, we demonstrate some case studies of landslide affected by the earthquake, and perform a detailed analysis combining with multi-source data.

Cai-Detecting And Monitoring Of Slow-moving Post-earthquake Landslide-162Poster4_Cn_version.pdf


Poster
ID: 340 / Dr4 YSPS.1.1: 7
Poster for Dragon 4
Land & Environment: 32248 - Earth Observation Based Urban Services for Smart Cities and Sustainable Urbanization

Impact Of Ecological Water Compensation On Urban Safety Along Yongding River (Beijing Section)

Mingliang Gao1,2,3,4, Huili Gong1,2,3,4, Xiaojuan Li1,2,3, Yinghai Ke1,3, Beibei Chen1,2,3,4, Mi Chen1,2, Chaofan Zhou1,2,3,4, Min Shi1,2,3, Mingyuan Lv1,2

1Capital Normal University, China, People's Republic of; 2Key Laboratory of Land Subsidence Mechanism and Prevention, MOE, People's Republic of; 3Beijing Laboratory of Water Resources Security, China, People's Republic of; 4Observation and Research Station of Groundwater and Land Subsidence in Beijing-Tianjin-Hebei Plain, MNR, People's Republic of

Yongding River Basin Ecological Repair is an important issue. the coordinated development of beijing-tianjin-hebei, South-to-North Water Diversion, and local comprehensive background such as groundwater recharge, along the river yongding river ecological hydrating uncertainty of the problems of groundwater system, ground stability, and urban security risk is an important scientific problems. This topic is comprehensive satellite remote sensing data, traditional hydrogeological formation and groundwater measured data, integrated GIS spatiotemporal analysis, time series decomposition, wavelet analysis and neural network model, etc., analyzing Yongding River (Beijing Section) affects groundwater flow field evolution and surface The deformation response process, and the effect of Ecological compensation on urban safety in the Ecological compensation of the Yongding River is evaluated as an example of building stability, underground rail traffic safety and Beijing Daxing International Airport. The research results of the topic can provide technical support for evaluating the effects of Yongding River ecological water compensation on the stability of coastal formation, providing a scientific basis for urban security risk assessments, providing scientific reference for avoiding the negative impact of water compensation of Yongding River.

Gao-Impact Of Ecological Water Compensation On Urban Safety Along Yongding River-340Poster4_Cn_version.pdf
Gao-Impact Of Ecological Water Compensation On Urban Safety Along Yongding River-340Poster4_ppt_present.pdf


Poster
ID: 344 / Dr4 YSPS.1.1: 8
Poster for Dragon 4
Land & Environment: 32248 - Earth Observation Based Urban Services for Smart Cities and Sustainable Urbanization

Built-Up Area Mapping at Large-Scale using Sentinel-1 SAR Data and Deep Learning

Sebastian Hafner, Yifang Ban, Andrea Nascetti

KTH Royal Institute of Technology, Sweden

Today, more than half of the world population is living in cities. This number is growing rapidly and by the middle of the 21st century, two thirds of the global population is projected to reside in urban areas. Earth Observation (EO) has become a valuable tool to provide up-to-date and reliable maps of urban areas needed to support sustainable city planning. Past studies demonstrated that Synthetic Aperture Radar (SAR) is effective in detecting built-up areas. Recently, deep learning algorithms, specifically Convolutional Neural Networks (CNNs), have gained popularity for built-up area mapping from Sentinel-2 MultiSpectral Instrument (MSI) data. The lack of cloud-free data may, however, hamper the updatability of optical-based built-up area mapping. In contrast to Sentinel-2, the Sentinel-1 SAR is able to acquire data in cloudy conditions as well as during day and night.

In this research, we explored the potential of Sentinel-1 SAR data for built-up area mapping at large-scale using deep learning. Specifically, a light-weight U-Net model was trained in the United States by leveraging open data (i.e., Microsoft building footprints) as labels. We assessed model performance in Beijing, China using 10,000 validation points and compared our results to a state-of-the-art product generated using Sentinel-2 MSI data and deep learning . Our results demonstrate that built-up areas can be accurately mapped by SAR and deep learning (F1 score 0.863). Moreover, the proposed approach using transfer learning produced comparable results in Beijing to the state-of-the-art product using local training. However, further research investigating the model transferability to a diverse set of cities is required.

Hafner-Built-Up Area Mapping at Large-Scale using Sentinel-1 SAR Data and Deep Learning-344Poster4_ppt_present.pdf


Poster
ID: 116 / Dr4 YSPS.1.1: 9
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32278 - Three- and Four-Dimensional Topographic Measurement and Validation

Experimental Analyses of Forest Short-Term Decorrelation for Interferometry, Tomography with Tandem SARs, and Distributed SARs

Fabrizio Lombardini1, Claudia Zoppetti1,2, Reza Bordbari1

1University of Pisa, Italy; 2University of Siena, Italy

In the framework of developments of 3D forest [1-3] SAR Tomography (Tomo-SAR), the issue of extensive and detailed characterizations of temporal decorrelation phenomena has emerged, especially for the future spaceborne operations. However, investigation has not been covered by ESA campaigns [4] of height-varying characteristics of decorrelation processes acting at the short-term (fractions of second) scale, for the common case of volumetric scatterers complexly moving in windblown forests.

In this work, a methodology is reported for new analyses of 4D Differential Tomography [5] type of forest temporal decorrelation phenomena, exploiting a ground-based miniradar array with very quick acquisition capabilities. Moreover, corresponding recent real data results are presented, developing characterizations of both height- and time-varying behaviours of the short-term decorrelation in a representative experiment for a stand of trees in Italy (PisaScat experiment), in two different wind conditions and seasons.

Consequently, indications are obtained that short-term decorrelation processes can affect also advanced spaceborne Tomo-SAR systems based on tandem (i.e. formation-flying) configurations [6], depending on the satellite time-lag, and their related products.

This unprecedented characterization concept and the new findings can be useful for current Tomo-SAR and also Pol-InSAR analyses, and most importantly, for development of the advanced mission concepts and programs of SAOCOM-CS-like kind [6], including LuTan-1 [7].

[1] M. Pardini, K. Papathanassiou, “On the Estimation of Ground and Volume Polarimetric Covariances in Forest Scenarios with SAR Tomography,” IEEE GRSL, 14 (10), pp.1860-1864, 2017.

[2] Y. Huang, L. Ferro-Famil, A. Reigber, “Under-foliage Object Imaging using SAR Tomography and Polarimetric Spectral Estimators,” IEEE TGARS, 50 (6), pp.2213-2225, 2012.

[3] X. Yang, M. Liao, L. Zhang, S. Tebaldini, “Forest Height Retrieval in Tropical Areas using P-band Multibaseline SAR Data,” Proc. 6th Asia-Pacific Conference on Synthetic Aperture Radar (APSAR), 2019.

[4] T. Dinh Ho Minh, et al., “Vertical Structure of P-Band Temporal Decorrelation at the Paracou Forest: Results from TropiScat,” IEEE GRSL, 11 (8), pp.1438-1442, 2014.

[5] F. Lombardini, “Differential Tomography: a New Framework for SAR Interferometry,” IEEE TGARS, 43 (1), pp.37-44, 2005.

[6] K. Scipal, M. Davidson, “The SAOCOM-CS Mission: First Bistatic and Tomographic L-band Mission,” Proc. IEEE IGARSS, 2017.

[7] D. Liang, et al., “A High-accuracy Synchronization Phase-compensation Method based on Kalman Filter for Bistatic Synthetic Aperture Radar,” IEEE GRSL, Early Access, 2019.

Lombardini-Experimental Analyses of Forest Short-Term Decorrelation-116Poster4_Cn_version.pdf


Poster
ID: 136 / Dr4 YSPS.1.1: 10
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32278 - Three- and Four-Dimensional Topographic Measurement and Validation

Identification And Monitoring Of Landslides In Mountainous Areas With Time-series InSAR: Analysis Of Landslide Detection Failure In Jichangzheng, Guizhou, China

Yian Wang1, Jie Dong1, Jianya Gong1, Mingsheng Liao2, Lu Zhang2

1School of Remote Sensing and Information Engineering, Wuhan University, Wuhan 430079 China; 2State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University, Wuhan 430079 China

Landslides are a major cause of damages or losses of property and life around the world. The detection and mapping of active slopes is a critical task for landslide disaster prevention and early warnings development. SAR Interferometry (InSAR) has been proven to be effective for landslides deformation measurement. However there are blind areas, at where the landslides cannot be detected by InSAR. These areas are generally caused by geometric distortion and vegetation decorrelation. In engineering applications, identification of blind areas can not only provide a reference for the selection of SAR data, but also provide guidance for other technical tools such as field geological surveys to improve the identification of potential landslides.

This study divides the wide-area InSAR landslide detection into two parts: Prior identification of undetectable areas and early identification of landslide. First,we use DEM data, landcover map, and SAR acquisition parameters (including satellite heading angle and radar incidence angle) to conduct visibility estimation, sensitivity estimation, and InSAR applicability estimation, then forming a comprehensive evaluation index. The visibility estimation is used to identify layover and shadow areas caused by SAR observation geometric distortion. The sensitivity estimation is used to identify areas that are not sensitive to landslide deformation detection. The applicability estimation is used to identify low-coherence areas due to vegetation coverage. Their comprehensive evaluation indicators are provided to provide the final applicability map of landslide detection. Then, time series InSAR is used to detect the wide-area landslides using the StaMPS/SBAS tool.

A huge landslide occurred on 23rd July, 2019 in Shuicheng County, Guizhou Province, China, causing huge damage. Taking Shuicheng County as an example (Figure 1), this study focuses on blind areas of landslide detection and early identification of landslides. This place is in the area of high mountains and canyons, with elevation ranging from 700 to 3000 meters above sea level. The landform landscape is dominated by mountains and hills, and there are landforms such as mountain plains, plateaus, and terraces. And the central Shuicheng County is violently eroded by the severe cutting and erosion of the Beipan River, hence the geometric distortion is very serious. The L-band ALOS-2 PALSAR-2 and C-band Sentinel-1 datasets were used. Among them, the ALOS-2 PALSAR-2 data set is in FBD mode, with a total of 16 scenes; the Sentinel-1 data set is in IW wide mode, with 67 ascending scenes and 69 descending scenes, respectively.

The result blind area detection is shown Figure 2. From the visibility of landslide detection (Figure 2(a)), the shadow area is distributed on both banks of the river valley and the edge area of the elevated terrain. Most of the shadow areas of the ascending orbit overlap with the layover areas of the descending orbit. Therefore, some areas are still undetectable even combining both ascending and descending orbits, which needs additional technical means for supplementary investigation. From the sensitivity of landslide detection (Figure 2(b)), the sensitivity to the north-south slope is the lowest, and the east-west slope is highly sensitive. Therefore, special attention should be paid to landslides with low sensitivity. Judging from the applicability of InSAR (Figure 2(c)), , the applicability is poor in most areas due to dense forest cover, which needs long-wavelength SAR data to obtain high coherence.

We detected six active landslides from the deformation rate maps (Figure 3), covering more than 500 square kilometers, which were interactively verified by the three SAR datasets. Most of the landslides are distributed on the edge of the high-level terrain, presenting huge threat to the local residents at the valleys. There are two landslide areas caused by mining deformation (Figure 4). Continuous monitoring of the safety of buildings around the mine is required, although the danger is relatively small.

It should be pointed out that the Jichangzhen Landslide was not identified from the wide-area detection result. The Jichangzhen landslide is located four kilometers west of the Beipanjiang River, on the southern slope of Jichang Town. The landslide descended from south to north, destroying the buildings that on the slope and foothills, causing huge casualties. From the time series deformation of point P3 (Figure 5), no obvious deformation were found. However, there are landslides called Fanazu and Xujiaying landslides that have been detected on the opposite mountain, whose deformation degree exceeds 60mm/y. The time series deformation of points P1 and P2 shows seasonal pattern. The deformation in winter is small, and the deformation in summer is large. Considering that the geological conditions here as same as those of the two nearby landslides, we speculate that the landslide may be a sudden landslide caused by rainfall. Therefore, the rainfall threshold method should be adopted in the region to carry out meteorological and geological disaster monitoring and early warning.

Wang-Identification And Monitoring Of Landslides In Mountainous Areas With Time-series InSAR-136Poster4_Cn_version.pdf
Wang-Identification And Monitoring Of Landslides In Mountainous Areas With Time-series InSAR-136Poster4_ppt_present.pdf


Poster
ID: 114 / Dr4 YSPS.1.1: 11
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32278 - Three- and Four-Dimensional Topographic Measurement and Validation

Pre- and Post- Failure Landslide Analysis Using Both Satellite and Ground Based InSAR: A Case Study of the Xinmo Landslide, China

Jie Dong, Mingsheng Liao, Lu Zhang

Wuhan University, China, People's Republic of

Landslides are a major threat in all mountainous regions throughout the world, causing huge losses of life and property every year. The measurement of landslide surface deformation can facilitate prevention and mitigation of landslide disasters. The potential landslides can be detected through capturing the pre-failure deformation. The short-term emergency monitoring can be carried out to ensure the rescue security after the landslide collapse using ground based InSAR. The satellite InSAR is more suitable for long-term post-failure landslide risk assessment.

This study takes the Xinmo landslide as an example to demonstrate the pre- and post- failure landslide analysis using both satellite and ground based InSAR. The Xinmo landslide happened in the early morning of 24 June 2017 at about 5:38 am local time, and this catastrophic event caused enormous casualties in Xinmo Village, Mao County, Sichuan Province in China.

We use the Sentinel-1 data to capture the pre-failure movement. Both the ascending and descending Sentinel-1 were processed using StaMPS/SBAS. The sliding source area can be identified from their deformation rate map. The accelerated movement of the source area just before the collapse was measured by both the ascending and descending Sentinel-1 data.

The IBIS FL system was used to assess the post-failure stability of the Xinmo landslide, starting at 20:45:41 in 29 June and ending at 08:52:10 in 05 July. We obtained the averaged linear deformation rate from the 927 scenes for the Xinmo landslide. The averaged linear deformation rate map presents two unstable areas moving toward the GBSAR instrument. One is the debris mass on the west flank of the landslide. The whole east side moved with maximum linear deformation rate larger than 40 mm/d. Another is located at the deposit area. The spatial pattern is slender along the elevation direction, indicating the broken rocks slipping along the slope.

The post-failure ascending and descending Sentinel-1 datasets acquired from June 2017 to December 2019 were processed using StaMPS/SBAS method. The ascending and descending orbits present similar deformation distribution. The north, south, and east sides of the debris mass on the west flank are unstable after the landsldie failure as indicated by the Sentinel-1 results. The maximum LOS deformation rate reached -80 mm/yr. In addition, a large number of rocks and gravels loosely stacked at the bottom of the landslide, i.e. the deposit area. These loose deposits are compacted under the force of gravety. The compaction process behaved as subsidence, which can be captured by the Sentinel-1 satellites. The Sentinel-1 results reveal that the subsidence mainly happenedd in the east side of the deposit area.

Dong-Pre- and Post- Failure Landslide Analysis Using Both Satellite and Ground Based InSAR-114Poster4_Cn_version.pdf


Poster
ID: 115 / Dr4 YSPS.1.1: 12
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32278 - Three- and Four-Dimensional Topographic Measurement and Validation

Monitoring Large-scale Linear Hydraulic Engineering Using Time Series Sentinel-1 Dataset——A Case Study Of The Middle Route Of China’s South-to-North Water Diversion Project

Nan Wang1, Jie Dong2, Mingsheng Liao1, Lu Zhang1

1State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University, China, People's Republic of; 2School of Remote Sensing and Information Engineering, Wuhan University, China, People's Republic of

Large-scale man-made linear hydraulic engineering is a powerful way to improve the ability of water resources allocation and water supply guarantee. It has the features of long line, wide areas, complex engineering layout and many types of functional buildings. The South-to-North Water Diversion (SNWD) Project is a great infrastructure of China to alleviate the serious water shortage in North China and optimize the water supply pattern. It consists of three parts of channels: the Eastern Route Project, the Middle Route Project and the Western Route Project. The total length is 3797 km, involving 15 provinces and 500 million residents. To guarantee the secure operation, it is essential to monitor the geo-stability of such large-scale linear hydraulic engineering. However, traditional ground-based techniques are usually limited by the distribution density of sensors and relocation difficulty of monitoring instruments. Large-scale monitoring of channels and buildings also requires huge monitoring funds.

The Synthetic Aperture Radar Interferometry (InSAR) has been considered as an effective tool for detecting long-term deformation and identifying possible safety problems in civil engineering. The satellite InSAR has the advantages of large-scale coverage, high-precision deformation measurement with low cost. High-frequency coverage of wide SAR images makes this InSAR more suitable for the deformation monitoring of the large-scale infrastructures, such as the SNWD Project.

In this study, a long-term time-series Sentinel-1 IW dataset, including total five frames of Path 11, Path 113 and Path 40, was processed by Persistent Scatters InSAR (PS-InSAR) to monitor the dike of the Middle Route of SNWD Project, as shown in Figure 1. The unstable channel sections were detected and some key sections were analyzed in details.

We obtained the distribution map of deformation rate of the channel in the Henan Province with a length of 730 km, as shown in Figure 2. This result indicates that the dike is generally stable, except for partial canal sections. Some deformation of channel sections is caused by the surrounding ground subsidence, while others are deformation of the channel slope itself.

The Yuzhou-Changge channel section, according to the deformation rate distribution derived by PS-InSAR, crosses through a subsidence region, and the settlement canal is approximately 2.5 km long, as shown in Figure 3. Its maximum deformation velocity is near -20 mm/yr and the profile of the deformation rate along the channel line presents a very uneven deformation of the channel slope. The result is verified by in-situ leveling measurements and they agree well with each other.

The section of the channel in Zhengzhou area also present complex deformation pattern. This channel section passes through deformation areas with uplift and subsidence appearing alternatively. The InSAR deformation time series is consistent with the leveling measurements. The relationship between the special deformation characteristics and the complex distribution of geological faults was discussed.

We carried out an analysis of deformation distribution characteristics of Shahe Aqueduct, one of the most technically complex control engineering in the SNWD Project. The InSAR result reveals that this engineering is relatively stable, except for two design sections. For one of them, the deformation rate of its main body is smaller than that at its entrance. This is related to the engineering features of its lower supporting structure and geological conditions. The other one, the left side of which is excavated from the slope while the right side of which is high fill, is undergoing obvious deformation.

The time-series InSAR technique with high efficiency, high precision makes it a powerful tool for long-term safety monitoring of the SNWD project. It can greatly reduce the monitoring cost for the SNWD Project. It can not only measure the deformation of the channel slope itself, but also detect the stability of the surrounding area of the channel slope. This is more conductive to identify the root causes of deformation and provide guidance for subsequent channel safety maintenance. The InSAR technique can be extended to other routes of the SNWD Project or other water conservancy projects.

Wang-Monitoring Large-scale Linear Hydraulic Engineering Using Time Series Sentinel-1 Dataset——A Case Stu_Cn_version.pdf
Wang-Monitoring Large-scale Linear Hydraulic Engineering Using Time Series Sentinel-1 Dataset——A Case Stu_ppt_present.pdf


Poster
ID: 127 / Dr4 YSPS.1.1: 13
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32278 - Three- and Four-Dimensional Topographic Measurement and Validation

Fault structure and cause analysis of the 2019 Ms6.0 Changning Earthquake in Sichuan, China based on InSAR

Hua Gao1, Mingsheng Liao1, Wenbin Xu2, Xiaoge Liu2, Nan Fang2

1Wuhan University, People's Republic of China; 2Central South University, School of Geosciences and Info-Physics, China

On June 17, 2019, an Ms6.0 earthquake occurred in Changning, Sichuan, China (Changning event), which is the largest earthquake within 50 km of the area since records. It attracts great attention as the area has the largest shale gas production and large mineral salt production in China. Based on Interferometric Synthetic Aperture Radar (InSAR), we measure the coseismic deformation and build the fault models of the Changning event and two earlier Ms>5.0 earthquakes (P1:2018/12/16 Ms5.7 and P2:2019/1/3 Ms5.3) using Sentinel-1 and ALOS2 satellite data. The surface deformation caused by the Changning event is mainly uplift with a maximum of 17.2 cm (towards the satellite). Because of the significant non-Double-Couple character of the earthquake, we obtain a double-fault model (FMB) for the event. The final model shows that the Changning event was caused by a small fault (FMB2) and a big fault (FMB1) with a left-lateral strike and thrust slip. The strike of the main fault is 128° with a dip angle of 46°. The total seismic moment obtained by inversion is 6.68×1017 Nm, corresponding to Mw 5.85. The model is roughly consistent with the double slip model provided by seismology. This provides the geodetic evidence for the double slip of the Changning event. Based on the fault model, we analyze the cause of the Changning earthquake from the local tectonic setting, Coulomb stress change, mining, and fluid injection. The results show that the Changning earthquake is likely to be affected by external stimulation. However, the Changning earthquake does not show the characteristics induced by hydraulic fracturing. The stress change on the main fault after the two earlier Ms>5.0 earthquakes is main positive, with a maximum of 0.09 MPa and the water-flooding position of the salt mine is highly coincident with the main slip area of the fault. Therefore, there is no direct evidence showing that the Changning earthquake was related to hydraulic fracturing. We consider that the event may be related to salt mining. P1 and P2 may also play an important role in advancing the Changning earthquake. The characteristics of aftershock distribution indicate that seismic activities may be controlled by crust heterogeneity and structural complexity.

Gao-Fault structure and cause analysis of the 2019 Ms60 Changning Earthquake-127Poster4_Cn_version.pdf
Gao-Fault structure and cause analysis of the 2019 Ms60 Changning Earthquake-127Poster4_ppt_present.pdf


Poster
ID: 131 / Dr4 YSPS.1.1: 14
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32294 - Integrated Analysis of the Combined Risk of Ground Subsidence Sea Level Rise, and Natural Hazards in Coastal Delta Regions

The Weighted Adaptive Variable-lEngth (WAVE) Technique for InSAR Analysis in Mid-to-Low Coherent Areas

Francesco Falabella1,2,3, Qing Zhao4,5, Antonio Pepe2

1University of Basilicata, School of Engineering, Potenza, Italy; 2Institute for the Electromagnetic Sensing of the Environment (IREA), National Research Council (CNR), Napoli, Italy; 3Institute of Methodologies for Environmental Analysis (IMAA), National Research Council (CNR), Tito Scalo, Italy; 4Key Laboratory of Geographical Information Science, Ministry of Education, East China Normal University, Shanghai, China; 5Joint Laboratory for Environmental Remote Sensing and Data Assimilation, East China Normal University, Shanghai, China

The continuous growing up of Multi-Temporal InSAR (MT-InSAR) methods [1]-[3] have shifted up the reliability and affordability of these techniques. In this context, the new achievable milestones are represented by the challenging tasks of design and tests advanced MT-InSAR for improving the previous techniques, and also for correcting some of the canonical problems that have arisen in the last decades through the well-known interferometric approaches.

The methodology proposed in this abstract is naturally well-posed on the context of the MT-InSAR approaches, and in a specific way, it is designed to correctly work on decorrelated areas, such as the Basilicata region (Italy) and Shanghai bay area (China), which are the two test sites where we have applied the developed framework. Briefly, the test sites are known as problematic and instabilities zones where to perform InSAR analyses, aimed at computing the so-called displacement ground time-series of the investigated targets. The main issues over the aforementioned test sites can be reconducted to the losses of spatial coherence between consecutive SAR acquisitions: These effects are well-known in literature as decorrelation phenomena [4].

The proposed work is based on the use of weighted Least-squares (WLS) approaches for the generation of ground line-of-sight (LOS) displacement time-series through differential interferometric SAR methods. More precisely, in this paper, a WLS method that extends the usability of the Multi-Temporal InSAR (MT-InSAR) Small Baseline Subset (SBAS) algorithm [5] in regions with medium-to-low coherence is presented. The proposed method relies on the adaptive selection and exploitation, pixel-by-pixel, of the medium-to-high coherent interferograms, such as to discard the noisy phase measurements. In such a way, for each pixel, it is possible to obtain several disjoined sets of interferograms, which are then connected by exploiting the weighted singular value decomposition (WSVD) method [6]. As a consequence, the interferogram networks reduction may lead to rejecting some SAR acquisitions from the used dataset, this results in the generation of so-called variable-length displacement time-series. The core of the approach resides in the innovative interferograms inversion step, through the Weighted-SVD approach, which permits us to emphasize the more reliable phase measurements by constraining them with the weights computed as the reciprocal of the phase variance. In a specific way, the strategy adopted for weighting each pixel of every InSAR pairs is straightforward obtained by exploiting the basic principles of the directional statistic [7], in this manner it is possible to compute the variance values, avoiding the computational burden of the standard approach. The solution is now pixel-dependent, because both the selected InSAR data pairs and the associated weights are different from pixel to pixel. In critical regions, it may also happen that the pre-selection of the “good” interferograms, for the given SAR pixel, leads some SAR acquisitions being discarded. In this latter case, the ground displacement time-series can also still calculate but with a reduced length that preserve the reliability of the results, with a significant increase in correctly investigated pixels, at the expense of a less dense temporal sampling.

The experimental results have been performed considering by applying the Weighted Adaptive Variable-lEngth (WAVE) technique [8] to two different SAR datasets collected by the Italian Space Agency Cosmo-SkyMed (CSK) constellation sensors and the Sentinels platform over the Basilicata region (Italy) and the Shanghai bay area (China), respectively. The preliminarily results will be presented and discussed at the next Dragon-IV meeting.

References:

[1] Ferretti, A.; Fumagalli, A.; Novali, F.; Prati, C.; Rocca, V.; Rucci, A. A New Algorithm for Processing Interferometric Data-Stacks: SqueeSAR. IEEE Trans. Geosci. Remote Sens. 2001, 49, 3460–3470.

[2] Fornaro, G.; Verde, S.; Reale, D.; Pauciullo, A. CAESAR: An approach based on covariance matrix decomposition to improve multibaseline multitemporal interferometric SAR processing. IEEE Trans. Geosc. Remote Sens. 2015, 4, 2050–2065.

[3] Pepe, A.; Yang, Y.; Manzo, M.; Lanari, R. Improved EMCF-SBAS Processing Chain Based on Advanced Techniques for the Noise-Filtering and Selection of Small Baseline Multi-look DInSAR Interferograms. IEEE Trans. Geosci. Remote Sens. 2015, 53, 4394–4417.

[4] Zebker, H.A.; Villasenor, J. Decorrelation in interferometric radar echoes. IEEE Trans. Geosci. Remote Sens. 1992, 30, 950–959.

[5] Berardino, P.; Fornaro, G.; Lanari, R.; Sansosti, E. A new algorithm for surface deformation monitoring based on small baseline differential SAR interferograms. IEEE Trans. Geosci. Remote Sens. 2002, 40, 2375–2383.

[6] Van Loan, C. F. Generalizing the singular value decomposition. SIAM J. NUMER. ANAL. 1976, 13, 1.

[7] Mardia, K.V.; Jupp, P.E. Directional Statistics; Wiley: New York, NY, USA, 2000.

[8] Falabella, F.; Serio, C.; Zeni, G.; Pepe, A. On the Use of Weighted Least-Squares Approaches for Differential Interferometric SAR Analyses: The Weighted Adaptive Variable-lEngth (WAVE) Technique. Sensors2020, 20, 1103; doi:10.3390/s20041103

Falabella-The Weighted Adaptive Variable-lEngth-131Poster4_Cn_version.pdf
Falabella-The Weighted Adaptive Variable-lEngth-131Poster4_ppt_present.pdf


Poster
ID: 145 / Dr4 YSPS.1.1: 15
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32294 - Integrated Analysis of the Combined Risk of Ground Subsidence Sea Level Rise, and Natural Hazards in Coastal Delta Regions

Optimization of the Combined C-/X- Band Time-Overlapped Ground Deformation Time-Series Derived by SBAS-DInSAR and SVD method

Jingzhao Ding1,2,3, Qing Zhao1,2,3, Maochuan Tang1,2,3, Qiang Wang1,2,3

1Key Laboratory of Geographical Information Science, Ministry of Education, East China Normal University, Shanghai 200062, China; 2Chongming ECO Institute, East China Normal University, Shanghai 200241, China; 3School of Geographic Sciences, East China Normal University, Shanghai 200241, China

Spaceborne Multi-temporal Synthetic Aperture Radar Interferometry (MT-InSAR) is an advanced technology which is capable of obtaining line of sight (LOS) ground deformation measurements [1, 2]. In order to obtain long-term deformation time-series, data merging methods have been proposed to combine deformation time-series which are independently retrieved by different SAR satellite datasets [3, 4]. Singular value decomposition (SVD) method has been efficiently used for combing two time-overlapped ground deformation time-series [2]. SVD can solve the rank-defect linear solution problem in the combination of two time-overlapped deformation time-series [4]. However, the optimal number of SAR observations during the time-overlapped period for combing two deformation time-series with SVD is still unknown. It is necessary to be investigated.

In this study, two time-overlapped SAR datasets covering Shanghai were used. The first dataset consists of 61 images, which were collected by COSMO-SkyMed (CSK) sensor operating at X-band (Descending, HH polarization) from December 7, 2013 to March 18, 2016. The second dataset consists of 47 images, which were collected by Sentinel-1A(S1A) sensor operating at C-band (Ascending, VV polarization) from February 26, 2015 to January 12, 2019. There are 23 CSK images and 13 S1A images in the time-overlapped period from February 26, 2015 to March 18, 2016. We separately caculated the CSK and S1A LOS deformation time-series through Small BAseline Subset (SBAS) [2]. The CSK and S1A LOS deformation time-series were converted to vertical direction with the satellite incidence angles [5, 6]. Then, we removed the components of the CSK vertical deformation time-series in N1 (1,2…,22) times during the time-overlapped period. Correspondingly, we removed the last N1 components in the N1-th removal operation. Thus, we acquired 22 groups of new CSK deformation time-series. Furthermore, the 22 groups of new CSK time-series were combined with the initial S1A time-series by using SVD method respectively. we obtained 22 groups of CSK+S1A deformation time-series. Similarly, we removed the components of the S1A time-series by N2 (1,2…,12) times, and removed the first N2 components in the N2-th removal operation. We obtained 12 groups of new S1A time-series. After the combination with initial CSK time-series, we obtained another 12 groups of CSK+S1A deformation time-series. Finally, the accuracy of the 34 groups of CSK+S1A time-series were evaluated by using the ground leveling measurement data.

We compared the accuracy of the 34 groups of combined CSK+S1A ground deformation time-series to investigate the optimal number of SAR observations during the time-overlapped period. The results indicate that if the number of overlapped SAR observations is less than 5, the accuracy of combined time-series is dramatically decrease. The accuracy of time-series combined with more than 5 SAR observations in the time-overlapped period is similar with the one obtained with only 5 SAR observations. It suggests that when SVD is used for combing two time-overlapped deformation time-series, the optimal number of SAR observations during the time-overlapped period is approximately 5.

Ding-Optimization of the Combined C-X- Band Time-Overlapped Ground Deformation Time-Series Derived-145Poster4_Cn_version.pdf
Ding-Optimization of the Combined C-X- Band Time-Overlapped Ground Deformation Time-Series Derived-145Poster4_ppt_present.pdf


Poster
ID: 286 / Dr4 YSPS.1.1: 16
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32365 - Landslide Identification, Movement Monitoring And Risk Assessment Using Advanced Earth Observation Techniques

Unbalanced Technics to Improve the Train for ML Models to Detect Earthquake Fringes

Bruno Silva1, Joaquim J. Sousa2,3, Milan Lazecky4, António Cunha2,3

1Faculdade de Ciências da Universidade do Porto; 2Engineering Department, School of Science and Technology, University of Trás-os-Montes e Alto Douro; 3INESC Technology and Science, Porto, Portugal; 4COMET, School of Earth and Environment, University of Leeds, Leeds LS2 9JT, UK

There has been an increase in space-borne sensors for Earth observation in recent years, e.g., the Synthetic Aperture Radar (SAR). These sensors can obtain many images with different resolutions for the entire planet, even for the most remote areas. One of the applications is studying terrain deformations using Interferometric Synthetic Aperture Radar (InSAR) techniques. In 1992, the first demonstration of the InSAR technique, where the ERS-1 satellite generated an image of the deformation caused by the Landers earthquake. Since that time, there have been advances in this technique applied to studying all types of terrestrial deformations, with particular success in studying earthquakes and volcanoes. The success of InSAR has led to the interest of space agencies that have started to create SAR-only missions and make available an exponential increase in the SAR data, which become impossible to analyze manually. Machine Learning (ML) can automatically process large datasets in the most varied areas, including remote sensing data, and it has become an opportunity for earth observation. Recent studies have demonstrated the ML's ability to detect visible fringes in InSAR images caused by deformations such as earthquakes deformations. However, InSAR data is frequently unbalanced - deformations are sparse compared to those that do not have deformation, and it needs special attention for training ML models. There are several techniques to approach data unbalancing, such as synthetic data and focal loss. In this work, we created an earthquake dataset from the LICS database with 3100 images and are exploring unbalanced technics to improve the train for ML models to detect earthquake fringes.

Silva-Unbalanced Technics to Improve the Train for ML Models to Detect Earthquake Fringes-286Poster4_ppt_present.pdf


Poster
ID: 287 / Dr4 YSPS.1.1: 17
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32365 - Landslide Identification, Movement Monitoring And Risk Assessment Using Advanced Earth Observation Techniques

ML Segmentation Models to Automatically Identify Areas Affected by Earthquakes

Bruno Silva1, Joaquim J. Sousa2,3, Milan Lazecky2,3, António Cunha4

1Faculdade de Ciências da Universidade do Porto, Portugal; 2Engineering Department, School of Science and Technology, University of Trás-os-Montes e Alto Douro; 3INESC Technology and Science, Porto, Portugal; 4COMET, School of Earth and Environment, University of Leeds, Leeds LS2 9JT, UK

In the 20th century, scientists discovered that earthquakes occur due to the release of energy that was accumulated in tectonic faults. These natural phenomena occur with different intensities and scales. They can be felt from a few meters to kilometers from their epicenter depending on their magnitude and depth and cause significant damage and fatalities. Knowledge of the affected area is essential to avoid risks after the event, such as the collapse of buildings in short/medium term after the event. Since 1992, with the development of Interferometric Synthetic Aperture Radar (InSAR) techniques, it is possible to generate images of the deformations and visualize areas on the globe that have been deformed. With this great success, European Space Agency (ESA) developed Sentinel-1 with C-band and provided free access to SAR data bulks. The Centre for Observation and Modelling of Earthquakes, Volcanoes & Tectonics (COMET) make InSAR calculations and make them free available (https://comet.nerc.ac.uk/comet-lics-portal/). As this amount of data has become impossible to process manually and Machine Learning (ML) start to be used to process these data automatically. Several studies have been applying ML's ability to detect InSAR images with the fringes in InSAR images; however, no studies have been found where the area is isolated using segmentation techniques. In this work, we apply ML segmentation models to automatically identify areas affected by earthquakes in interferograms.

Silva-ML Segmentation Models to Automatically Identify Areas Affected-287Poster4_ppt_present.pdf


Poster
ID: 163 / Dr4 YSPS.1.1: 18
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32365 - Landslide Identification, Movement Monitoring And Risk Assessment Using Advanced Earth Observation Techniques

Recent Activity of Changbaishan Tianchi VolcanoRevealed by Time Series InSAR and Geophysical Modeling

Jiaqi Zhang1, Lianhuan Wei1, Cristiano Tolomei2, Guoming Liu3, Guido Ventura2, Elisa Trasatti2, Christian Bignami2, Stefano Salvi2, Tiejun Gao1, Francesca Romana Cinti2, Xianju Li4

1Northeastern University, China, People's Republic of; 2Istituto Nazionale di Geofisica e Vulcanologia, Italy; 3Changbaishan Volcano Observatory, China, People's Republic of; 4China University of Geosciences, China, People's Republic of

Changbaishan Tianchi volcano is located at the border of China and North Korea, which is the most complete Cenozoic polygenetic composite volcano preserved in China, and also the most active volcano with eruption potential in China. In history, the volcano has experienced several major eruptions, amongst which the Millennium eruption about 1000 years ago is one of the largest eruptions in the world during the past 2000 years. During the period from 2002 to 2005, the frequency and magnitude of seismicity in Tianchi volcano area increased significantly, and the gas geochemistry at several hot springs also changed significantly, indicating the volcanic activity entered an active period. After the active period, volcanic activity has returned to previous level. However, a volcanic swarm suddenly appeared on December 22, 2020, with 38 volcanic seismicity events of various types occurred. On March 5, 2021, another earthquake with magnitude of ML3.1 occurred, which is the largest VT (Volcanic-tectonic) type earthquake event after active volcanic disturbance period. These phenomena show that the volcanic seismic activity after December 2020 is beyond the background level, and monitoring of Tianchi volcano should be conducted continuously.
Traditional surface deformation monitoring methods, such as leveling and GPS observation, are limited by shortcomings of sparse space points and low accuracy, which are not able to reveal the spatial distribution of deformation information over a large area. On the other hand, Interferometric Synthetic Aperture Radar (InSAR) technology makes up for the shortcomings. Advanced time-series InSAR methods are able to overcome the influence of orbital errors, atmospheric artifacts, topographic errors and other errors in interferometric phase by analyzing long time series SAR data, and obtain large-scale and high-precision deformation monitoring results. Among the commonly used time-series InSAR methods, the Small Baseline Subset time-series InSAR (SBAS-InSAR) can effectively reduce the influence of temporal and spatial decorrelation due to its high image utilization, high spatial density and short baselines. It is more suitable for deformation monitoring of Tianchi volcano area, which long-time snow coverage and vegetation.
In this study, 19 ALOS-2 images from November 2018 to October 2020 were processed to estimate the surface deformation of Tianchi volcano area. Due to the large topographic inequality in the volcanic area, obvious vertical stratified atmospheric phase and topographic residual are detected and removed from the interferometric phase. The results show that the ground surface of Tianchi volcano is uplifting slightly during this period, and the closer to the crater, the more obvious the uplift. Geophysical modeling based on Mogi point source was also conducted using the SBAS-InSAR results, indicating a point source at the depth of approximately 3km. The modeled depth is in agreement with the depth of seismic events, which is possibly where hydrothermal activity is happening in the shallow magma chamber. Generally, this study provides data support for the monitoring of volcanic activity and future disaster assessment in Changbaishan Tianchi volcano, and verifies the feasibility of time series InSAR and geophysical modeling in applications of active volcanoes.

Zhang-Recent Activity of Changbaishan Tianchi VolcanoRevealed-163Poster4_Cn_version.pdf
Zhang-Recent Activity of Changbaishan Tianchi VolcanoRevealed-163Poster4_ppt_present.pdf


Poster
ID: 242 / Dr4 YSPS.1.1: 21
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32365 - Landslide Identification, Movement Monitoring And Risk Assessment Using Advanced Earth Observation Techniques

Collaborative Monitoring of Slope Displacements in Open-pit Mines with LiDAR DEM and Sentinel-1 Data

Fang Wang1, Lianhuan Wei1, Cristiano Tolomei2, Christian Bignami2, Yachun Mao1, Shanjun Liu1, Qiuyue Feng1

1Northeastern University, China, People's Republic of; 2Istituto Nazionale di Geofisica e Vulcanologia, Rome, Italy

Surface displacement monitoring of open-pit mines is of vital importance for the safety of field operators and mine production. With the Development of Synthetic Aperture Radar (SAR) remote sensing technology, Time series Interferometric SAR (TS-InSAR) has been widely used in wide-area displacement monitoring in recent decades. However, limited by the side-looking geometry, the estimated displacements in TS-InSAR are only in the satellite’s line-of-sight (LOS) direction, which are completely different from real displacements in areas with large topographic inequality, since displacements may occur in the three dimensional space in such areas. In translational landslide monitoring, an assumption that displacements generally happen parallel to the largest slope gradient is made. In order to resolve slope displacements of landslides, an accurate digital elevation model (DEM) aided slope displacement inversion method is proposed. The accurate DEM is generated by Light Detection and Ranging (LiDAR) scanning, used to minimize the topographic residual TS-InSAR analysis, and then in inversion of slope displacements from those in LOS.

In this paper, three stacks of Setinel-1 images (186 scenes) acquired from both ascending and descending orbits are used for SBAS analysis over Qidashan and Anqian open-pit mines, with temporal coverage from December 2016 to May 2019. In the SBAS processing, LiDAR DEM of the mining pits and TanDEM-X DEM with 3 arc second spatial resolution are used to remove the topographic phase. Accurate slope angles and aspects derived from the LiDAR DEM are used to estimate the slope displacements. In order to ensure high temporal sampling rate and high point density, a multi-master interferometry mode is adopted in the small baseline subsets (SBAS) method, with reduced spatio-temporal decorrelation problems. In SBAS, firstly, all the slave images are registered with the super master image, and small baseline differential interferograms are generated. Then, a minimum cost flow algorithm is used to unwrap the differential interferograms. After that, singular value decomposition method is adopted to combine the unwrapped differential interferograms and generate a time series which includes atmosphere, residual terrain and deformation signal. After that, the residual topography and atmosphere signals are eliminated by a second-order unwrapping and filtering, and finally the deformation rates and the cumulative deformation are retrieved. With the assistance of high-resolution LiDAR DEM, the deformation parameters in LOS are converted to slope direction using the radar incidence angle, heading angle, azimuth angle, slope aspects and angles.

The derived results are highly consistent with on-site GPS measurements and precipitation data. Based on the analysis of local precipitation changes, it is found that there is a correlation between deformation and precipitation. The results show that the stability of open-pit mines is mainly affected by rock mass structure, lithology and precipitation. SBAS method can be used as a routine tool to monitor the stability of open-pit mines, and provide technical support for disaster prevention and safe production.

Wang-Collaborative Monitoring of Slope Displacements in Open-pit Mines with LiDAR DEM and Sentinel-1_Cn_version.pdf
Wang-Collaborative Monitoring of Slope Displacements in Open-pit Mines with LiDAR DEM and Sentinel-1_ppt_present.pdf


Poster
ID: 343 / Dr4 YSPS.1.1: 22
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32365 - Landslide Identification, Movement Monitoring And Risk Assessment Using Advanced Earth Observation Techniques

Remote Sensing Observations for Landslide Identification in South Tyrol, Italy and the Longnan Region, China

Peter Mayrhofer1, Ruth Sonnenschein2, Clement Atzberger1, Giovanni Cuozzo2, Stefan Steger2

1University of Natural Resources and Life Sciences Vienna (BOKU), Austria; 2Eurac Research, Italy

Landslide inventory mapping is an essential asset for hazard assessment and mitigation. Despite significant progress in the development of automated image processing chains for landslide inventory mapping, tedious manual interpretation of aerial and satellite images remains the de facto standard (European Centre on Geomorphological and Seismological Hazards, 2017). Optical remote sensing is until today not used as an operational tool in contrast to SAR interferometry and LiDAR. The reasons are a lack of adapted image processing techniques that address the specific information needs of landslide investigations while remaining sufficiently generic to a broad range of different landslide types and environmental settings. This study investigates in automated change-detection workflows using annual Sentinel-2 (S2) composites and S2 multi-temporal imagery. Landslide areas in the time period 2015-2019 were analyzed based on already-known landslide location points, downslope-oriented moving windows and supervised classifications of change-vector-intensity and -angle using Receiver Operating Characteristic (ROC) curves. Subsequently, time-series analysis was applied on the resulting change-pixels to derive temporal breakpoints (i.e. the timing of the landslide occurrence). Our findings highlight that out of 65 reported landslide locations in South Tyrol, only 9 (13.8%) are recognizable by means of S2 imagery. Large landslides, however, were detectable both spatially and temporally by means of the multi-temporal change-detection approach. By applying a quantitative accuracy assessment for the independent test site in Longnan, China, our results show that the approach is highly transferable with minimal adjustments and is suitable for efficient spatial-temporal landslide mapping across large areas.

Mayrhofer-Remote Sensing Observations for Landslide Identification-343Poster4_ppt_present.pdf


Poster
ID: 267 / Dr4 YSPS.1.1: 23
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32431 - Seismic Activity Monitoring and Lithosphere Deformation Detection by Radar Interferometry in China and Surrounding Regions

Tectonic Studies At Continental Scale From FLATSIM Automated Time Series Analysis Of Sentinel-1 InSAR Data: Case Study Of The Eastern Tibetan Plateau.

Laëtitia Lemrabet1, Cécile Lasserre1, Marie-Pierre Doin2, Marianne Métois1, Anne Replumaz2, Philippe-Hervé Leloup1, Jianbao Sun3, Marie-Luce Chevalier4

1Université de Lyon, UCBL, ENSL, CNRS, LGL-TPE, 69622 Villeurbanne, France; 2Université Grenoble-Alpes, CNRS, ISTerre, Grenoble, France; 3Institute of Geology, China Earthquake Administration, Beijing, China; 4Key Laboratory of Continental Dynamics, Institute of Geology, Chinese Academy of Geological Sciences, 26 Baiwanzhuang Rd, Beijing 100037, China

One of the limitations in the characterization of Earth surface deformation lies in the compromise between wide spatial coverage, high spatial resolution, and high temporal resolution. Today, Sentinel-1 constellation overrides this limit by providing global and systematic coverage, opening up new perspectives for monitoring surface deformation.

We focus our study on the oriental part of the Tibetan plateau, where major strike-slip and thrust faults combine to accommodate its overall eastward extrusion.

Here, we present the first FLATSIM automated time series analysis of Sentinel-1 data, acquired over the period 2014-2020 along 1200 km-long tracks on seven ascending and seven descending orbits. FLATSIM (ForM@Ter LArge-scale multi-Temporal Sentinel-1 InterferoMetry) is an automated Sentinel-1 InSAR processing chain based on the NSBAS approach (Doin et al., 2011, Grandin, 2015), implemented at CNES high-performance computer center in Toulouse in the framework of the french Data and Services Center ForM@Ter.

Our study area covers in total 1 700 000 km2, We provide the phase evolution through time for this area as well as average velocity maps with a 160 m spatial resolution.

After time series inversion, we proceed to a source separation to identify seasonal signals and perform a referencing in ITRF2008 of the average velocity maps on all tracks in eastern Tibet with a new GPS-InSAR adjustment method using a minimum number of parameters. These referenced InSAR data are then decomposed into horizontal and vertical motion contributions and inverted with the latest published GPS velocity field using the T-DEFNODE elastic block model. This allows to discuss strain localization and rates at a regional scale in the light of the tectonic and geological evolution of this area.



Poster
ID: 168 / Dr4 YSPS.1.1: 24
Poster for Dragon 4
Land & Environment: 32248 - Earth Observation Based Urban Services for Smart Cities and Sustainable Urbanization

A Tool for relating Land Surface Temperature to Near-Air-Surface Air Temperature in Support of Urban Climate Studies and Smart Urbanization

Kostas Philippopoulos, Constantinos Cartalis

National and Kapodistrian University of Athens, Greece

Urbanization accelerates the deterioration of the urban thermal environment, which is characterized by increased spatial variability. Consequently, sustainable urbanization strategies require air temperature information in high-resolution for the provision of effective solutions and countermeasures to thermal stress. The existing networks of in-situ air temperature observations fail to describe effectively the thermal spatial variability and thus statistical modelling approaches based on Earth Observation (EO) data can contribute towards this end.

The proposed data-driven modelling framework/tool can be used to provide insight on the state of the thermal environment in high-resolution and consists of the following:

  1. Downscaling of medium resolution EO data.
  2. Development of a regional air temperature database.
  3. Artificial Neural Network (ANN) modelling approach.
  4. Construction of high-resolution spatio-temporal air temperature fields.

The framework is based on using the high temporal resolution thermal infrared imagery in combination with high spatial resolution data, also in the thermal infrared. The initial step is the downscaling of Land Surface Temperature (LST) to higher spatial resolution via a disaggregation method to obtain sub-daily and high spatial resolution LST information. In addition, the modelling framework supports the use of multi-source meteorological data that includes in-situ observations from weather stations and field experiments/campaigns, along with high-quality reanalysis products. The ERA5-Land dataset (produced by ECMWF as part of the Copernicus Climate Change Service), which provides hourly high-resolution climate information can be used upon validation, as an auxiliary dataset for enhancing the available observational databases with high-quality data. The use of ANNs facilitates the development of a statistical model that incorporates the non-linear interactions that formulate the relationship between EO data with the near-surface air temperature in the urban environment. The complexity of this relationship is highly dependent on the surface energy budget and requires the application of sophisticated data-mining approaches. The use of the trained ANN models results into the construction of long-term spatio-temporal air temperature fields that provide the required level of information regarding the local thermal conditions and thus can be effectively used in urban strategies for enhancing resilience to thermal risks.

Case-study results and validation, demonstrate the efficiency of the framework for providing accurate estimates that are useful for improving the understating on how LST relates with the near-surface air temperature in urban areas. The EO retrievals of LST could be used to create high-resolution air temperature estimates that are useful in urban climate science and for supporting smart urbanization plans. Furthermore, as a tool towards sustainable urbanism, the framework can be also applied even in areas with sparse weather observation networks and can provide accurate estimates of the local variation of near-surface air temperature for studying critical phenomena such the urban heat island.

Philippopoulos-A Tool for relating Land Surface Temperature to Near-Air-Surface Air Temperature-168Poster4_Cn_version.pdf


Poster
ID: 248 / Dr4 YSPS.1.1: 25
Poster for Dragon 4
Land & Environment: 32194 - Crop Mapping with combined use of European and Chinese Satellite Data

Study on the Identification of Rice Varieties with Remote Sensing Data

Yanan Hao1, Ruilian Li1, Jinlong Fan2

1China Agricultural University, China, People's Republic of; 2NSMC, China, People's Republic of

Abstract: Heilongjiang Sanjiang Plain has naturally unique advantage in development of model agriculture with abundant land resources, large connected arable fields. In recent years, the emergence of various kinds of high spatial and temporal resolution satellites data has strongly promoted the integration and combination of agricultural remote sensing, global navigation technology and Internet of things technology and then played an important role in support of crop classification, accurate agricultural production management, yield estimation and pest control. In this study, the Chuangye farm in the plain was selected as the study area. The sentinel 2 time series images during the growing season of 2020 were downloaded from the official website https://scihub.copernicus.eu. The samples were collected from Google Earth high-resolution image, query with farmers and field survey. The Random Forest algorithm was applied to implement the classification. Finally, the error matrix revealed that the overall accuracy of rice variety classification in the study reached 70%.

Key words: Rice; Crop classification; Agricultural Remote Sensing; Sentinel Satellite; Dragon Program

Hao-Study on the Identification of Rice Varieties with Remote Sensing Data-248Poster4_Cn_version.pdf
Hao-Study on the Identification of Rice Varieties with Remote Sensing Data-248Poster4_ppt_present.pdf


Poster
ID: 243 / Dr4 YSPS.1.1: 26
Poster for Dragon 4
Land & Environment: 32426 - Calibration and Data Quality Assurance for Quantitative Remote Sensing

The Feasibility Of Using Re-analysis Data As Thermal Infrared Radiometric Calibration Reference

Ya Nan Xue1,2, Ning Wang1, Lingling Ma1, Xinhong Wang1, Kun Li1

1Aerospace Information Research Institute, Chinese Academy of Sciences, China, People's Republic of; 2School of Optoelectronics, University of Chinese Academy of Sciences, China, People's Republic of

The re-analysis data can provide global gridded surface temperature, albedo, atmospheric profile and other parameters in continuous spatial and temporal dimensions. The atmospheric profile information derived from re-analysis data had been used in radiometric calibration and validation in infrared band by some researchers, together with the support of sea surface temperature (SST) measured by buoys. However, the spatial distribution of buoy data is uneven and there are many interference factors in the observation of buoy data. In order to reduce the cost and the complexity of calibration procedure, at the same time to increase the calibration frequency, it is a feasible way to use both the SST and atmospheric profile information extracted from the re-analysis data. However, one of the prerequisite is to check the accuracy of re-analyzed SST and consistency with other observations, and subsequently the reliability of the simulated top-of-atmosphere (TOA) based on the re-analysis data should also be verified. This study takes the ocean as research target to carry out the comparison and verification of SST and TOA brightness temperature from different sources, including the re-analyzed data from the European Center for Medium-Range Weather Forecast (ECMWF) ERA5, the buoys measured data, the satellite observations and related SST product. This study provides support for thermal infrared radiation calibration based on re-analysis data.

First, the comparison of ERA5 SST and ARGO buoy STT was carried out. ARGO buoy data was used in the South China Sea from 2008 to 2018. The results show that the annual maximum RMSE between ERA5 SST and ARGO SST is 0.53K, and the minimum RMSE is 0.42K. Next, comparisons between ERA5 SST and MODIS SST were carried out, with both the daily data covering the whole global area, and the annual data in the ocean area surrounding China. The results show that these data are highly consistent when the range of SST is big enough. The correlation coefficient between the two types of daily data is above 0.99, and the RMSE is 0.4K-0.65K. Finally, ERA5 SST and atmospheric profile data were used to simulate MODIS 31 band TOA brightness temperature, using MODTRAN atmospheric radiometric transfer model, and those simulations were compared with MODIS observations. The results show that the annual RMSE is within 0.7K in the marine areas surrounding China.

Xue-The Feasibility Of Using Re-analysis Data As Thermal Infrared Radiometric Calibration Reference-243Poster4_Cn_version.pdf
Xue-The Feasibility Of Using Re-analysis Data As Thermal Infrared Radiometric Calibration Reference-243Poster4_ppt_present.pdf


Poster
ID: 244 / Dr4 YSPS.1.1: 27
Poster for Dragon 4
Land & Environment: 32426 - Calibration and Data Quality Assurance for Quantitative Remote Sensing

Construction And Validation Of TOA Reflectance Reference Model For Stable Land Surface Target- Using Golmud Gobi Site As An Example

Peilan Song1,2, Lingling Ma1, Yongguang Zhao1, Ning Wang1, Yaokai Liu1, Wan Li1

1Aerospace Information Research Institute, Chinese Academy of Sciences, China, People's Republic of; 2School of Optoelectronics, University of Chinese Academy of Sciences, China, People's Republic of

Pseudo invariant calibration sites (PICSs) have the advantages of high surface reflectance, low latitude, low aerosol thickness, low cloud cover frequency and so on, so they are very suit for monitoring the stability of sensors. In recent years, the TOA reflectance variation and modeling of PICS have attracted the attention of many researchers and organizations including CEOS WGCV/IVOS. Algeria 3, Algeria 5, Libya 1, Libya 4, Mauritania 1 and Mauritania 2 were identified as pseudo invariant calibration sites during the CEOS IVOS-19 meeting in 2008. However, PICS are currently distributed in the Sahara Desert in North Africa and the Middle East. It is difficult to apply them to the Chinese land satellites, which are mostly imaged in China. Therefore, this study analyzes and evaluates the site characteristics of the high-altitude Golmud Gobi site located around the Qaidam Basin in Qinghai Province, China, and proposes a TOA reflectance modeling method for inland stable targets. The TOA reflectance model of the Golmud Gobi site was established by using the long-time TOA reflectance product of MODIS, and the applicability and error analysis of the model were carried out, including:

Ⅰ)Based on the ECMWF re-analysis database, the changes of atmospheric parameters such as water vapor content, ozone content, and aerosol optical thickness in the Qaidam Basin of Qinghai Province were analyzed. The Golmud Gobi site with the best atmospheric and surface stability conditions was then selected for the measurements of site characteristics, including directional characteristics observation with UAV, spectral observation with field spectrometer SVC, and aerosol observation with CE318, etc. Finally, the surface BRDF data of the site was obtained.

Ⅱ)The Sentinel2A/2B cloudless surface reflectance data from April to September 2020 were analyzed. The surface reflectance data of B2/B3/B4/B8 with 10m resolution in each landscape image was screened with the spatial uniformity <3% as the constraint condition. Finally, a 5km*5km Gobi site with both spatial uniformity and temporal stability better than 3% was obtained.

Ⅲ)The TOA reflectance model of Golmud Gobi land site was finally established by analyzing the regularity between the MODIS TOA reflectance time-series data from 2010 to 2019 and SZA/VZA/RAA/DOY. When VZA is less than 35 degrees and VZA minus SZA is less than ±30 degrees, the mean and standard deviation of the relative error between the modeled TOA reflectance and observed TOA reflectance in each band are better than 0.08% and 2.7% respectively. Meanwhile, compared with the TOA reflectance measured by Sentinel2B/MSI sensor for in B2/B3/B4/B8A/B12 bands, the relative error of the TOA reflectance predicted by the model is 0.01%~4%.

Song-Construction And Validation Of TOA Reflectance Reference Model-244Poster4_Cn_version.pdf
Song-Construction And Validation Of TOA Reflectance Reference Model-244Poster4_ppt_present.pdf


Poster
ID: 323 / Dr4 YSPS.1.1: 28
Poster for Dragon 4
Land & Environment: 31470 - Forest biophysical retrievals and land cover dynamics using multi-temporal, multi-sensor (SAR-optical-LiDAR) and multi-resolution EO sensors for China and selected Asian regions (FOREST Dragon 4)

Improved Reconstruction of Digital Terrain Models Below Tropical Forests Using Tomographic SAR Data Acquired at P Band

Mael Smessaert2,3, Ludovic Villard2, Laurent Polidori2, Sandrine Daniel3, Laurent Ferro Famil1

1University of Rennes 1, France; 2Cesbio, France; 3Capgemini, France

Digital Terrain Model (DTM) is one of the main products of Earth observation from space, and spaceborne SAR interferometry is a unanimously recognized technique for accurately mapping ground topography at a wide scale. Nevertheless, such approches meet difficulties over densely forested areas due to both wave penetration problems and signal decorrelation with time. In this context, the BIOMASS mission, which will operate the first orbital P-band radar in order the map forest biomass at global scale, is also expected to provide a global DTM over forested areas, as its larger wavelength and short revisit time allows to overcome both the aforementioned penetration and decorrelation issues. This poster proposes a technique for retrieving the topography of the ground lying below dense forest covers, such as tropical forests, based on the use of P band Polarimetric Tomographic SAR acquisitions (PolTomoSAR). It is based on the regularization of tomographic estimates performed according to geophysical constraints on the estimated surface. In particular, this techniques aims to prevent discontinuities due sudden and significant variations of scattering mechanisms and to avoid over filtering, generally associated to the estimation of PolTomoSAR covariance matrices. The performance of the proposed technique is assessed over data acquired by the ONERA RAMSES sensor at P band over the test site of Paracou, in French Guiana.



Poster
ID: 313 / Dr4 YSPS.1.1: 29
Poster for Dragon 4
Land & Environment: 31470 - Forest biophysical retrievals and land cover dynamics using multi-temporal, multi-sensor (SAR-optical-LiDAR) and multi-resolution EO sensors for China and selected Asian regions (FOREST Dragon 4)

A Covariance-based Feature Extraction Method for Temporal PolSAR

Jun Ni1, Qiang Yin1, Fan Zhang1, Wen Hong2

1Beijing University of Chemical Technology, China, People's Republic of; 2University of Chinese Academy of Sciences

With the rapid development of spaceborne SAR systems, temporal polarimetric SAR (PolSAR) image data has become an important research topic. The temporal data contain helpful information about the scene and are also related to the time evolution of the scene. Analyzing and developing this information in SAR time series is an essential and challenging task. Based on the time series polarization SAR data structure, this paper constructs the time series- polarimetric features. Through the characteristic analysis and dynamic analysis of the covariance matrix, the time-polarization features of the PolSAR image can be obtained. The time-polarimetric feature provides a feature reference basis for the temporal PolSAR classification.

Ni-A Covariance-based Feature Extraction Method for Temporal PolSAR-313Poster4_Cn_version.pdf
Ni-A Covariance-based Feature Extraction Method for Temporal PolSAR-313Poster4_ppt_present.pdf


Poster
ID: 327 / Dr4 YSPS.1.1: 31
Oral Presentation for Dragon 4
Land & Environment: 31470 - Forest biophysical retrievals and land cover dynamics using multi-temporal, multi-sensor (SAR-optical-LiDAR) and multi-resolution EO sensors for China and selected Asian regions (FOREST Dragon 4)

Forest Height Inversion Using X-Band Single-Pass InSAR Data Based on Multi-Level Model

Lei Zhao1, Erxue Chen1, Zengyuan Li1, Wangfei Zhang2, Kunpeng Xu1

1Institute of Forest Resources Information Techniques, Chinese Academy of Forestry; 2Southwest Forestry University

A multi-level model (MLM) for forest height inversion is introduced and investigated using X-band single-pass interferometric synthetic aperture radar (InSAR) data. Compared with the two-level model (TLM), as a generalized model, the MLM is more in line with the characteristics of forest structure and the scattering mechanism for X-band data. Based on the MLM model, three simplified MLM models were derived: TLMm, SINC and MTND. An improved method of calculating coherence considering the assumptions of the MLM model is proposed. Airborne X-band single-pass InSAR data and LiDAR H100 data were used to verify the proposed new approach. The results showed that the MTND model can obtain more reliable and accurate inversion results compared to the SINC model and the TLMm. And the inversion accuracy of forest height can be effectively improved by ensuring that the theoretical models and calculations of coherence obey the same assumptions.

Zhao-Forest Height Inversion Using X-Band Single-Pass InSAR Data Based-327Oral4.pdf


Poster
ID: 189 / Dr4 YSPS.1.1: 32
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32431 - Seismic Activity Monitoring and Lithosphere Deformation Detection by Radar Interferometry in China and Surrounding Regions

Sequential InSAR Time Series Deformation Monitoring of Land Subsidence and Rebound in Xi'an, China

Baohang Wang, Chaoying Zhao, Qin Zhang

Chang'an University, China, People's Republic of

The Xi’an, China has suffered from severe land subsidence and ground fissure hazards since the 1960s. With the progress of economic development and urbanization, groundwater was over-exploited for more than 50 years. Consequently, it had caused the formation of fourteen ground fissures accompanying land subsidence throughout the city. The maximum land subsidence rate reached 300 mm/year in 1996, and the maximum cumulative subsidence reached 3 m approximately in last 60 years, which has threatened and will continue to threaten the safety of urban artificial constructions.

InSAR time series deformation monitoring plays an important role in revealing the historical displacement of the Earth’s surface. In order to study the spatiotemporal characteristics of subsidence and ground fissures, previous studies show that there existed a close spatiotemporal relationship between land subsidence and the formation of earth fissures. The degradation of the aquifer system is the one of the key factors to these typical deformations. In order to alleviate the land subsidence and ground fissures caused by over-extraction of groundwater, the pumping groundwater was restricted in 1996, meanwhile, water was supplied from Heihe River. Moreover, cumulative volume of 1552800 m3 had been recharged in Xi'an from 2009 to 2014.

In order to retrieve the history of land subsidence in Xi’an, we employed the sequential estimation method to update the time series deformation dynamically, which is an efficient InSAR tool to update the surface deformation as quickly as possible, when the SAR image is acquired one by one. In the experimental section,we take 83 Sentinel-1A images acquired from 20 June 2015 to 17 July 2019 to show the performance of the method and to analyze the evolution of land subsidence in Xi'an, China. For the sequential InSAR time series deformation processing, we divide SAR data into two groups. The first group is the archived SAR data for parameters initialization. While the second group is newly received SAR image (i.e., a new SAR acquisition) to update the new deformation parameter.

Results show three surface deformation phenomena occurred in Xi’an city from 20 June 2015 to 17 July 2019, i.e. continuous land subsidence, slow uplift and rebound after long-term subsidence, which can be explained as the response to the underground water changes in different regions. As for the response tothe artificial water injection, the rebound pattern can be further divided into immediate elastic recovery deformation and time-dependent visco-elastic recovery deformation.

Wang-Sequential InSAR Time Series Deformation Monitoring-189Poster4_Cn_version.pdf
Wang-Sequential InSAR Time Series Deformation Monitoring-189Poster4_ppt_present.pdf


Poster
ID: 156 / Dr4 YSPS.1.1: 33
Poster for Dragon 4
Solid Earth & Disaster Risk Reduction: 32431 - Seismic Activity Monitoring and Lithosphere Deformation Detection by Radar Interferometry in China and Surrounding Regions

Mapping vertical crustal deformation over Weihe Basin, China using Sentinel-1 and ALOS-2 ScanSAR imagery

Yufen Niu1, Feifei Qu1, Wu Zhu1, Qin Zhang1, Zhong Lu2, Chaoying Zhao1, Wei Qu1, Yaxuan Hu3

1College of Geology Engineering and Geomatics, Chang’an University, Xi’an, 710054, China; 2Department of Earth Sciences, Southern Methodist University, Dallas, TX, 75275, USA; 3The Second Monitoring and Application Center, China Earthquake Administration, Xi’an 710054, China

Weihe Basin is located in Shaanxi Province, central China, bordering the south of Ordos block in the Weibei uplift belt, the north of North Qinling orogenic belt, the east of the southwestern margin of the Ordos arc structural belt, and the west of the Shanxi uplift belt, which plays an important role in the well-known Fen-Wei seismic belt, spanning 350km from east to west. Hundreds of active faults were discovered over the basin in history, and most of these deeply buried faults criss-crossed the basin . The main faults that control the sedimentary basin formation include Beishan Piedmont fault, Guanshan fault, Qinling North Piedmont fault, Chang'an-Lintong fault, and Lishan Piedmont fault. Weihe Basin is characterized by intense crustal activity, and more than 25 earthquakes have been recorded with magnitude larger than 5.0 since 1177. One MS 8.0 earthquake occurred in Huaxian was recorded in 1556, however, there are no documented cases greater than MS 5.5 since the 20th century.

In order to understand the structure and slip rate of the known fault zones, identify potential active faults as well as their activity intensities, and compensate for the existing discrete located GPS and leveling measurements in Weihe Basin, 92 scenes ascending Sentinel-1 (06/20/2015-05/30/2019) and 6 scenes descending ALOS-2 ScanSAR (04/01/2015-12/19/2018) datasets were utilized to derive LOS deformation velocity respectively. The geoid offset correction between EGM96 datum and WGS84 datum was applied to the 1-arc-second (~30 m) Shuttle Radar Topography Mission (SRTM) DEM, that is used as an external DEM to remove the topographic phase from the interferograms for both the Sentinel-1 and ALOS-2 ScanSAR processing. GACOS atmospheric products are employed to reduce the effects of tropospheric delay. Then the deformation components in the east-west and vertical directions are estimated using the descending and ascending InSAR images together over the entire basin. The standard deviation of vertical deformation between InSAR and leveling measurement is around 2 mm/yr. InSAR measurements allow us to position not only the previously known faults, but also new active fault not previously revealed, which indicates that the complex internal motion within the Weihe Basin could be controlled by multiple faults. Finally, we calculate the slip rates and blocking depths of the Longxian-Mazhao fault, Puyang-Lantian, the southern part of Weihe fault, and the Kouzhen-Guanshan fault, and evaluate their potentials to arise large earthquakes.

Niu-Mapping vertical crustal deformation over Weihe Basin, China using Sentinel-1 and ALOS-2 ScanSAR_Cn_version.pdf
 
10:15am - 1:00pmDr4 YSPS.2.1: Young Scientists Poster Session on Ocean & Coastal Zones, Atmosphere, Cryosphere, Hydrology
Workshop: Dragon 4

10:15-11:15 CEST     Poster Session (for all participants)

11:15-11:30                 BREAK

11:30-13:00 CEST     Poster Session (for adjudicators & poster authors)

Dragon 4 
 
Poster
ID: 125 / Dr4 YSPS.2.1: 1
Poster for Dragon 4
Oceans & Coastal Zones: 32292 - The Research of New Ocean Remote Sensing Data for Operational Application

Icebergs Recognition for Xuelong Ship Channel in Amundsen Sea Using Sentinel-1 Data

Zhenyu Liu1, Xi Zhang2

1South-Central Universtiy for Nationalities, China, People's Republic of; 2First Institute of Oceanography, MNR

At 10:47 on January 19, 2019(Beijing time), the Xuelong ship, which carried out the 35th Antarctic survey mission, sailed in the dense ice area of the Amundsen Sea. Due to the influence of dense fog, Xuelong collided with the iceberg at 69 ° 59.9 ′ south latitude and 94 ° 04.2 ′ west longitude. A SAR image covering the same area was acquired by Sentinel-1 with HH polarization and pixel resolution of 40m at 10:41 on the same day. The research objective is to evaluate the potential of Sentinel-1SAR images to identify icebergs, especially whether the icebergs that hit the Xuelong can be detected to issue early warnings in advance. In addition to the Sentinel-1 data, the research data also includes the location information of the Xuelong provided by the ship's automatic identification system. First the Xuelong ship is detected according to AIS data. Then area of interest around the ship in the image is cropped. CFAR algorithm fit for iceberg detection is select to automatically identify the iceberg. Finally by the visual interpretation, the result is to determine whether the iceberg hitting Xuelong ship can be detected using Sentinel-1 data and the smallest size iceberg.

Liu-Icebergs Recognition for Xuelong Ship Channel in Amundsen Sea Using Sentinel-1 Data-125Poster4_Cn_version.pdf


Poster
ID: 144 / Dr4 YSPS.2.1: 2
Poster for Dragon 4
Oceans & Coastal Zones: 32292 - The Research of New Ocean Remote Sensing Data for Operational Application

Impact Assessment Of Fully-Focused SAR Along-Track Resolution To Sea State Parameters

Ferran Gibert, Alba Granados, Albert Garcia-Mondéjar, Eduard Makhoul, Mònica Roca

isardSAT SL, Barcelona, Catalonia. Spain

Nowadays, conventional Delay-Doppler processors (DDP) are continuously operating with data from satellites such as Sentinel-3 and CryoSat-2, providing surface waveforms with along-track resolution around 300m. Such a resolution is the maximum achievable with DDP methods, which process the echoes received within a burst in a coherent way but then combine the echoes from multiple burst incoherently. However, new Fully-Focused SAR (FF-SAR) techniques are expected to improve along-track resolution down to around 1m by coherently combining all the echoes received during the whole observation time. Such a step ahead in resolution opens a new set of possibilities to study the impact of along-track resolution in the evaluation of some sea state parameters.

Indeed, parameters such as the Significant Wave Height (SWH) when retrieved with DDP analytical retrackers often present residual bias that are related to how the illuminated scatters recombine within the 300m DDP footprint into the final waveform. In this sense, usage of FF-SAR processors offers the opportunity to study the SWH dependence on waveforms computed with along-track resolutions much smaller than 300m. Still, current radar altimeters operate at close-burst, which is a non-optimal mode for FF-SAR processing and therefore the presence of along-track replicas affects the measurements.

In this contribution we therefore present a comparison analysis of sea state variables retrieved by evaluating the Fully-Focused SAR processor with different along-track resolutions and multi-looking parameters. We have processed a set of Sentinel-3 passes over the Yellow Sea with a local Fully-Focused SAR processor implemented in time domain. The retracker considered is based on an analytical retracker developed specifically for DDP and adapted to operate with FF-SAR.

Gibert-Impact Assessment Of Fully-Focused SAR Along-Track Resolution-144Poster4_Cn_version.pdf


Poster
ID: 155 / Dr4 YSPS.2.1: 3
Poster for Dragon 4
Oceans & Coastal Zones: 32292 - The Research of New Ocean Remote Sensing Data for Operational Application

Evaluation of merged sea-ice thickness from Cryosat-2 and Sentinel-3A Altimeters in Arctic

Meng Bao1,2, Xi Zhang1,2, Jun min Meng1,2

1First Institute of Oceanography, Ministry of Natural Resources, China, People's Republic of; 2Ocean Telemetry Technology Innovation Center, Ministry of Natural Resources China, People's Republic of

Sea ice thickness is one of the important environmental parameters describing the material balance of sea ice and controlling regional heat exchange, which has an extremely important impact on global climate change, resource development and shipping in polar regions. In the past three decades, with the development of sea ice remote sensing technology, satellite altimeters can achieve sea ice thickness observation on a global scale, and a variety of satellite sea ice thickness data products have been publicly released. These products usually provide complete coverage of the polar region for one month, which is limiting for polar sea ice monitoring and sea ice forecasting applications. The recently launched CryoSat-2 and Sentinel-3A, both carrying SAR mode sensors operating in Ku-band, are able to invert sea ice thickness more accurately. Due to the different orbital configurations, the two satellites have a low spatial overlap, making the fusion of sea ice thickness data possible. In this study, we propose to use the spatial complementarity of CryoSat-2 and Sentinel-3A to realize a half-month sea ice thickness fusion product in the Arctic region. The results are also compared and analyzed with Operation IceBridge (OIB) airborne measurement data and Beaufort Gyre Explorer Project (BGEP) elevation sonar actual measurement data to verify the accuracy of this fusion product.

Bao-Evaluation of merged sea-ice thickness from Cryosat-2 and Sentinel-3A Altimeters-155Poster4_Cn_version.pdf
Bao-Evaluation of merged sea-ice thickness from Cryosat-2 and Sentinel-3A Altimeters-155Poster4_ppt_present.pdf


Poster
ID: 237 / Dr4 YSPS.2.1: 4
Poster for Dragon 4
Oceans & Coastal Zones: 32249 - Synergistic Monitoring of Ocean Winds, Waves and Storm Surges from Multi-sensors

Analysis of Coastal Wind Speed Retrieval from CYGNSS Mission Using Artificial Neural Network

Xiaohui Li1,2, Dongkai Yang1, Jingsong Yang2, Gang Zheng2, Guoqi Han3, Yang Nan4, Weiqiang Li5

1School of Electronic and Information Engineering, Beihang University, Beijing, China; 2State Key Laboratory of Satellite Ocean Environment Dynamics, Second Institute of Oceanography, Ministry of Natural Resources, Hangzhou, China; 3Fisheries and Oceans Canada, Institute of Ocean Sciences, Canada; 4Wuhan University, Wuhan, China; 5Institute of Space Sciences (ICE, CSIC), Spain

This paper demonstrates the capability and performance of sea surface wind speed retrieval in coastal regions (within 200 km away from the coastline) using spaceborne Global Navigation Satellite System Reflectometry (GNSS-R) data from NASA's Cyclone GNSS (CYGNSS) mission. The wind speed retrieval is based on the Artificial Neural Network (ANN). A feedforward neural network is trained with the collocated CYGNSS Level 1B (version 2.1) observables and the wind speed from European Centre for Medium-range Weather Forecast Reanalysis 5th Generation (ECMWF ERA5) data in coastal regions. An ANN model with five hidden layers and 200 neurons in each layer has been constructed and applied to the validation set for wind speed retrieval. The proposed ANN model achieves good wind speed retrieval performance in coastal regions with a bias of −0.03 m/s and a RMSE of 1.58 m/s, corresponding to an improvement of 24.4% compared to the CYGNSS Level 2 (version 2.1) wind speed product. The ANN based retrievals are also compared to the ground truth measurements from the National Data Buoy Center (NDBC) buoys, which shows a bias of −0.44 m/s and a RMSE of 1.86 m/s. Moreover, the sensitivities of the wind speed retrieval performance to different input parameters have been analyzed. Among others, the geolocation of the specular point and the swell height can provide significant contribution to the wind speed retrieval, which can provide useful reference for more generic GNSS-R wind speed retrieval algorithms in coastal regions.

Li-Analysis of Coastal Wind Speed Retrieval from CYGNSS Mission Using Artificial Neural Network-237Poster4_Cn_version.pdf
Li-Analysis of Coastal Wind Speed Retrieval from CYGNSS Mission Using Artificial Neural Network-237Poster4_ppt_present.pdf


Poster
ID: 188 / Dr4 YSPS.2.1: 5
Poster for Dragon 4
Oceans & Coastal Zones: 32405 - Monitoring Dynamics Of Coastal Wetlands And Suspended Sediment With High (Temporal/Spatial/Spectral) Resolution Satellite Images

Is Atmospheric Correction Needed For Deep Learning Methods To Successfully Segment Phytoplankton Blooms?

Stephen Goult1,2, Chunbo Luo2, Stefan Simis1, Shubha Sathyendranath1, Tingwei Cui3

1Plymouth Marine Laboratory, United Kingdom; 2University of Exeter, United Kingdom; 3Sun Yat-Sen University, China

Data preparation is critical to the development of deep learning methods and can mean the difference between an inaccurate or highly accurate model. In standard deep learning image segmentation applications, data preparation normally takes the form of standardising input image sizes, colour and contrast adjustments, and augmentation such as randomised rotation and image cropping to vary the training process and improve accuracy while also reducing overfitting to training datasets.

Multi- and hyper- spectral satellite earth observation data offer many more channels than the consumer cameras used to train the majority of deep learning approaches. Standard pre-processing techniques, such as atmospheric correction, can be applied to earth observation data but, without consideration to their effects, they may remove or alter information that could prove valuable in a deep learning context. Theoretically, a deep learning neural network should be able to make use of all available waveband channels without alteration to achieve best accuracy.

The process of atmospheric correction uses dedicated wavebands and fitting procedures to separate the contributions of water, atmosphere and adjacent land prior to the interpretation of biogeochemical water quality from satellite imagery. The atmospheric correction combines known physics of the interaction of light with the various media and spectral optimisation approaches to remove up to around 90% of the at-sensor signal. This raises two questions. The first is whether atmospheric correction may remove features that deep learning networks can exploit to distinguish between objects. Reciprocally, it is worth exploring whether atmospheric correction over water could benefit deep learning networks by contributing to the level of harmonization in the input data, as the variable atmospheric influence is (in the ideal situation) removed.

To evaluate the need for atmospheric correction when applying deep learning for segmentation of objects in water, we prepared a training dataset processed to three levels of atmospheric correction. These are: (1) no correction (i.e., top of atmosphere), (2) correction for Rayleigh scattering to produce bottom-of-Rayleigh reflectance and (3) atmospheric correction using the POLYMER atmospheric correction tool. The dataset consists of coastal and inland waterbodies assembled from 150 Sentinel-2 MSI observations divided into 55,000 image tiles of varying sizes covering multiple sites across North America, South Africa and China and extensively labelled for the presence of phytoplankton blooms, land, water and cloud to be compatible with Deep Learning methods. This dataset was used to train a variation of Mask-RCNN to segment algal blooms.

We find that a priori atmospheric correction provides significant accuracy gains. Using all 13 MSI wavebands provides maximum accuracy, while subsets of 5 and 3 wavebands can be used with an accuracy loss of less than 10%, which suggests transferability of the method to sensors with alternative spectral capabilities may be possible.

Goult-Is Atmospheric Correction Needed For Deep Learning Methods-188Poster4_ppt_present.pdf


Poster
ID: 177 / Dr4 YSPS.2.1: 6
Poster for Dragon 4
Oceans & Coastal Zones: 32235 - Microwave Satellite Measurements for Coastal Area and Extreme Weather Monitoring

A More Comprehensive Understanding of Coastal Flooding in SAR Imagery Based on Unsupervised Deep Learning

Bin Liu1, Xiaofeng Li2, Gang Zheng3

1Shanghai Ocean University, China, People's Republic of; 2Institute of Oceanology, Chinese Academy of Sciences, China, People's Republic of; 3Second Institute of Oceanography, Ministry of Natural Resources, China, People's Republic of

Tropical cyclone (TC)-induced coastal flooding is a dangerous natural hazard to coastal areas. It is the combined influence of storm surge-caused ocean water inundation and heavy rain-caused river water flooding. TC-induced coastal flooding causes massive loss of life and property in coastal areas, where most of the world's population and mega-cities are densely distributed.

Accurate mapping of coastal flooding is important in several aspects: (1) it can assist the management to accurately evaluate the loss and make more suitable disaster relief plans; (2) it can help the scientists to better understand the flooding mechanisms and develop more precise forecasting models; and (3) the flooding extent information can be converted into the flooding depth information.

Synthetic aperture radar (SAR) is a suitable remote sensing means for coastal flooding mapping, since it can provide a day-and-night, all-weather sensing ability and high-resolution images of the flooded scene. In addition, SAR is sensitive to surface flooding, and sometimes it can extract flooding under vegetation. The traditional methods for coastal flooding mapping in SAR images are mainly based on image processing techniques by using backscattering, statistical, and polarimetric information. The traditional methods use pre-defined features and/or rules based on human observation and design. Due to the limitations of human-designed features and rules, it is difficult for them to provide robust performance under various influences, including speckle noise, SAR imaging system parameters, temporal mis-registration, meteorological conditions, and environmental differences.

The rapidly-developed deep learning technology in the big data era provides a promising solution for robust coastal flooding mapping in SAR imagery. In the deep learning paradigm, the deep convolutional neural networks (DCNN) are suitable for image information mining. In the DCNN models, the features for robust image pattern recognition and classification are mined from a large volume of input data, instead of being pre-defined with human's observation of a limited amount of data. These data-driven models with the help of domain knowledge have the advantages of providing robust features for pattern recognition and classification under various influences. In our previous work, we proposed an improved DCNN model which provides robust performance for coastal flooding mapping from bi-temporal and dual-polarization SAR images, and verified this model is useful for geospatial and temporal analysis of TC-induced coastal flooding.

Currently, there exist some DCNN-based models for coastal flooding mapping in SAR images. Most of them are based on supervised DCNN models. The supervised DCNN models need a large volume of ground-truth labels matching the observation data. The ground-truth labels are generated by human experts with the help of multiple data sources and scene information. This process is very time-consuming, costly, and subject to human bias. In addition, the trained supervised model should be fine-tuned for new conditions, if the new conditions are not covered by the data set used in the training. This may affect the generalization abilities of the DCNN model. Therefore, in this study, we propose to explore the DCNN models in another direction, that is, the models without human supervision, for coastal flooding mapping in SAR images.

The proposed design is based on deep convolutional autoencoder (DCAE). The DCAE models can fuse the backscattering, polarimetric, spatial contextual, and temporal information of SAR images together, and mine the most salient features in an unsupervised way from the high-dimensional input image data. In this study, we exploit this ability of the DCAE models, and then perform unsupervised clustering on the DCAE-generated features for coastal flooding mapping. We find the following interesting characteristics of the proposed framework: (1) The framework is robust under local interference, such as speckle noise and temporal mis-registration, since the convolutions in the DCAE can incorporate the spatial contextual information. (2) The framework is robust under meteorological influence, since it deals with the mapping problem case by case. The features for flooding mapping are generated from the data under the same meteorological condition. (3) The framework can not only extract flooded areas, but also classify the scene. Since the flooded areas are linked to the scene, we can get richer information from the flooded areas. For example, the flooded areas can be categorized as flooded areas along water areas, around built-up areas, or over open areas. (4) The framework can not only find surface flooding, but also have the potential to find flooding under vegetation at the same time. Under certain circumstances, the flooding under vegetation can have a distinct pattern in SAR images, since the flooded areas cause the increase of double-bounce scattering. This pattern can be extracted in the proposed framework along with the pattern from surface flooding. Therefore, we find the proposed framework is promising for robust coastal flooding mapping in SAR imagery, and it can get a more comprehensive understanding of the coastal flooding.

We perform some experiments with the Sentinel-1 SAR data during the passages of 2017 Harvey and 2019 Hagibis. The validation data are generated from human labeling with the help of history information and high-resolution optical data, if available. The preliminary results verified the aforementioned characteristics of the proposed framework. The unsupervised framework is suitable for natural disaster impact, such as coastal flooding, information mining.

Liu-A More Comprehensive Understanding of Coastal Flooding-177Poster4_Cn_version.pdf


Poster
ID: 220 / Dr4 YSPS.2.1: 7
Poster for Dragon 4
Oceans & Coastal Zones: 32235 - Microwave Satellite Measurements for Coastal Area and Extreme Weather Monitoring

A Sensitivity Analysis Of Sentinel-1 SAR Spectral Signatures Of Low-Backscattering Sea Areas

Valeria Corcione1, Ferdinando Nunziata1, Andrea Buono1, Marcos Portabella2, Maurizio Migliaccio1

1Università degli Studi di Napoli Parthenope, Italy; 2The Institute of Marine Sciences, Spain

Ocean monitoring is of paramount importance for maritime surveillance, climate change, environmental purposes and for the blue economy. When considering the microwave range of the electromagnetic spectrum, ocean shows specific scattering characteristics. In this domain, the Synthetic Aperture Radar (SAR) is becoming a well-established tool for maritime applications, including wind speed retrieval, target detection and pollution monitoring.

In this study, the spectral signatures of low-backscattering sea areas in Sentinel-1 SAR imagery, namely the autocorrelation function evaluated along the azimuth direction (AACF), are analyzed. Typically, low-backscattering sea areas are associated to oil spills due to the damping effects they have on the wind-driven short sea waves that result, in the gray-tones intensity SAR images, in patches darker than the surrounding sea. This study aims at analyzing the sensitivity of the AACF over different low-backscattering areas. A dataset composed of six Sentinel-1 SAR scenes, collected in Interferometric Wide Swath VV+VH imaging mode under low-to-moderate wind conditions over low-backscattering sea areas of known origin, is considered.

Experimental results show that the AACF is sensitive to low-backscattering sea areas of different nature, i. e., oil spills, algal blooms, etc. The largest departure, with respect to the AACF evaluated over sea surface, is observed over oil slicks. The outcomes of this sensitivity analysis can support the development of improved sea oil spill detection algorithm.

As a final milestone of the ESA-MOST Dragon-4 project, the papers published on peer-reviewed international journals must be mentioned, as follows:

V. Corcione, F. Nunziata, M. Portabella, G. Grieco, X. Yang, and M. Migliaccio, "SAR Azimuth Cut-off to Estimate Wind Speed under High Wind Regimes," Chinese Journal of Geodesy and Geoinformation Science, vol. 4. no.1, pp. 30-37, 2021.

V. Corcione, G. Grieco, M. Portabella, F. Nunziata and M. Migliaccio, “A novel azimuth cut-off implementation to retrieve sea surface wind speed from SAR imagery,” IEEE Transactions on Geoscience and Remote Sensing, vol. 57, no. 6, pp. 3331-3340, 2018.

V. Corcione, G. Grieco, M. Portabella, F. Nunziata and M. Migliaccio, “A novel azimuth cut-off implementation to retrieve sea surface wind speed from SAR imagery,” IEEE Transactions on Geoscience and Remote Sensing, vol. 57, no. 6, pp. 3331-3340, 2018.

G. Benassai, D. Di Luccio, V. Corcione, F. Nunziata and M. Migliaccio, “Marine Spatial Planning using high resolution SAR measurements,” IEEE Journal of Oceanic Engineering, vol. 43, no. 3, pp. 586-594, 2018.

Corcione-A Sensitivity Analysis Of Sentinel-1 SAR Spectral Signatures Of Low-Backscattering Sea Areas-220Poste_Cn_version.pdf
Corcione-A Sensitivity Analysis Of Sentinel-1 SAR Spectral Signatures Of Low-Backscattering Sea Areas-220Poste_ppt_present.pdf


Poster
ID: 271 / Dr4 YSPS.2.1: 8
Poster for Dragon 4
Oceans & Coastal Zones: 32235 - Microwave Satellite Measurements for Coastal Area and Extreme Weather Monitoring

A Tropical Cyclone Tangential Wind Speed Estimation Model Based on C-Band Cross-Polarization SAR Observations

Sheng Wang1,3, Xiaofeng Yang1,3, Marcos Portabella2

1State Key Laboratory of Remote Sensing Science, Aerospace Information Research Institute, Chinese Academy Sciences, Beijing 100101, China; 2Institut de Ciencies del Mar (ICM - CSIC), Barcelona 08003, Spain; 3Key Laboratory of Earth Observation of Hainan Province, Sanya Zhongke Remote Sensing Institute, Sanya 572029, China

Abstract: As the nontrivial instrument to probe at high spatial resolution under extreme wind conditions, C-band synthetic aperture radar (SAR) is able to collect high resolution measurements covering with tropical cyclones (TCs) to support the modeling of TC wind speed. The tangential wind profile model is one of the effective and widely used methods to reconstruct the radial wind speed of TCs. In this research, a tangential wind profile model (TWP) in the form of Gaussian function is proposed based on the retrieval wind speed of cross-polarized SAR data. The proposed model is to solve the common defects existing in the present models, such as the unsmooth transition of the wind speed profile in the high wind speed area (near the eyewall) and the poor performance of wind estimation in the TC eye area. In order to respectively estimate the wind speed inside and outside eyewall, the model function is designed as piecewise one with the maximum tangential wind as the threshold. Then, the model parameters can be determined by fitting the model functions to the azimuthal-mean wind speed derived from SAR observations. For model validation, we choose hurricane Arthur (2014) as a study case and compare the TWP model with the widely used single-modified Rankine vortex (SMRV) model, the results show that as the distance from the TC center increases, the tangential wind speed reconstructed by the TWP model changes relatively smoothly in the high wind speed area (near the eyewall). Besides, compared to linear fitting of SMRV in the aera inside eyewall, nonlinear estimating result of TWP performs better. Moreover, both the results of TWP and SMRV model have been validated with collocated Stepped-Frequency Microwave Radiometer (SFMR) measurement. For TWP model, the root means square error (RMSE), bias, and correlation coefficient are respectively 1.01 m/s, 0.58 m/s, and 0.99, while the same statistics are only 2.22 m/s, 1.50 m/s, and 0.96 for the SMRV model, respectively. Finally, the value distribution ranges of parameters are discussed by utilizing flight-level observations collected from Atlantic and eastern Pacific storms in the period 1977–2001, and the results of discussion can be the references for determining value of parameters in model application.

Keywords: C-band synthetic aperture radar (SAR), tropical cyclone (TC), tangential wind speed, parametric model.

Acknowledgments: This work was supported by the ESA-MOST Dragon 4 cooperation project ID 32235 “Microwave satellite measurements for coastal area and extreme weather monitoring”.

Wang-A Tropical Cyclone Tangential Wind Speed Estimation Model Based-271Poster4_Cn_version.pdf
Wang-A Tropical Cyclone Tangential Wind Speed Estimation Model Based-271Poster4_ppt_present.pdf


Poster
ID: 272 / Dr4 YSPS.2.1: 9
Poster for Dragon 4
Oceans & Coastal Zones: 32235 - Microwave Satellite Measurements for Coastal Area and Extreme Weather Monitoring

Radar Backscattering Simulation of Sea Surface Oil Emulsions

Tingyu Meng1,2, Xiaofeng Yang1,3, Kun-Shan Chen4, Ferdinando Nunziata5, Andrea Buono5

1State Key Laboratory of Remote Sensing Science, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China; 2University of Chinese Academy of Sciences, Beijing, China; 3Key Laboratory of Earth Observation of Hainan Province, Sanya Zhongke Remote Sensing Institute, Sanya, China; 4College of Geomatics and Geoinformation, Guilin University of Technology, Guilin, China; 5Dipartimento di Ingegneria, University of Naples - Parthenope, Napoli, Italy

Emulsion oil slick is one of the most common types of oil spills in the marine environment. Oil slicks can be observed as “dark” patches on SAR images because: a) oil slicks effectively damp capillary and short gravity sea waves responsible for backscattering energy; b) the relative permittivity of the contaminated area decreases significantly due to the smaller oil permittivity. In this paper, to take both effects into consideration, the backscattering from the oil-covered sea surface is predicted using the Advanced Integral Equation Method (AIEM) model which is augmented with: a) the composite reflection coefficient of the two-layer medium that consists of adding an oil layer on top of the sea surface, where the seawater volume fraction in the oil emulsion modifies the dielectric properties; b) the sea spectrum model combined with the hydrodynamic model of local balance (MLB) which is employed to describe the damping of the small-scale roughness by an oil film. An accurate description of geometrical and dielectric properties for oil-covered sea surface is provided according to a layered medium and used to predict the radar backscattering according to oil’s thickness and oil/water mixing for different scenarios.

According to the model's predictions, the sensitivity of oil-covered sea surface backscattering to oil thickness and water content of emulsion increases as the increasing radar frequency with a reduced L-band sensitivity. The backscattering signals exhibit a nonlinear behavior with respect to oil thickness because oil films affect the backscattering in a twofold way: through the damping of the small-scale roughness as well as the composite reflection coefficient resulting from the three-layer medium. The incidence angle has a relatively minor impact on deviating the contaminated sea's backscattering, and the high wind speed can generally narrow the difference between the radar backscattering from the clean and oil-covered sea surface. Numerical simulations are compared with the multi-frequency SAR observations and results show that it is possible to estimate the oil thickness at reasonably good accuracy.

This work was supported by the ESA-MOST Dragon 4 cooperation project ID 32235 “Microwave satellite measurements for coastal area and extreme weather monitoring”.

Meng-Radar Backscattering Simulation of Sea Surface Oil Emulsions-272Poster4_Cn_version.pdf
Meng-Radar Backscattering Simulation of Sea Surface Oil Emulsions-272Poster4_ppt_present.pdf


Poster
ID: 161 / Dr4 YSPS.2.1: 11
Poster for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32070 - Monitoring Water and Energy Cycles at Climate Scale in the Third Pole Environment (CLIMATE-TPE)

Evaluation The Performance Of WRF Using An Improved Albedo Parameterization Scheme During A Heavy Snowfall Event Over The Tibetan Plateau

Lian Liu1, Massimo Menenti2, Yaoming Ma1,3,4, Weiqiang Ma1,3

1Institute of Tibetan Plateau Research, Chinese Academy of Sciences, China, People's Republic of; 2State Key Laboratory of Remote Sensing Science, Institute of Remote Sensing and Digital Earth, Chinese Academy of Sciences, Beijing, 100101, China; 3CAS Center for Excellence in Tibetan Plateau Earth Sciences, Chinese Academy of Sciences, Beijing 100101, China; 4University of Chinese Academy of Sciences, Beijing 100049, China

Snow falls frequently over the Tibetan Plateau, and is a vital component of the widespread cryosphere which has vital feedback to climate change. Snowfall and the subsequent evolution of the snowpack have a large effect on surface energy balance and water cycle. Albedo, the main determinant of net radiation flux, is a major driver of land surface processes. However, the current widely used Noah land surface model does not describe snow albedo correctly, although it keeps snow-related variables into account. In the improved albedo scheme, albedo was parameterized as functions of snow depth and age which was developed using remote sensing retrievals of albedo. Numerical experiments were conducted to model a severe snow event in March 2017. The performance of WRF coupled with Noah applying the improved albedo scheme was compared with that of applying the default albedo scheme and with that of WRF coupled with CLM applying CLM’s complex albedo scheme. First, the improved albedo scheme largely reduces the WRF coupled with Noah albedo overestimation in the southeastern Tibetan Plateau, remarkably reducing the large cold bias estimates by 0.7 ℃ air temperature RMSE. Second, the improved albedo scheme gives the highest correlationship between the satellite-derived and the model estimated albedo, contributing to achieve the SWE spatial pattern, heavy snow belt and maximum SWE estimates in eastern Tibetan Plateau. Remarkable underestimation of albedo in WRF coupled with CLM contributes to regional maximum SWE underestimation and failure in heavy snow belt estimates.

Liu-Evaluation The Performance Of WRF Using An Improved Albedo Parameterization Scheme During A Heavy_Cn_version.pdf
Liu-Evaluation The Performance Of WRF Using An Improved Albedo Parameterization Scheme During A Heavy_ppt_present.pdf


Poster
ID: 113 / Dr4 YSPS.2.1: 12
Poster for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32271 - Air Quality Over China

Characterization And Interpretation Of Air Pollution Sources Based On SO2, NOx Emissions And HCHO Columns Over China Derived From The 2007-2018 OMI Data Set

Marina Zara, Ronald van der A, Jieying Ding

KNMI, Netherlands, The

Over a decade of OMI observations provide insight into the rapidly changing air quality levels in China. Global documentation of key atmospheric pollutant gases such as nitrogen dioxide (NO2), sulfur dioxide (SO2) and formaldehyde (HCHO) allow the study of anthropogenic and natural emissions on different spatial scales.

Based on bottom-up emissions inventories, Chinese SO2 emissions were the world’s largest, particularly over the North China Plain. SO2 sources are related to major coal-fired power plants and industrial activities such as oil and gas refining, and metal smelting. North China Plain is also characterized by a strong seasonal footprint of fire emissions, a significant contributor to poor air quality, due to biomass burning from agricultural activities. The highest NOx emissions are observed over the world’s most populated (increased traffic), highly urbanized and industrialized regions.

Despite the growth of the economy in the rapidly developing China over the past two decades, a substantial overall decrease in the SO2 and NOx emissions has been observed with different patterns between the species. Changes are observed also in the human-induced fire emissions over the North China Plain. We identity the origin of these emissions and we investigate the spatial and temporal variability of the source types. Such variability is strongly related to differences in economic and technological activity, and regional environmental policies.

Government efforts to restrain emissions from power plants and industrial sectors (e.g. installation of de-sulfurization devices) have resulted in decreasing SO2 and NOx emissions since approximately 2007 and 2011, respectively. We use the SO2/NOx ratio to locate and characterize the emissions sources since, to some extent, it reflects the level of the regional modernization and helps us identify the source sector. For instance, the megacity of Shanghai and the areas around it are highly populated with cleaner power plants compared to other regions, therefore a relatively low SO2/NOx ratio is observed. We use OMI HCHO observed columns to infer biogenic emissions and fire emissions as an additional human-induced emission source with high impact on the air quality of China. We compare our satellite-derived findings to the MEIC bottom-up anthropogenic emission inventory combined with biogenic emissions from the REAS inventory.



Poster
ID: 175 / Dr4 YSPS.2.1: 13
Poster for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32271 - Air Quality Over China

Cloud Shadow Method for Retrieving Aerosol Optical Properties over Land

Minzheng Duan1,2,3

1Institute of Atmospheric Physics, China, People's Republic of; 2College of Earth and Planetary Sciences, University of Chinese Academy of Sciences; 3Chengdu University of Information Technology

The radiances measured at top of atmosphere are the light back-scattered from surface and atmosphere, which is of the same order over bright surface such as desert and urban, resulting in the failure of current retrieval algorithm over land. The images from orbit sensor with high spatial resolution provide us very fine quality picture of the cloud and surface, it is very clear to discriminate cloud and its shadows projected on the surface from cloud-free pixels. Over non-transparent cloud’s shadow area, it is assumed that only diffused light are reflected, while over a nearby bright surface, both the solar direct beam and the diffused lights are reflected back to the atmosphere, and then transmitted to the space detector. The contrast of pixels over the shadow and nearby bright surface could be used to derive the aerosol optical properties, this method was first proposed by Duan & Lu in 1999 and simulations are given in 2002. As the release of the high quality data of Landsat 8, this method are revisited, cases studies for different aerosol loading and types, surface albedos show the feasibilities of this algorithm over surface where no dark-pixels exist.



Poster
ID: 150 / Dr4 YSPS.2.1: 14
Poster for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32271 - Air Quality Over China

NOx Emissions From China In July 2019 Using TROPOMI Retrieval And The Influence On Surface NO2 And O3 Simulations

Qianqian Zhang

NSMC, China, People's Republic of

China is suffering from severe air pollution in winter with high load of particulate matters (PM2.5) and in summer with high ozone (O3) concentration. A great part of PM2.5 and O3 are produced in the polluted atmosphere from their precursors, and nitrogen dioxides (NOx) are important precursors of both PM2.5 and O3. The delivery of the Clean Air Action Plan in 2013 has led to substantial reduction of sulfur dioxide (SO2) emission and remarkable decrease of PM2.5 concentrations. NOx emission control is not as effective as that of SO2, and nitrate (produced from NOx) is playing an increasingly important role in PM2.5 during haze. At the same time, surface O3 concentrations over China has increased through the years. This study is aimed at constraining the emission of NOx from China in July 2019, and exploring the influence on surface ozone simulation.



Poster
ID: 111 / Dr4 YSPS.2.1: 15
Poster for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32271 - Air Quality Over China

Volcanic SO2 retrieved from GF-5 Environmental Trace Gas Monitoring Instrument

Huanhuan Yan

NSMC, China, People's Republic of China

Sulfur dioxide (SO2) from volcanic eruption has a significant impact on global climate and aviation. Satellite remote sensing technology provides an unprecedented advantage for continuous, large spatial and short-revisit monitoring for atmospheric SO2. GF-5 Environmental Trace Gas Monitoring Instrument (EMI) with high spatial resolution of 7.5 x 13 km is the China’s first instrument of hyper spectral measurements with wavelength range from 240 nm to 710 nm, and makes daily global observations of key atmospheric constituents, including ozone, nitrogen dioxide, sulfur dioxide. In this study, GF-5/EMI SO2 columns were retrieved by using GF-5 EMI UV-2 band observations and DOAS algorithm, and then the retrieved GF-5/EMI SO2 columns were compared with similar AURA/OMI and S5P/TROPOMI SO2 columns to evaluate the ability of GF-5/EMI on global SO2 monitoring. Results show that, GF-5/EMI can obtain the daily distribution of SO2 from volcanic eruption. The accuracy of GF-5/EMI SO2 columns can meet the needs of application of global volcano monitoring.

Yan-Volcanic SO2 retrieved from GF-5 Environmental Trace Gas Monitoring Instrument-111Poster4_Cn_version.pdf
Yan-Volcanic SO2 retrieved from GF-5 Environmental Trace Gas Monitoring Instrument-111Poster4_ppt_present.pdf


Poster
ID: 310 / Dr4 YSPS.2.1: 16
Poster for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32301 - Monitoring Greenhouse Gases from Space

Evaluation of TanSat Carbon Dioxide total column measurements

Tomi Karppinen1, Ella Kivimäki1, Hannakaisa Lindqvist1, Rigel Kivi1, Hulin Chen2, Johanna Tamminen1

1Finnish Meteorological Institute, Finland; 2University of Groningen, The Netherlands

We have evaluated TanSat carbon dioxide total column measurements against the ground-based measurements from the Total Carbon Column Observing Network (TCCON) instruments. In the evaluation we determined station-specific biases and precisions. Also the trends and seasonal cycle amplitudes were compared to see how well the longer-term changes can be followed by the TanSat measurements.
High latitude measurements were of special interest in our studies. We determined if the measurements were made above a snow-covered surface using NSIDC's IMS Daily Northern Hemisphere Snow and Ice Analysis data. The availability of high latitude measurements over snow and in general were calculated. The retrieval errors for snow and no-snow cases were compared to assess the errors related to snow-covered scenes.
We utilized the AirCore measurements performed at the Arctic Space Centre of Finnish Meteorological Institute to assess the prior profiles used in the TanSat carbon dioxide retrieval. The AirCore profiles can extend up to 30 kilometers altitude with superior vertical resolution in comparison to remote sensing methods.
We found that the TanSat carbon dioxide total columns agree well with the TCCON measurements. The biases were between -2.9 - 1.6 ppm with precision (1-sigma) varying from 0.5 to 2.5 ppm, depending on the station. There were vast amount of TanSat measurements made over snow surfaces but the average retrieval uncertainty over the snow cover was 3.11 ppm when it was only 1.37 ppm over snow-free land. In general, the prior profiles agreed well with AirCore measurements with some deviations in the upper atmosphere during spring.

Karppinen-Evaluation of TanSat Carbon Dioxide total column measurements-310Poster4_ppt_present.pdf


Poster
ID: 233 / Dr4 YSPS.2.1: 17
Poster for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32296 - Lidar Observations from ADM-Aeolus and EarthCARE - Validation, Study of Long-range Transport of Aerosol and Preparation of a Future Chinese CO2 Lidar Mission

Airborne Wind Lidar Observations for the Validation of ESA’s Wind Mission Aeolus

Oliver Lux1, Christian Lemmerz1, Fabian Weiler1, Uwe Marksteiner1, Benjamin Witschas1, Stephan Rahm1, Alexander Geiß2, Andreas Schäfler1, Oliver Reitebuch1

1German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt e.V., DLR), Institute of Atmospheric Physics, 82234 Oberpfaffenhofen, Germany; 2Ludwig-Maximilians-University Munich, Meteorological Institute, 80333 Munich, Germany

Since the successful launch of ESA’s Earth Explorer mission Aeolus in August 2018, atmospheric wind profiles from the ground to the lower stratosphere are being acquired on a global scale, deploying the first-ever satellite-borne wind lidar system ALADIN (Atmospheric LAser Doppler INstrument). ALADIN provides one component of the wind vector along the instrument’s line-of-sight (LOS) with a vertical resolution of 0.25 km to 2 km depending on altitude. The wind accuracy is better than 1 m/s, while the random error ranges from 3 to 6 m/s. The near-real-time wind observations contribute to improving the accuracy of numerical weather prediction and advance the understanding of tropical dynamics and processes relevant to climate variability.

Already several years before the launch of the Earth Explorer mission, an airborne prototype of the Aeolus payload – the ALADIN Airborne Demonstrator (A2D) – was developed at the DLR (German Aerospace Center). Like the direct detection Doppler wind lidar on-board Aeolus, the A2D is composed of a frequency-stabilized ultra-violet laser, a Cassegrain telescope and a dual-channel receiver to measure LOS wind speeds by analyzing both molecular and particulate backscatter signals. Thanks to the complementary design of the A2D receiver, broad vertical and horizontal coverage across the troposphere is achieved. In addition to the A2D, DLR’s research aircraft carries a well-established coherent Doppler wind lidar (2-µm DWL). It is equipped with a double-wedge scanner which allows for the determination of the wind vector with accuracy of better than 0.1 m/s and precision of better than 1 m/s. Hence, both wind lidars represent key instruments for the calibration/validation activities during the Aeolus mission.

After the launch of Aeolus, the A2D and 2-µm DWL were deployed during three airborne validation campaigns between November 2018 and September 2019. 20 coordinated flights along the satellite swath were conducted in Central Europe and the North Atlantic region, yielding a large amount of wind data from the troposphere under various atmospheric conditions in terms of cloud cover and dynamics. The high accuracy of the 2-µm DWL allowed to precisely assess the Aeolus systematic and random errors, and thus enabled a comprehensive evaluation of the satellite’s wind data product quality. Due to the high degree of commonality of the A2D with the satellite instrument, the comparative wind results delivered valuable information on potential error sources as well as on the optimization of the Aeolus wind retrieval and related quality-control algorithms. Beyond the airborne campaigns, the A2D has been serving as testbed to explore new measurement strategies and algorithm modifications which cannot be readily implemented in the Aeolus operation modes and processors, respectively.

The poster presentation will provide an overview of DLR’s airborne validation campaigns and show selected highlights both from an instrument and a meteorological point of view.

Lux-Airborne Wind Lidar Observations for the Validation-233Poster4_Cn_version.pdf


Poster
ID: 309 / Dr4 YSPS.2.1: 18
Poster for Dragon 4
Cryosphere & Hydrology: 32442 - New Earth Observations Tools for Water Resource and Quality Monitoring in Yangtze Wetlands and Lakes (EOWAQYWET)

The development of fine-resolution China Water Cover Map based on time series Sentinel imagery

Zhenguo Niu, Yang Li

Airospace Information Research Institute, Chinese Academy of Sciences, China, People's Republic of

Humans have transformed many open waters into agricultural/urban land or aquaculture to meet the growing demand for food and living space of the growing population in recent decades. These changes have been putting cumulative impacts on territorial hydrological cycle, the environment and ecology. Though the information on the distribution and changes of water cover types is essential to understand those changes, its timely and accurate acquisition and updating is difficult to be accomplished, mainly due to the lack of effective and practical classification method at various scales.

From water cover perspective, we firstly suggest a comprehensive water cover classification system in terms of water sources, water body shapes and water usage, including rivers, reservoirs, lakes, agricultural ponds, seasonal wetlands and rice fields. Based on this classification system, an automatic classification method based on shape features and flooding frequency that can be carried out on a large scale was developed correspondingly. This method is also based on the time series Sentinel-1 and Sentinel-2 images. Using this method, we develop China Water Cover Map (CWCM) with an unprecedented spatial resolution of 10 meters in the year 2020 based on the Google Earth Engine (GEE) . It has an overall accuracy of 0.86 and kappa coefficient of 0.83. The CWCM is the first effort on water cover mapping for whole China at 10-m spatial resolution, which can provide complete information on water cover types. The CWCM indicates that China’s water cover area is estimated to be 334,550 , of which 47.5% is accounted by artificial water covers (rice fields and agricultural ponds). From the perspective of the geographical distribution of water cover, China’s water cover is mainly distributed in Tibet, Heilongjiang, Xinjiang and Qinghai provinces. The shape-based and inundation frequency-based automatic method highlights the potentials of fast water cover type mapping at various scales using the existing water datasets.

Niu-The development of fine-resolution China Water Cover Map based-309Poster4_Cn_version.pdf
Niu-The development of fine-resolution China Water Cover Map based-309Poster4_ppt_present.pdf


Poster
ID: 305 / Dr4 YSPS.2.1: 19
Poster for Dragon 4
Cryosphere & Hydrology: 32439 - Multi-source Hydrological Data Products to Monitor High Asian River Basins and Regional Water Security (MUSYCADHARB)

Albedo of High Mountain Asia: a Complex Driver of Atmospheric and Land Surface Processes

Massimo Menenti1,2, Shaoting Ren1, Jing Zhang1, Junru Jia1, Lian Liu3, Francesca Pellicciotti4, Li Jia1

1State Key Laboratory of Remote Sensing Science, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100101, China; 2Delft University of Technology, 2600 GA Delft, The Netherlands; 3Institute of Tibetan Plateau Research, Chinese Academy of Sciences, Beijing 100101; 4Swiss Federal Institute for Forest, Snow and Landscape Research WSL, 8903 Birmensdorf, Switzerland

General. The albedo of snow and ice is characterized by a large spatial and temporal variability and determines to a large extent the energy and mass balance of the snowpack and glaciers. Spatial variability in snow and ice accumulation and melt leads to mass flow. The dynamic of the atmospheric boundary layer is determined by the energy balance, particularly net radiation, at the land-atmosphere interface. Accurate retrieval of snow and ice albedo using radiometric measurements by space-borne imaging radiometers requires addressing multiple radiative interactions in the land-atmosphere system. Retrieval of atmospheric properties over land requires accurate knowledge of the background reflectance, thus leading to simultaneous retrieval of land surface reflectance and of atmospheric constituents, particularly aerosols. Multiple effects of the complex terrain characteristic of High Mountain Asia need to be taken into account for accurate retrieval of land surface albedo, particularly of the snowpack and glaciers. First, irradiance at a location is largely affected by radiance reflected by the surrounding terrain. Second, the spatial heterogeneity of the latter needs also to be taken into account. Third, the anisotropy of land surface reflectance, particularly of snow and ice has to be characterized and applied both in the estimation of terrain effects and in the retrieval of the target reflectance.

All these aspects are being addressed in an integrated effort to improve the accuracy of albedo retrievals in High Mountain Asia and to understand how and to what extent albedo drives atmospheric boundary layer and land surface processes.

Aerosols + irradiance. Two advanced algorithms to retrieve land surface albedo and aerosol amount and properties were integrated to improve iteratively two strongly related aspects for simultaneous retrievals: a) the characterization of the land surface background to separate the surface and atmospheric signals in aerosol retrievals and b) the accurate separation and estimation of direct and diffuse irradiance in the retrieval of land surface albedo. The correlation of snow and ice albedo with aerosol loading, due to the deposition of fine particles on the surface, was further documented by comparing the evolution of Aerosol Optical Depth (AOD), measured at the ITP Nam Co observatory with glacier albedo in the Western Nyainqentanglha Mountains (WNM) during 2009–2018. It appears that initially AOD was rather low and albedo rather high, both relatively stable. After 2013 a rapid increase in AOD and rapid decrease in albedo was observed.

Terrain contribution to irradiance. Terrain has a two-fold impact on reflectance retrieved from radiometric measurements by a space-borne imaging radiometer: 1) multiple scattering of down-welling radiance on the surrounding terrain modifies the irradiance onto a specific facet; 2) the exposure of the observed facet modifies the inherent anisotropy of the surface. Both effects were evaluated and taken into account in an advanced retrieval algorithm. The evaluation of these radiation-terrain interactions cannot be separated from the accurate description of radiative transfer in the atmosphere. This was documented by analyzing the difference between the reflectance at l = 0.64 mm corrected for terrain effects using either the MODIS data products on atmospheric conditions or the hourly ERA5 and the CALIPSO aerosol extinction coefficients

Anisotropy correction of snow and ice albedo. We calibrated and evaluated four anisotropy correction models for glacier snow and ice, applicable to visible, near-infrared and shortwave-infrared wavelengths using airborne datasets on Bidirectional Reflectance Distribution Function (BRDF). We then tested the ability of the best-performing anisotropy correction model to retrieve albedo from Landsat 5/Thematic Mapper (L5/TM), Landsat 8/Operational Land Imager (L8/OLI) and Moderate Resolution Imaging Spectro-radiometer (MODIS) imagery, and evaluated these results with field measurements collected on eight glaciers around the world.

Parameterization of albedo and PBL processes. We evaluated whether an advanced hydro-meteorological model, i.e. WRF, correctly accounts for the variability in snow and ice albedo and for the response of the latter to atmospheric forcing. In-situ and satellite observations on snow and ice albedo were combined to develop an improved parameterization of ice and snow albedo in relation with snow age and depth. Numerical experiments applying alternate parameterizations and atmospheric forcing were evaluated against in-situ observations of snow water equivalent. The experiments demonstrated the sensitivity of atmospheric processes to ice and snow albedo in the Qinghai-Tibet Plateau and the need to apply realistic parameterizations taking into account ice and snow properties.

Glacier mass balance and flow. The potential of the high spatial resolution ZiYuan-3 (ZY-3) Three-Line-Array (TLA) stereo images to retrieve glacier mass balance has not been sufficiently explored. We optimized the procedure to extract a Digital Elevation Model (DEM) from ZY-3 TLA stereo images and estimated the geodetic mass balance of representative glaciers in two areas of the Nyainqentanglha Mountains (NM) using ZY-3 DEMs and the C-band Shuttle Radar Topography Mission (SRTM) DEM in three periods, i.e., 2000–2013, 2013–2017 and 2000–2017.

We investigated the glacier surface velocity in the Parlung Zangbo Basin (PZB) by applying the normalized image cross-correlation method to Sentinel 2 (S2) MSI and Landsat-8 (L8) OLI image data acquired from 2013 to 2020. We mapped time-averaged glacier surface velocity and examined four typical glaciers (Yanong, Parlung No.4, Xueyougu and Azha) in the PZB. We explored the driving factors of surface velocity and of its spatial and temporal variability.

Menenti-Albedo of High Mountain Asia-305Poster4_Cn_version.pdf


Poster
ID: 192 / Dr4 YSPS.2.1: 20
Poster for Dragon 4
Cryosphere & Hydrology: 32439 - Multi-source Hydrological Data Products to Monitor High Asian River Basins and Regional Water Security (MUSYCADHARB)

Improving Glacier Energy Balance Model Using Sentinel-2 / MSI Data: A Case Study in Parlung No.4 Glacier In The Southeast Tibetan Plateau

Shaoting Ren1,2,3, Achille Pierre Jouberton3, Massimo Menenti1,4, Li Jia1, Michael McCarthy3, Pascal Buri3, Evan Stewart Miles3, Stefan Fugger3, Francesca Pellicciotti3

1Aerospace Information Research Institute, Chinese Academy of Sciences, China, People's Republic of; 2University of Chinese Academy of Sciences, Beijing 100049, China; 3Swiss Federal Research Institute WSL, 8906, Birmensdorf, Switzerland; 4Faculty of Civil Engineering and Earth Sciences, Delft University of Technology, 2628 Delft, The Netherlands

Net shortwave radiation is an important forcing of glacier energy balance, contributes more than half of the net radiation and is directly determined by glacier surface albedo. Models of So far, in the glacier-energy balance usually estimate albedo by mapping the snow and free ice components. Snow albedo is estimated by parameterizing snow decay with age, while ice albedo is usually set constant when the snow has melt. This albedo parameterization is likely to be inaccurate, especially where a mixture of snow, ice and debris occurs. Previous studies have shown that glacier surface albedo can be accurately retrieved from remote sensing data, especially the Sentinel-2/MultiSpectral Instrument (S2/MSI) radiometric data of high spatial resolution (10 or 20 m) and high radiometric performance. In this study, we used albedo retrieved from S2 / MSI data to evaluate albedo estimates by a glacier energy balance model and then to improve the albedo parameterization and the model performance. A distributed model named Tethys-Chloris (T&C) was applied to test this approach in the Parlung No.4 glacier in the southeast Tibet Plateau. The results show that T&C performs better when ingesting S2 / MSI albedo retrievals, especially in the spatial patterns of glacier albedo, energy and mass balance.

Ren-Improving Glacier Energy Balance Model Using Sentinel-2 MSI Data-192Poster4_Cn_version.pdf
Ren-Improving Glacier Energy Balance Model Using Sentinel-2 MSI Data-192Poster4_ppt_present.pdf


Poster
ID: 251 / Dr4 YSPS.2.1: 21
Poster for Dragon 4
Cryosphere & Hydrology: 32439 - Multi-source Hydrological Data Products to Monitor High Asian River Basins and Regional Water Security (MUSYCADHARB)

Precipitation Phase Change Accelerates Glacier Mass Loss In The Southeastern Tibetan Plateau

Achille Pierre Jouberton1, Thomas Edward Francis Shaw1, Evan Miles1, Shaoting Ren1,2, Wei Yang3,4, Michael McCarthy1,5, Stefan Fugger1,6, Amaury Dehecq7, Francesca Pellicciotti1,8

1Swiss Federal Institute for Forest, Snow and Landscape Research (WSL), France; 2State Key Laboratory of Remote Sensing Science, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100101, China; 3Institute of Tibetan Plateau Research, Chinese Academy of Sciences, Beijing, China; 4Ministry of Education Key Laboratory for Earth System Modeling, Department of Earth System Science, Tsinghua University, Beijing, China; 5British Antarctic Survey,Natural Environment Research Council,Cambridge,UK; 6Institute of Environmental Engineering, ETH Zurich, 8093 Zurich, Switzerland; 7Laboratory of Hydraulics, Hydrology and Glaciology (VAW), ETH Zurich, 8093, Zurich, Switzerland; 8Department of Geography, Northumbria University, Newcastle, UK

Glaciers are key components of the mountain water towers of Asia and are vital for downstream domestic, agricultural and industrial uses. The highest rate of glacier mass loss in this region occurs in the Southeastern Tibetan Plateau, where it has accelerated in the past four decades. This has been attributed to a warming climate, but the influence of decadal changes in precipitation and its interplay with recent warming remains unclear. Furthermore, Tibetan glaciers’ changing role in catchment hydrology remains largely unknown. Here, we reconstruct catchment runoff and glacier mass changes since 1975 at Parlung No. 4 glacier, using a fully distributed glacio-hydrological model (TOKPAPI-ETH), to shed light on the drivers of mass losses for the monsoonal, spring-accumulation glaciers of this region. Parlung No.4 Glacier is considered as a benchmark glacier in this region, since its meteorology, surface energy fluxes and mass-balance have been examined since 2006. It is a maritime glacier with a spring (April-May) accumulation regime , which is followed by a period of simultaneous accumulation and ablation during the Indian Summer Monsoon (typically June-September). We force the model with climate reanalysis (ERA5-Land, CMFD) and Zayu’s national meteorological station data bias-corrected to a local weather station. TOPKAPI-ETH is calibrated and validated with automatic weather station data, discharge measurements, geodetic mass balance, stake measurements and snow cover data from MODIS. Our modelling shows that increases in annual mean temperatures (0.23°C dec-1) in the region have simultaneously increased melt and decreased accumulation. An increase of total annual precipitation in the late 1990s initially counteracted the detrimental effect of this warming, though was eventually overcome and dominated by the changing phase of monsoon precipitation, reducing monsoon accumulation, decreasing surface albedo and further intensifying ice-melt and catchment runoff since the start of the 21st Century. Our findings also highlight an augmented spring precipitation during the last two decades which was increasingly important in buffering glacier mass loss by simultaneously providing mass to the glacier and protecting it from melting in the early monsoon period. While spring accumulation was relatively insensitive to recent warming during our study period, its potential to halt more rapid mass losses depends on the complex interplay of climate warming and monsoon dynamics in the near future.

Jouberton-Precipitation Phase Change Accelerates Glacier Mass Loss-251Poster4_Cn_version.pdf
Jouberton-Precipitation Phase Change Accelerates Glacier Mass Loss-251Poster4_ppt_present.pdf


Poster
ID: 296 / Dr4 YSPS.2.1: 22
Poster for Dragon 4
Cryosphere & Hydrology: 32439 - Multi-source Hydrological Data Products to Monitor High Asian River Basins and Regional Water Security (MUSYCADHARB)

Spatial-temporal Variability of Glacier Surface Velocity in the Parlung Zangbo Basin, Tibetan Plateau.

Jing Zhang1,2, Li Jia1, Massimo Menenti1,3, Shaoting Ren1,2

1State Key Laboratory of Remote Sensing Science, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100101, China; 2University of Chinese Academy of Sciences, Beijing 100049, China;; 3Faculty of Civil Engineering and Earth Sciences, Delft University of Technology, 2628 CN Delft, The Netherlands

Monitoring glacier surface velocity is important to understand the response of mountain glaciers to environmental forcing under climate change. The variability of surface velocity in the temperate glaciers of the Parlung Zangbo Basin (PZB) has attracted wide attention. This study investigated in detail the spatial pattern and the temporal variability of surface velocity of glaciers in the PZB. Thanks to the Sentinel-2 MSI instrument, observations of the same region every 5 to10 days are feasible. In this study, we monitored the glacier surface velocity by using the normalized cross-correlation method. We used the Sentinel-2A/B data form October 2016 to December 2019 and Landsat-8 data from June, 2013 to June 2020 to generate velocity maps. Based on the satellite images acquired from 2013 to 2020, we present a map of the annual and of time-averaged glacier surface velocity and examined four typical glaciers (Yanong, Parlung No.4, Xueyougu, and Azha) in the PZB. The results show that the glacier centerline velocity increased slightly from 2017 to 2020. Results of the L8 / OLI and S2 / MSI datasets were compared to evaluate their accuracy, and assess the reliability of cross correlation for ice flow monitoring. The analysis of meteorological data at two weather stations on the outskirts of the glacier area provided some indications of increased precipitation during winter-spring. Besides, there was a clear winter-spring glacier velocity speedup of 40% in the upper glacier region, while a summer speedup occurred at the glacier tongue. The seasonal and interannual variability of surface velocity was captured by the transverse velocity profiles in the four selected glaciers. The observed spatial pattern and seasonal variability in glacier surface velocity suggests that the winter-spring snow might be a driver of glacier flow in the central and upper portions of glaciers. The findings on glacier velocity suggest that the transfer of winter-spring accumulated ice triggered by mass conservation seems to be the main driver of changes in glacier velocity. The interannual and seasonal glacier velocity result would contribute to modelling glacier dynamics in the future.

Zhang-Spatial-temporal Variability of Glacier Surface Velocity-296Poster4_Cn_version.pdf
Zhang-Spatial-temporal Variability of Glacier Surface Velocity-296Poster4_ppt_present.pdf


Poster
ID: 191 / Dr4 YSPS.2.1: 23
Poster for Dragon 4
Cryosphere & Hydrology: 32439 - Multi-source Hydrological Data Products to Monitor High Asian River Basins and Regional Water Security (MUSYCADHARB)

Supra-Glacial Ice Cliff Distribution in High Mountain Asia

Marin Kneib1,2, Evan Miles1, Pascal Buri1, Thomas Shaw3, Francesca Pellicciotti1,4

1Swiss Federal Institute for Forest, Snow and Landscape Research (WSL), Birmensdorf, Switzerland; 2Institute of Environmental Engineering, ETH Zurich, Zurich, Switzerland; 3Advanced Mining Technology Center, Universidad de Chile, Santiago, Chile; 4Department of Geography and Environmental Sciences, Northumbria University, UK

Ice cliffs play a key role in the mass balance of debris-covered glaciers, dramatically enhancing melt, but their importance has only been assessed for select glaciers due to a lack of datasets on their distribution and evolution. This is partly attributable to the lack of robust automatic methods that can replace the subjective and time-consuming manual delineation approaches used to date. Existing methods have used digital elevation models or multispectral images, but the varying slope and mixed spectral signal of these dynamic features makes the transferability of these approaches particularly challenging. We developed two automated and objective new approaches, based on the Spectral Curvature (SC) and Linear Spectral Unmixing (LSU) of multispectral images, to map these features at glacier to regional scales. These methods are i) robust and transferable to sites with varying lithologic, glaciological and climatic settings, and encompassing different periods of the melt season; and ii) applicable to atmospherically corrected Pléiades (2 m resolution) and Sentinel-2 (10 m resolution) images. We find that the SC method works best for the high spatial resolution, four band Pléaides images, while a modification of the LSU using the scaling factor of the unmixing method is best for the Sentinel-2 products with their coarser spatial resolution but greater number of bands. Comparison of the results with other existing methods shows that our approaches are more accurate and robust than any other existing automated or semi-automated approaches. We then use the LSU-based method to measure the distribution of ice cliffs across selected areas of High Mountain Asia and assess the main drivers of ice cliff density using a statistical analysis. This approach also outlines a high number of small, sometimes shallow-sloping and thinly debris-covered ice patches that differ from our traditional understanding of ice cliffs as isolated, prominent features, and which may have a non-negligible impact on the mass balance of debris-covered glaciers. Overall, our results give insights into the regional distribution of ice cliffs across High Mountain Asia, provide a database for the assessment of their role on the mass balance of glaciers regionally, and pave the way for representation of these features in debris-covered glacier melt models.

Kneib-Supra-Glacial Ice Cliff Distribution in High Mountain Asia-191Poster4_Cn_version.pdf
Kneib-Supra-Glacial Ice Cliff Distribution in High Mountain Asia-191Poster4_ppt_present.pdf
 
Date: Tuesday, 20/July/2021
8:30am - 10:30amDr4 S.1.2: SOLID EARTH & DISASTER REDUCTION
Workshop: Dragon 4
Session Chair: Cécile Lasserre
Session Chair: Dr. Qiming Zeng

ID. 38577 Earthquake Precursors
ID. 32244 EO4 Geohazards 
ID. 32278 3 & 4D Topo. Measurement 
ID. 32294 Hazards in Coastal Deltas 
ID. 32365 EO4 Landslides 
ID. 32431 Seismic Monitoring by InSAR

Dragon 4 
 
8:30am - 8:50am
Accepted
ID: 301 / Dr4 S.1.2: 1
Oral Presentation for Dragon 4
Solid Earth & Disaster Risk Reduction: 38577 - Earthquake Precursors from Space and Ground Detecting Seismic Anomalies from Satellite and Ground Data with Multiple Parameters

Detecting Seismic Anomalies from Satellite and Ground-based Network Data with Multiple Parameters

Yaxin Bi1, Guoze Zhao2, Vyron Christodoulou1, Minjun Huang1, Shane Harrigan1, Bing Han2, Ji Tang2

1Ulster University, United Kingdom; 2Institute of Geology, China Earthquake Administration

The Swarm satellite mission were launched on 22 November 2013, it is the first European Space Agency’s constellation of three satellites, dedicated to monitoring geomagnetic field changes. The three satellites have delivered more than 7 year measurements to date, which provide an unprecedented opportunity for conducting a broad range of applications at global scale, including earthquake prediction study. However, for the past years, relatively little advancement has been achieved on establishing a systematic approach for detecting anomalies from the satellite data and integration with ground-based measurements for predicting earthquakes. In Dragon 3 we developed the Wavelet Maxima-based method, Geometric Moving Average Martingale (GMAM) based on the Martingale theory, the integration of Cumulative Sum (CUSUM) and Exponentially Weighted Moving Average (EWMA) called CUSUM-EWMA, and applied these methods to analyse the Wenchuan and Lushan earthquakes.

This report will present the further development and comparative analysis results achieved in the Dragon 4 project. These include the development of a Fuzzy Inspired Approach to Seismic Anomaly Detection (FIAD), Anomaly Detection in Sequential Data Augmented with new features and Enhanced Martingale methods as well as analysis results of the Peru earthquake, Jinggu, Taoyuan, Ludian and Peloponnese earthquakes occurred in China and Greece, respectively. These results demonstrated possible automatic approaches for detecting anomalies from the satellite data and the effectiveness of these methods. The studies conducted have laid down a good basis for the project team to carry out large and more comprehensive studies of analyzing the data observed by China Seismo-Electromagnetic Satellite Mission (CSES) satellite and ground-based networks in order to improve understanding of earthquake preparation and occurrence processes.



8:50am - 9:10am
Accepted
ID: 325 / Dr4 S.1.2: 2
Oral Presentation for Dragon 4
Solid Earth & Disaster Risk Reduction: 32244 - Earth Observations for Geohazard Monitoring and Risk Assessment

Landslide Geometry and Activity in Villa de la Independencia (Bolivia) Revealed by InSAR and Seismic Noise Measurements

Chuang Song1, Chen Yu1, Zhenhong Li1,2, Veronica Pazzi3, Matteo Del Soldato3, Abel Cruz4, Stefano Utili1

1Newcastle University, United Kingdom; 2Chang'an University, China; 3University of Firenze, Italy; 4Universidad Mayor de San Simon, Bolivia

Interferometric Synthetic Aperture Radar (InSAR) enables detailed investigation of surface landslide movements, but cannot provide information about subsurface structures. In this work InSAR measurements were integrated with seismic noise in-situ measurements to analyse both the surface and subsurface characteristics of a complex slow-moving landslide exhibiting multiple failure surfaces. The landslide body involves a town of around 6,000 inhabitants, Villa de la Independencia (Bolivia), where extensive damages to buildings have been observed. To investigate the spatial-temporal characteristics of the landslide motion, Sentinel-1 displacement time series from October 2014 to December 2019 were produced. A new geometric inversion method is proposed to determine the best-fit sliding direction and inclination of the landslide. Our results indicate that the landslide is featured by a compound movement, where three sub-blocks slide with diverse geometries and magnitudes. This is further evidenced by seismic noise measurements which identified that the different dynamic characteristics of the three sub-blocks were possibly due to the different properties of shallow and deep slip surfaces. Determination of the slip surface depths allows estimating the overall landslide volume (9.18·107 m3). Furthermore, Sentinel-1 time series show that the landslide movements manifest substantial accelerations in early 2018 and 2019, coinciding with increased precipitations in the late rainy season which are identified as the most likely triggers of the observed accelerations. This study reveals the potential of integrating InSAR and seismic noise techniques to understand the landslide mechanism from ground to subsurface.

Reference:

Song, C., Yu, C., Li, Z., Pazzi, V., Del Soldato, M., Cruz, A. and Utili, S. (2021), Landslide geometry and activity in Villa de la Independencia (Bolivia) revealed by InSAR and seismic noise measurements, Landslides, https://doi.org/10.1007/s10346-021-01659-9.

Song-Landslide Geometry and Activity in Villa de la Independencia-325Oral4.pdf


9:10am - 9:30am
Accepted
ID: 264 / Dr4 S.1.2: 3
Oral Presentation for Dragon 4
Solid Earth & Disaster Risk Reduction: 32278 - Three- and Four-Dimensional Topographic Measurement and Validation

Three- and Four-Dimensional Topographic Measurement and Validation

Fabio Rocca1, Li Deren2, Stefano Tebaldini1, Mingsheng Liao2, Timo Balz2, Fabrizio Lombardini3, Xiaoli Ding4, Norbert Haala5, Ramon Hanssen6

1Politecnico di Milano, Italy; 2State Key Lab. of Information Eng. in Surveying, Mapping and Remote Sensing (LIESMARS) Wuhan University; 3Università di Pisa; 4Hong Kong Polytechnic University; 5Universität Stuttgart; 6TU Delft

The present project Three- and Four-Dimensional Topographic Measurement and Validation (ID: 32278) has been developed with continuity since Dragon-1. In Dragon­1 and Dragon­2, the focus was on DEM generation and surface motion estimation with medium resolution Synthetic Aperture Radar (SAR) data. Since Dragon­3, SAR datasets of high spatial and temporal resolution (TerraSAR­X, COSMO­SkyMed) were made available, and nowadays, thanks to the availability of dense time series from Sentinel­1, accurate and frequent global coverage has become reality. Moreover, the capabilities of SAR-based Earth Observation are on their way for a further improvement in the very near future, thanks to new low-frequency Missions such as BIOMASS and ROSE-L that will grant enhanced wave penetration in natural media such as forests and ice. This is the context in which this Dragon-4 project is framed. The overarching goal of the project is to develop new methodologies to deliver a most complete characterization of targets on land surfaces and deepen the current knowledge on the exploitation of SAR data. The project is split into three subprojects focused on specific tasks, namely:

  • Validation of elevation and deformation maps produced by SAR Interferometry.
  • Handling temporal effects on interferometric and tomographic analyses of natural scenarios.
  • Near-real time target motion estimation, considering efficient algorithms to allow for the digestion of new acquisitions and for a change in the parameterization of the estimation problem.
Rocca-Three- and Four-Dimensional Topographic Measurement and Validation-264Oral4.pdf


9:30am - 9:50am
Accepted
ID: 312 / Dr4 S.1.2: 4
Oral Presentation for Dragon 4
Solid Earth & Disaster Risk Reduction: 32294 - Integrated Analysis of the Combined Risk of Ground Subsidence Sea Level Rise, and Natural Hazards in Coastal Delta Regions

Integrated Analysis of the Combined Risk of Ground Subsidence, Sea Level Rise, and Natural Hazards in Coastal and Delta River Regions: Outcome Results and Project Exploitation

Qing Zhao1, Jiayi Pan2, Adam Devlin2, Qing Xu3, Maochuan Tang1, Zhengjie Li1, Virginia Zamparelli4, Francesco Falabella5, Pietro Mastro5, Antonio Pepe4

1East China Normal University; 2Jiangxi Normal University; 3College of Oceanography, Hohai University, Nanjing 210098, China; 4National Council Research of Italy, CNR-IREA, Napoli, Italy; 5University of Basilicata, School of Engineering, Potenza, Italy

Non-climate-related anthropogenic processes and frequently encountered natural hazards exacerbate the risk in coastal zones and megacities and amplify local vulnerability. Coastal risk is amplified by the combination of sea level rise (SLR) resulting from climate change, associated tidal evolution, and the local sinking of land resulting from anthropogenic and natural hazards. In this framework, the authors of this investigation have actively contributed to the joint European Space Agency (ESA) and the Chinese Ministry of Science and Technology (MOST) Dragon IV initiative through a project (ID. 32294) that was explicitly designed to address the issue of monitoring coastal and delta river regions through Earth Observation (EO) technologies. The project's primary goals were to provide a complete characterization of the changes in target scenes over time and provide estimates of future regional sea level changes to derive submerged coastal areas and wave fields. It also provided suggestions for implementing coastal protection measures to adapt and mitigate the multifactor coastal vulnerability. To achieve these tasks, well-established remote sensing technologies, based on the joint exploitation of multi-spectral information gathered at different spectral wavelengths, the exploitation of advanced Differential Interferometric Synthetic Aperture Radar (DInSAR) techniques for the retrieval of ground deformations, the realization of geophysical analyses, and the use of satellite altimeters and tide gauge data, have effectively been employed. The achieved results provide essential assets for planning present and future scientific activities devoted to monitoring such fragile environments. These analyses are crucial to assess the factors that will amplify the vulnerability of low-elevation coastal zones.

Zhao-Integrated Analysis of the Combined Risk of Ground Subsidence, Sea Level Rise, and Natural Hazards-312Ora.pdf


9:50am - 10:10am
Accepted
ID: 285 / Dr4 S.1.2: 5
Oral Presentation for Dragon 4
Solid Earth & Disaster Risk Reduction: 32365 - Landslide Identification, Movement Monitoring And Risk Assessment Using Advanced Earth Observation Techniques

Landslide Identification, Movement Monitoring and Risk Assessment using Advanced Earth Observation Techniques

Joaquim J. Sousa1,2, Guang Liu3, Jinghui Fan4, Zbigniew Perski5, Stefan Steger6, Shibiao Bai7, Lianhuan Wei8, Stefano Salvi9, Qun Wang10, Jienan Tu4, Liqiang Tong4, Peter Mayrhofer6, Ruth Sonnenschein6, Shanjun Liu8, Yachun Mao8, Cristiano Tolomei9, Christian Bignami9, Simone Atzori9, Giuseppe Pezzo9, Lixin Wu11, Shiyong Yan12

1Engineering Department, School of Science and Technology, University of Trás-os-Montes e Alto Douro, Portugal; 2Centre for Robotics in Industry and Intelligent Systems (CRIIS), INESC Technology and Science, Porto, Portugal; 3Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China; 4China Aero Geophysical Survey and Remote Sensing Center for Natural Resources; 5Carpathian Branch, Polish Geological Institute – National Research Institute, Cracow 31-560, Poland; 6Institute for Earth Observation, Eurac Research, 39100 Bolzano, Italy; 7College of Marine Science and Engineering, Nanjing Normal University, Nanjing, Jiangsu, China; 8Northeastern University, Wenhua Road 3-11, Shenyang 110819, China; 9Istituto Nazionale di Geofisica e Vulcanologia, National Earthquake Observatory, via di Vigna Murata 605, 00143 Rome, Italy; 10China Highway Engineering Consultants Corporation, Beijing, China; 11School of Geosciences and Info-Physics, Central South University, Changsha 410083, China; 12MNR Key Laboratory of Land Environment and Disaster Monitoring, China University of Mining and Technology, Xuzhou, Jiangsu, China

Geological disasters, or geohazards, can occur in remote and highly populated areas, causing several fatalities and high economic damage every year. Due to their wide spatial and temporal coverage, remote sensing data, acquired from most recent satellite missions, is the perfect tool for detailed reconstruction of past events and to monitor currently occurring phenomena. This Dragon-4 project aims to apply different techniques and methods for extensive exploitation and analysing of remote sensing data with special emphasis given to landslide hazard, risk management and disaster prevention. Multi temporal SAR interferometry, SAR tomography, high-resolution image matching and data modelling are extensively used to map landslides and other geohazards, and to evaluate their activity. In this project, various areas and various geohazard problems are explored, in the Chinese territory, including: (1) surface deformation of mountain slopes and glaciers in the Tibetan plateau; (2) land surface displacement in the Beijing region; (3) geohazards in the Longnan area; and (4) subsidence, landslides and ground fissure in the Benxi-Anshan/Shenyang-Fushun (BASF) region. Each of these themes is explored in four different sub-projects in which Chinese and European researchers collaboratively contribute. The results obtained from the processing and analysis of a huge dataset of earth observation (EO) multi-source data allow to conclude that geohazards can be identified, studied and monitored in an effective way using new techniques applied to EO data.

Sousa-Landslide Identification, Movement Monitoring and Risk Assessment using Advanced Earth Observation.pdf


10:10am - 10:30am
Accepted
ID: 265 / Dr4 S.1.2: 6
Oral Presentation for Dragon 4
Solid Earth & Disaster Risk Reduction: 32431 - Seismic Activity Monitoring and Lithosphere Deformation Detection by Radar Interferometry in China and Surrounding Regions

From the Envisat Era to that of Sentinel-1 in the Analysis of Surface Deformation from InSAR : Case Studies Related to Tectonics, Hydrological and Geomorphological Processes and Human Activities on the Tibetan Plateau in China

Cécile Lasserre1, Jianbao Sun2, Marie-Pierre Doin3, Zhengkang Shen4, Laetitia Lemrabet1, Simon Daout3, Tao Li2

1LGLTPE, Université Lyon 1, CNRS, France; 2Institute of Geology, China Earthquake Administration, Beijing, China; 3ISTerre, Université Grenoble Alpes, CNRS, France; 4Earth, Planetary, and Space Sciences, University of California, Los Angeles, California, USA

Improvement of InSAR time series analysis over the past years, combined with increased temporal resolution and spatial coverage of InSAR data, made it possible to explore in more detail and with more accuracy various surface deformation processes (tectonic, hydrological, related to human activities...). A major challenge associated with this is to better separate the different signal sources in InSAR velocity maps. We report here the main results obtained during our Dragon 4 project dedicated to the monitoring of seismic activity and the detection of lithospheric deformation by InSAR in China.

Starting from the analysis of the Envisat archive and moving toward exploiting the high-temporal resolution and wide coverage of Sentinel-1 data, we mainly focus on the recovery of small deformation signals associated with strain accumulation during the interseismic period along the main active fault systems on the northwestern and eastern edges of the Tibetan plateau (Altyn Tagh, Kunlun and Xianshuihe faults in particular). We present new methodological approaches to discriminate between such tectonic signals and non tectonic processes such as permafrost active layer’s response to climate forcing in sedimentary basins and other seasonal hydrological and atmospheric processes. We also show the potential of Sentinel-1 to capture such processes at the continental scale, presenting examples of average velocity maps obtained in eastern tibet by the FLATSIM automated processing chain. FLATSIM (ForM@Ter LArge-scale multi-Temporal Sentinel-1 InterferoMetry) is a service developed by CNES in the framework of the french Data and Services center ForM@Ter. The large scale products it provides enable refined 3D block modeling of joint GPS and InSAR data to discuss the present-day strain partitioning in eastern tibet. Finally, we present a case of investigation of potentially induced seismicity in the Sichuan basin : the occurrence of the 2019 Mw5.8 Changning earthquake in China.

 
8:30am - 10:30amDr4 S.2.2: OCEANS & COASTAL ZONES
Workshop: Dragon 4
Session Chair: Prof. Ferdinando Nunziata
Session Chair: Prof. Junmin Meng

OCEAN RETRIEVALS & MONITORING
ID. 32292 RS Data for Operational Application
ID. 32249 Synergistic Monitoring
ID. 32281 Ocean and Coast Sustainability

COASTAL ZONES
ID. 32405 Monitoring Coastal Wetlands
ID. 32235 Extreme Weather Monitoring
ID. 31451 Oceanic and Atmos. Processes

Dragon 4 
 
8:30am - 8:50am
Accepted
ID: 262 / Dr4 S.2.2: 1
Oral Presentation for Dragon 4
Oceans & Coastal Zones: 32292 - The Research of New Ocean Remote Sensing Data for Operational Application

Using New Ocean Remote Sensing Data for Operational Applications: Results from the Dragon 4 Cooperation Project

Ferran Gibert1, Junmin Meng2

1isardSAT SL, Barcelona, Catalonia. Spain; 2The First Institute of Oceanography, SOA, China

The Dragon 4 project 32292 dealt with using new Earth Observation data for developing and improving new products obtained from radar altimetry and for operational monitoring of sea ice and surface salinity (SSS). To improve sea ice thickness retrieval, a new method was developed to match the Cryosat-2 radar waveform. Also, an automated sea ice drift detection scheme was developed and tested on Sentinel-1 data, and the sea ice drifty capability of Gaofen-4 geostationary optical data was evaluated. A second topic included implementation and validation of a prototype of a Fully-Focussed SAR processor adapted for Sentinel-3 and Sentinel-6 altimeters and evaluation of its performance with Sentinel-3 data over the Yellow Sea; the assessment of sea surface height (SSH), significant wave height (SWH), and wind speed measurements using different altimeters and CFOSAT SWIM; and the fusion of SSH measurements in mapping sea level anomaly (SLA) data to detect mesoscale eddies. Thirdly, the investigations on the retrieval of SSS include simulations to analyse the performances of the Chinese payload configurations of the Interferometric Microwave Radiometer and the Microwave Imager Combined Active and Passive, SSS retrieval under rain conditions, and the combination of active and passive microwave to study extreme winds.



8:50am - 9:10am
Accepted
ID: 227 / Dr4 S.2.2: 2
Oral Presentation for Dragon 4
Oceans & Coastal Zones: 32249 - Synergistic Monitoring of Ocean Winds, Waves and Storm Surges from Multi-sensors

Synergistic Monitoring of Ocean Winds, Waves and Storm Surges from Multi-Sensors

Jingsong Yang1, Lin Ren1, He Wang2, Alexis Mouche3, Xiaohui Li1, Jianguo Liu4, Biao Zhang5, Gang Zheng1, Guoqi Han6, Bertrand Chapron3

1State Key Laboratory of Satellite Ocean Environment Dynamics, Second Institute of Oceanography, MNR, China; 2National Ocean Technology Center, MNR, China; 3Institut Français de Recherche pour l’Exploitation de la Mer, France; 4Imperial College London, UK; 5Nanjing University of Information Science & Technology, China; 6Fisheries and Oceans Canada, Canada

It is presented in this paper the final results of ESA-MOST China Dragon Cooperation Program “Synergistic Monitoring of Ocean Winds, Waves and Storm Surges from Multi-Sensors (ID. 32249)” including: (1) GF-3 SAR ocean wind retrieval: the first view and preliminary assessment; (2) Preliminary analysis of Chinese GF-3 SAR quad-polarization measurements to extract winds in each polarization; (3) Assessments of ocean wind retrieval schemes and geophysical model functions used for Chinese GF-3 SAR data at each polarization; (4) Combined co- and cross-polarized SAR measurements under extreme wind conditions; (5) Joint retrieval of directional ocean wave spectra from SAR and RAR; (6) Wind and waves remote sensing by using interferometric imaging radar altimeter onboard the Chinese Tiangong-2 Space Laboratory (TG-2); (7) Top cloud motion field of Typhoon Megi–2016 revealed by GF-4 Images; (8) Using satellite altimetry to calibrate the simulation of typhoon Seth storm surge off southeast china.

Yang-Synergistic Monitoring of Ocean Winds, Waves and Storm Surges-227Oral4.pdf


9:10am - 9:30am
Accepted
ID: 333 / Dr4 S.2.2: 3
Oral Presentation for Dragon 4
Oceans & Coastal Zones: 32281 - Monitoring from Space for Ocean and Coast Sustainability

Spaceborne SAR for Ocean Wave Measurements in Global and Regional Scales

Xiaoming Li1, Sven Jacobsen2

1Aerospace Information Research Institution, Chinese Academy of Sciences, China, People's Republic of; 2Maritime Safety and Security Lab Bremen, German Aerospace Center (DLR), Germany

In this paper, we presented our collaboration on studies retrieval of ocean wave parameters, i.e., integral wave parameters by spaceborne SAR data, in the global and regional oceans.

By using the ENVISAT/ASAR wave mode data acquired in its full life cycle (2002 – 2012) over the global ocean, we developed a dataset consisting of integral ocean wave parameters of significant wave height (SWH) and mean wave period (MWP). Both parameters are calibrated and validated against buoy data. A cross-validation between the ASAR SWH and radar altimeter (RA) data is also performed to ensure that the SAR-derived wave height data are of the same quality as the RA data. These data are stored in the standard NetCDF format, which are produced for each ASAR wave mode Level1B data provided by the European Space Agency. This is for the first time that a full sea state product is derived from spaceborne SAR data over the global ocean for a decadal temporal scale. Using similar algorithm, i.e., parametric model, which relates SAR observed normalized radar cross section (NRCS) and other radar parameters with ocean wave parameters, we further developed Sentinel-1 SAR wave mode data product for global oceans.

In regional scale, SAR data acquired in stripmap or ScanSAR modes are used to derive ocean wave parameters. These data have not only high spatial resolution but also relatively large spatial coverages, and therefore are useful for mapping of ocean wave in regional scales. Compared with wave mode data with fixed radar incidence angles, they vary significantly from near to far ranges, particularly for ScanSAR and wide ScanSAR modes. Therefore, by adopting previously developed parametric model, effect of incidence angles is included. The SAR-derived SWH is systematically validated by comparing RA data and buoy measurements and shows a good accuracy.

Li-Spaceborne SAR for Ocean Wave Measurements in Global and Regional Scales-333Oral4.pdf


9:30am - 9:50am
Accepted
ID: 298 / Dr4 S.2.2: 4
Oral Presentation for Dragon 4
Oceans & Coastal Zones: 32405 - Monitoring Dynamics Of Coastal Wetlands And Suspended Sediment With High (Temporal/Spatial/Spectral) Resolution Satellite Images

Monitoring Dynamics of Suspended Sediment and Coastal Wetlands with High (Temporal/Spatial/Spectral) Resolution Satellite Images

Tingwei Cui1,2,3, Shubha Sathyendranath4, Yi Ma5, Stefan Simis4, Guangbo Ren5, Jianbu Wang5, Stephen Goult4, Rongjie Liu5, Ping Qin6, Yanfang Xiao5, Bing Mu6

1Sun Yat-Sen University (SYSU), People's Republic of China; 2Key Laboratory of Tropical Atmosphere-Ocean System, Ministry of Education, China; 3Southern Marine Science and Engineering Guangdong Laboratory, China; 4Plymouth Marine Laboratory (PML), Plymouth UK; 5First Institute of Oceanography (FIO), Ministry of Natural Resources, China; 6Ocean University of China (OUC), China

High resolution, in the temporal, spatial or spectral dimensions is one of the major trends of satellite remote sensing, with which one may derive more detailed information from the earth observation data. The paper summarizes the main results of the Dragon-4 coastal zone project (2016-2020), the objective of which is to explore and demonstrate the technical possibility and capability of the high resolution remote sensing in the monitoring of suspended sediment and coastal wetlands, whose variability is of vital importance to human being. Specifically, in the monitoring of suspended sediment, new retrieval algorithms were developed and applied to the geostationary and the polar-orbiting optical satellite images for spatio-temporal variability analysis. For the monitoring of coastal wetlands, new algorithms were developed for wetland types classification in fine scale to identify invasive species from hyperspectral images, aboveground carbon storage and water clarity estimation from high spatial resolution satellite images. With these algorithms, the distribution of the invasive species S. alterniflora in the wetlands were mapped, and the carbon storage per unit area of the estuarine wetlands was estimated.



9:50am - 10:10am
Accepted
ID: 221 / Dr4 S.2.2: 5
Oral Presentation for Dragon 4
Oceans & Coastal Zones: 32235 - Microwave Satellite Measurements for Coastal Area and Extreme Weather Monitoring

Microwave Satellite Measurements For Coastal Area And Extreme Weather Monitoring

Ferdinando Nunziata1, Xiaofeng Li2, Armando Marino3, Weizeng Shao4, Marcos Portabella5, Xiaofeng Yang6

1Università degli Studi di Napoli Parthenope, Italy; 2Institute of Oceanography, Chinese Academy of Sciences, China; 3Stirling University, UK; 4Shanghai Ocean University, China; 5The Institute of Marine Sciences, Spain; 6State Key Laboratory of Remote Sensing Science, Chinese Academy of Sciences, China

In this paper, the main outcomes relevant to the European Space Agency (ESA) – Ministry of Science and Technology Dragon 4 cooperation project ID 32235 “Microwave satellite measurements for coastal area and extreme weather monitoring” are reported. The project is to strengthen the Sino-European research cooperation in the framework of the exploitation of ESA, Chinese and third-party mission Earth Observation microwave satellite data to perform an effective monitoring of coastal areas, even under extreme weather conditions. An integrated approach, based on the use of complementary microwave sensors (e.g.; multi-frequency and multi-polarization Synthetic Aperture Radar, scatterometer and radiometer), together with ancillary information coming from independent sources, i. e., optical imagery, numerical simulations and ground measurements, is designed.

The main outcomes are both theoretical (i.e.; new models and algorithms have been developed to deal with marine target detection, sea pollution, sea surface wind estimation, coastline extraction) and applicative (i.e.; user-friendly maps have been provided that, based on an intelligent processing of remotely sensed measurements, can coastal area management).

Nunziata-Microwave Satellite Measurements For Coastal Area And Extreme Weather Monitoring-221Oral4.pdf


10:10am - 10:30am
Accepted
ID: 288 / Dr4 S.2.2: 6
Oral Presentation for Dragon 4
Oceans & Coastal Zones: 31451 - Oceanic and Atmospheric Processes in Chinese Coastal Zones

Multi-Sensor Study of Upwelling Including SAR

Werner Alpers1, Francesco Bignami2, Kan Zeng3

1University of Hamburg, Germany; 2Istituto di Scienze Marine, CNR, Rome, Italy; 3Ocean University of China, Qingdao, China

In studies of upwelling, usually data from infrared and optical sensors are used which provide information on the sea surface temperature (SST) and the chlorophyll-a (Chl-a) concentration. However, when including synthetic aperture (SAR) additional information on upwelling can be obtained. Areas of cold upwelled water becomes visible on SAR images as areas of reduced image intensity because cold water changes the stability of the air-sea interface which causes a reduction of the normalized cross section (NRCS). Since SAR is ultra-sensitive to variations in the small-scale sea surface roughness, and since variable surface currents associated upwelling modulate, boundaries of upwelling become visible on SAR images as bright lines. Due to its high resolution, SAR also can detect internal waves and sub-mesoscale eddies, which are sometimes present in upwelling areas. In this paper, we analyze SAR images acquired by the European satellites Sentinel-1A and 1B and the Chinese satellite Guofen-3 (GF-3) satellite that show radar signatures of upwelling caused by coastal winds, cyclonic eddies, and cyclonic meanders. The investigation is focused on the upwelling areas south of Sicily in the Mediterranean Sea, south of South Africa, the Strait of Taiwan, and north of Taiwan.

 
10:50am - 12:10pmDr4 S.1.3: URBANIZATION & SMART CITIES, AGRICULTURE, FOOD & WATER, & CAL / VAL
Workshop: Dragon 4
Session Chair: Prof. Yifang Ban
Session Chair: Dr. Jinlong Fan

URBANIZATION & SMART CITIES
ID. 32248 EO 4 Urban / Smart Cities

AGRICULTURE, FOOD & WATER
ID. 32275 EO4 Agricultural Resources
ID. 32194 Crop Mapping with EO data

CALIBRATION/VALIDATION
ID. 32426 Calibration 4 Quantitative RS

Dragon 4 
 
10:50am - 11:10am
Accepted
ID: 303 / Dr4 S.1.3: 1
Oral Presentation for Dragon 4
Land & Environment: 32248 - Earth Observation Based Urban Services for Smart Cities and Sustainable Urbanization

EO4SmartCities: Earth Observation Based Urban Services for Smart Cities and Sustainable Urbanization

Yifang Ban1, Chenghu Zhou2, Paolo Gamba3, Peijun Du4, Constantinos Cartalis5, Huili Gong6, Mi Jiang7, Xin Huang8, Yinghai Ke6

1KTH Royal Institute of Technology, Sweden; 2Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences; 3University of Pavia, Italy; 4Nanjing University, China; 5University of Athens, Greece; 6Capital Normal University, China; 7Hohai University, China; 8Wuhan University, China

Abstract submission pending by 31/05/2021

Ban-EO4SmartCities-303Oral4.pdf


11:10am - 11:30am
Accepted
ID: 275 / Dr4 S.1.3: 2
Oral Presentation for Dragon 4
Land & Environment: 32275 - Combined Exploitation Of Sino EU Earth Observation Data for Supporting The Monitoring and Management of Agricultural Resources

Sino–EU Earth Observation Data to Support the Monitoring and Management of Agricultural Resources

Raffaele Casa2, Wenjiang Huang3, Giovanni Laneve5, Stefano Pignatti1, Guijun Yang4, Pablo Marzialetti5, Nada Mzid2, Simone Pascucci1, Massimo Tolomio2, Deepak Upreti2, Hao Yang4

1CNR Institute of Methodologies for Environmental Analysis (CNR IMAA), Italy; 2Department of Agricultural and Forestry scieNcEs (DAFNE) Università della Tuscia (IT); 3Aerospace Information Research Institute, Chinese Academy of Sciences; 4Beijing Research Center for Information Technology in Agriculture (China); 5Earth Observation Satellite Images Applications Lab (EOSIAL) Università di Roma 'La Sapienza'

Complex agricultural systems comprise a large array of biophysical and physiological processes so that novel approaches and algorithms are needed to optimize the contribution of Earth Observation (EO) data to the monitoring capability with the aim of developing more sustainable management practices. This paper presents the results of research activities carried out within the ESA-MOST Dragon4 framework focused on the topic of agricultural resources. SINO and EU research groups exploited ESA and Third Party Mission data together with the Chinese EO resources in the agricultural domain both considered at regional or local scale. On different test cases, SINO-EU satellite data have been processed to retrieve biophysical variables related to crop vegetation status and to the derivation of proxy variables linked to the water and nitrogen cycling in the cereals agro-ecosystems. The paper encompasses two research avenues: i) retrievals of biophysical variables of crop and yield prediction; ii) food security. Firstly, optimal procedures (spectral indices, non-kernel-based and kernel-based Machine Learning Regression Algorithms) for retrieving biophysical crop variables (LAI and pigment) by exploiting the spectral information of current multispectral optical satellite were analyzed. Secondly assimilation of multivariate and multi-scale remotely sensed variables into crop models have been performed to retrieve yield and quality estimation under abiotic stress factors both at farm and regional scale. Lastly, field studies allowed to derives spectral index sensitive to the biotic stress (pathogen) of crops. Pathogen models combined to EO data products aim to estimate the rate of pests and diseases recognition and spreading. The combined results of these activities showed that most of the research objectives in the agricultural domain are interconnected and dependent on knowledge flow between them and that the EO exploitation in Chinese and European agriculture, can promote best practices for environmentally and profitable sustainable production through improving resource use efficiency.

Casa-Sino–EU Earth Observation Data to Support the Monitoring and Management-275Oral4.pdf


11:30am - 11:50am
Accepted
ID: 246 / Dr4 S.1.3: 3
Oral Presentation for Dragon 4
Land & Environment: 32194 - Crop Mapping with combined use of European and Chinese Satellite Data

Crop Mapping with combined use of European and Chinese Satellite Data

Jinlong Fan1, Pierre Defourny2, Xiaoyu Zhang3, Qinghan Dong4, Limin Wang5

1National Satellite Meteorological Center, China, People's Republic of; 2Earth and Life Institute, Universite Catholique de Louvain, Belgium; 3Ningixa Institute of Meteorological Sciences, China, People's Republic of; 4Department of Remote Sensing, Flemish Institute of Technological Research, Belgium; 5MOA Key Laboratory of Agricultural Remote Sensing, Institute of Agro-Resources and Regional Planning, Chinese Academy of Agricultural Sciences, China, People's Republic of

This Dragon 4 project 32194 was to investigate the methodology of combined use of European and Chinese high and Medium Satellite data to assess crop and produce crop maps. This project was composed of two subprojects. One was focusing on the high-resolution satellite data and another was focusing on the medium resolution satellite data. The first subproject was entitled crop mapping with time series of high resolution European and Chinese satellite data. The Sentinel-2 and GF-1(GaoFen or high resolution in English) onboard European and Chinese satellites, respectively, were supposed to use as both have quite similar spectral bands. This subproject aimed to take both advantages of Sentinel-2 and GF-1 data to produce a better and earlier crop mapping. The team was supposed to apply and adapt the crop mapping approach of ESA (European Space Agency) Sent2Agri project to a Chinese site with time series of European and Chinese satellite images. The second subproject was entitled assessing crops with PROBA-V (PRoject for On-Board Autonomy–Vegetation) and FY-3 MERSI (Fengyun, Wind and Cloud in English, Medium Resolution Spectral Imager) data. The PROBA-V and FY3-MERSI both have quite similar channels and their own advantages. The new development of this kind of medium resolution satellite data in Europe and China was providing us an opportunity to investigate the possibility and the potential of using both PROBA-V and FY-3 MERSI Data for the crop assessment for large area. This subproject was going to focus on the crop mapping with both satellite data. The team developed the methods to handle both data and then get the information retrieved. With the implementation of this dragon project, the crop type maps were produced in the irrigated area in Northwest China with the sentinel 2A/B,GF-1,PROBA-V and FY3B-MERSI. The overall accuracies of resulting crop type maps from S-2 and GF-1 reached 94-97% while the overall accuracies from PROBA-V and FY3B-MERSI reached 88%. The methodology for the crop type classification was improved and benefited from the Sent2Agri system.

Fan-Crop Mapping with combined use of European and Chinese Satellite Data-246Oral4.pdf


11:50am - 12:10pm
Accepted
ID: 306 / Dr4 S.1.3: 4
Oral Presentation for Dragon 4
Land & Environment: 32426 - Calibration and Data Quality Assurance for Quantitative Remote Sensing

The Summary of Calibration and Data Quality Assurance for Quantitative Remote Sensing

Chuanrong Li1, Philippe Goryl2, Lingling Ma1, Jieying He3, Cheng Liu4, Pucai Wang5, Ning Wang1

1The Aerospace Information Research Institute, Chinese Academy of Sciences, China, People's Republic of; 2European Space Agency (ESA/ESRIN), Largo Galileo Galilei 1, 00044 Frascati (Roma), Italy; 3National Space Science Center, Chinese Academy of Sciences, Beijing 100190, China; 4University of Science and Technology of China, Hefei, Anhui, 230026, China; 5nstitute of Atmospheric Physics, Chinese Academy of Sciences, Beijing 100029, China

This project made profound studies on the in-orbit calibration and the product quality traceability of space-borne optical sensors, in-orbit calibration and product generation of microwave sensors, MAXDOAS benchmark observation in eastern China, and ground-based FTIR spectrometer benchmark measurement, the related achievements mainly include the following aspects:

(1) In this project, we have developed an SI-traceable automated radiometric calibration system, and established a whole uncertainty transfer link for field calibration. These achievements have been integrated in the "National high resolution remote sensing comprehensive calibration site", namely Baotou site, one of demonstrated sites of the International Committee on earth observation (CEOS)/Global Radiometric Calibration Network (RadCalNet). Under the framework of RadCalNet project, Baotou site could regularly provide the radiometric calibration standard product together with Europe Space Agency (ESA), and supporting the in-orbit performance evaluation of high-resolution sensors onboard series satellites in China, such as GF, ZY, TH, GJ.

(2) According to the higher requirements on radiometric accuracy of microwave RS sensors in the global meteorological and climate research, this project has developed a radiation benchmark transfer model from ground to satellite, and a traceability model from satellite to ground. These models improve the calibration accuracy of single satellite by 17% and improves the consistency of the sensors between generations by 11%.

(3) In-orbit radiometric calibration algorithm of hyperspectral payload also has been developed, and these channels shorter than 312 nm of TROPOMI have been re-calibrated, so that the fitting residual of SO2 spectrum was reduced from 0.40%~0.92% to 0.07%~0.14%. On basis of this, this project has proposed an SO2 retrieval method from the UV-VIS hyperspectral sensor onboard GF-5 satellite, and the retrieved result has been validated with 121 sets of weekly average in situ data in 12 months. It is demonstrated that bias for this method is reduced by 41%~123% comparing to the official TROPOMI products published by NASA/ESA, this confirms that the official products of ESA seriously overestimate the concentration of SO2 in China.

In this project, there are 10 participants with senior titles, 15 intermediate titles and 18 graduate students. Among them, Cheng Liu from the University of the Science and Technology of China won the 16th China Youth Science and Technology Award in 2020; Lingling Ma from the Aerospace Information Research Institute, Chinese Academy of Sciences (CAS), and Marc Bouvet from ESA, won the International Cooperation Partner Award for young scientists of CAS in 2020.

Li-The Summary of Calibration and Data Quality Assurance-306Oral4.pdf
 
10:50am - 12:10pmDr4 S.2.3: ATMOSPHERE, CLIMATE & CARBON CYCLE
Workshop: Dragon 4
Session Chair: Prof. Hartmut Boesch
Session Chair: Prof. Yi Liu

ID. 32070 CLIMATE-TPE
ID. 32271 Air Quality Over China
ID. 32301 Monitoring GHGs from Space
ID. 32296 LIDAR Observations

Dragon 4 
 
10:50am - 11:10am
Accepted
ID: 270 / Dr4 S.2.3: 1
Oral Presentation for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32070 - Monitoring Water and Energy Cycles at Climate Scale in the Third Pole Environment (CLIMATE-TPE)

Monitoring Water and Energy Cycles at Climate Scale in the Third Pole Environment (CLIMATE-TPE)

Z. {Bob} Su1, Yaoming Yaoming Ma2

1University of Twente, The Netherlands; 2Institute of Tibetan Plateau Research, Chinese Academy of Sciences, Beijing 100101, China

The CLIMATE-TPE project aimed to advance understanding the interactions between the Asian monsoon, the Tibetan Plateau surface and the plateau atmosphere in terms of water and energy budgets, which is essential for assessing and understanding the causes of changes in cryosphere, and hydrosphere in relation to changes of plateau atmosphere in the Asian monsoon system and for predicting the possible changes in water resources in the Third Pole Environment. A core innovation of the project was to verify or falsify recent hypotheses (e.g. links between plateau heating and monsoon circulation, snow cover and monsoon strength, soil moisture and timing of monsoon) and projections of the changes of glaciers and permafrost in relation to surface and tropospheric heating on the Tibetan Plateau as precursors of monsoon pattern changes and glaciers retreat, and their impacts on water resources in South East Asia. This paper reports results related to: (1) A platform of in-situ observation stations of hydrosphere-pedosphere-atmosphere-cryosphere-biosphere interactions over the Tibetan Plateau, (2) Multiyear in-situ L-Band microwave radiometry of land surface processes, (3) Evaluation and generation of land surface heat fluxes and evapotranspiration, (4) Climate scale monitoring of soil moisture and soil temperature and validation of large scale soil moisture products, (5) Trajectory of water vapor transport in the canyon area of Southeast Tibet, and (6) Vertical characteristics of water vapor exchange between upper troposphere and lower stratosphere.

Su-Monitoring Water and Energy Cycles at Climate Scale-270Oral4.pdf


11:10am - 11:30am
Accepted
ID: 226 / Dr4 S.2.3: 2
Oral Presentation for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32271 - Air Quality Over China

Air Quality Over China

Ronald van der A1, Gerrit de Leeuw1, Jianhui Bai2, Yong Xue3, Costas Varotsos4, Zhengqiang Li5, Cheng Fan5, Jieying Ding1, Ioannes Cristodoulakis4, Xingfeng Chen5, Xuewei Hou6, Jing Wang6, Kainan Zhang7, Ying Zhang5, Marina Zara1

1KNMI, The Netherlands; 2IAP-CAS, China; 3CUMT, China; 4University of Athens, Greece; 5AIR-CAS, China; 6NUIST, China; 7Chang'an University, China

The strong economic growth in China in recent decades, together with meteorological factors, has resulted in serious air pollution problems, in particular over large industrialized areas with high population density. To reduce the concentrations of pollutants, air pollution control policies have been successfully implemented, resulting in the gradual decrease of air pollution in China during the last decade, as evidenced from both satellite and ground-based measurements. The aim of the DRAGON4 project “Air quality over China” was the determination of trends in the concentrations of aerosols and trace gases, quantification of emissions using a top-down approach and gain a better understanding of the sources, transport and underlying processes contributing to air pollution. This was achieved through (a) satellite observations of trace gases and aerosols to study the temporal and spatial variability of air pollutants (b) derivation of trace gas emissions from satellite observations to study sources of air pollution and improve air quality modeling and (c) study effects of haze on air quality. In these studies, the satellite observations are complemented with ground-based observations and modeling.



11:30am - 11:50am
Accepted
ID: 307 / Dr4 S.2.3: 3
Oral Presentation for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32301 - Monitoring Greenhouse Gases from Space

Monitoring Greenhouse Gases from Space

Hartmut Boesch1, Yi Liu2, Johanna Tamminen3, Dongxu Yang2, Zhaonan Cai2, K. Che2, Antonio Di Noia1, Liang Feng4, Janne Hakkarainen3, Iolanda Ialongo3, Nikoleta Kalaitzi1, Tomi Karppinen3, Rigel Kivi3, Ella Kivimäki3, Hannakaisa Lindqvist3, Paul Palmer4, Robert Parker1, Simon Preval1, Jing Wang2, Alex Webb1, L. Yao2

1School of Physics and Astronomy, University of Leicester, Leicester, UK; 2Key Laboratory of the Middle Atmosphere and Global Environmental Observation, Institute of Atmospheric Physics, Chinese Academy of Sciences, Beijing, China,; 3Finnish Meteorological Institute, Helsinki and Sodankylä, Finland; 4School of GeoSciences, University of Edinburgh, Edinburgh, UK

The increase in atmospheric greenhouse gas concentrations of CO2 and CH4 due to human activities is the main driver of the observed increase in surface temperature by more than 1oC since the pre-industrial area. To limit the increase in global surface temperature to 1.5°C, the 2015 United Nations Climate Change Conference held in Paris, most nations agreed to reduce greenhouse gas emissions.

Atmospheric observations of greenhouses gas concentrations from satellites will play an important tole for monitoring the effectiveness of any policies aimed at reducing emission. Satellite remote sensing of CO2 and CH4 is now well established thanks to missions such as NASA OCO-2, Japanese GOSAT and the Chinese TanSat missions which have allowed us to build a long-term record of atmospheric GHG concentration from space. They also give us a first glimpse into CO2 and CH4 enhancements related to anthropogenic emission which helps to pave the way towards the future missions aimed at a Moni­toring & Verification Support (MVS) capacity for the global stock take of the Paris agreement.

The pioneering GOSAT and OCO-2 missions have demonstrated the power of satellite observations to constrain surface fluxes of CO2 and CH4 and to inform on regional budgets but it has also emphasised the importance to utilise ground- based measurement to validate the satellite products and intercomparisons of multiple retrieval algorithms, especially to improve the accuracy of satellite retrievals to reduce the interference by many other factors, such as aerosols, clouds or ground surface properties.

The overall goals of this project has been to characterize and improve the TanSat XCO2 retrieval and their uncertainty quantification by retrieval intercomparisons and experiments using Chinese and European algorithms and by using TCCON and Chinese ground-based measurements and extend the validation previously applied for GOSAT and OCO-2 data to TanSat XCO2 and also analyse Sentinel 5 Precursor XCH4 observations. AirCore profile observations of greenhouse gases at Sodankylä has been used to support the validation at high latitudes. The XCO2 datasets obtained from TanSat have also been evaluated against model calculations and we have used XCO2 from satellites data to constrain surface fluxes over China and globally using surface flux inverse calculations.

In this presentation, we will describe the project, summarize the project objectives and give an overview over the project achievements.



11:50am - 12:10pm
Accepted
ID: 322 / Dr4 S.2.3: 4
Oral Presentation for Dragon 4
Atmosphere, Climate & Carbon Cycle: 32296 - Lidar Observations from ADM-Aeolus and EarthCARE - Validation, Study of Long-range Transport of Aerosol and Preparation of a Future Chinese CO2 Lidar Mission

Validation of Wind Lidar Observations from Aeolus, Study of Long-range Transport of Aerosol and Preparation of a Future Chinese CO2 Lidar Mission

Oliver Reitebuch1, Songhua Wu2,3, Weibiao Chen4, Christian Lemmerz1, Oliver Lux1, Fabian Weiler1, Benjamin Witschas1, Guangyao Dai2, Xiaoquan Song2,3, Bingyi Liu2,3, Xiaochun Zhai2,5, Jiqiao Liu4

1Deutsches Zentrum f. Luft- u. Raumfahrt DLR, Institute of Atmospheric Physics, 82234 Wessling, Germany; 2Department of Marine Technology, College of Information Science and Engineering, Ocean University of China, Qingdao 266100, China; 3Laboratory for Regional Oceanography and Numerical Modeling, Pilot National Laboratory for Marine Science and Technology, Qingdao 266237, China; 4Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China; 5National Satellite Meteorological Center, China Meteorological Administration, Beijing 100081, China

The global wind field effects the atmospheric circulation, the atmospheric carbon cycle, marine–atmosphere circulation, and aerosol activities. Aerosols play a key role in climate change and air quality because of its direct, semi-direct, and indirect effects on the radiation budget. As the most important anthropogenic greenhouse gas, carbon dioxide plays a key role in climate studies and for environment monitoring. The European Space Agency (ESA) developed the Aeolus mission to provide global profiles of wind, clouds and aerosols properties. Aeolus carries the first wind lidar in space (ALADIN) and was successfully launched in August 2018. The lidar mission ACDL (Aerosol and Carbon dioxide Detection Lidar) implemented by China is currently scheduled for launch in 2021 to measure CO2 and aerosol from space. The activities of the project aim at validating Aeolus, the study of long-range transport of aerosol, and the preparation of the Chinese CO2 spaceborne lidar mission. The first objective is to validate Aeolus wind products based on ground-based and airborne wind lidar observations, and is undertaken by DLR (Deutsches Zentrum f. Luft- und Raumfahrt) and OUC (Ocean University of China). The second objective is to carry out the preparation of ACDL through ground-based and airborne lidar observations by CAS-SIOM (Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences), building on the experience made with the validation of Aeolus. The third objective is to study the long-range dust transport, based on ground-based and satellite lidar observations, by OUC.

Already within the first weeks after the launch of ESA´s Earth Explorer mission Aeolus on 22 August 2018, the first atmospheric backscatter measurements and wind profiles were obtained on 5 and 12 September 2018, respectively. This swift availability of observations from ALADIN after launch is considered as a great success for ESA, space industry as well as the algorithm and processor developer teams that had been working together for more than 15 years before launch. This cooperation from the pre-launch phase of Aeolus was extended within a new framework for exploitation activities named Data Innovation and Science Cluster (DISC) and started in January 2019. The Aeolus instrument performance wrt. random and systematic errors for the wind products were assessed by the Aeolus DISC using the numerical weather prediction (NWP) model from the European Centre for Medium-Range Weather Forecasts (ECMWF). In addition, a number of airborne and ground-based validation campaigns were performed for assessing the wind and aerosol product quality by means of collocated observations. DLR performed 3 airborne validation campaigns since the launch of Aeolus with the DLR Falcon 20 aircraft which was equipped with the airborne demonstrator of Aeolus (A2D) and a 2-µm Doppler lidar as a wind reference instrument. The first two campaigns took place in Central Europe and the third one in the region of the North Atlantic around Iceland and Greenland, delivering a comprehensive dataset to be used for the validation of the Aeolus wind product quality. The aim of the Aeolus mission is to provide global observations of vertical profiles of one component of the horizontal wind vector with sufficient accuracy and precision to demonstrate a positive impact on NWP analysis and forecasts. Impact experiments using the ECMWF model show a significant positive impact of Aeolus on the analysis and weather forecast. Today Aeolus observations are used operationally by several NWP centres including ECMWF, German Weather Service (DWD), Météo-France and UK Met Office.

To validate the data products of Aeolus and to varify the measurement principles of ACDL, the following activities are carried out from China side. Ground-based WACAL (WAter vapor, Cloud and Aerosol Lidar) was developed by the lidar group at OUC (Ocean University of China) and deployed during several field campaigns, including the third Tibetan Plateau Experiment of Atmospheric Sciences (TIPEX III) in Naqu (31.5°N, 92.05°E) with a mean elevation of more than 4500 m above MSL in summer of 2014. For validation of Aeolus wind HLOS data products, CDLs (Coherent Doppler Wind Lidars) developed by OUC were also deployed at 17 observation stations in the coastal zone and China Seas for long-term simultaneous observations with Aeolus. The CAL/VAL campaign contributes to exploit the Aeolus wind observations for the study of atmospheric dynamics. As the science application, a long-term large-scale Sahara dust transport event occurred during 14 June and 27 June 2020 is tracked with the spaceborne lidars ALADIN and CALIOP observations and the models ECMWF and HYSPLIT analysis. During 9 and 19 March 2019, an IPDA CO2 lidar airborne demostrator was mounted on an aircraft to perform the observation of CO2. The simultaneous ground-based lidars, Fourier Transform infrared Spectrometer (FTS) and sun photometers are emplored for the validation of CO2 lidar airborne demostrator. Accordingly, the calibration and retrieval method for aerosol optical properties with CDL are developed with the co-located sun photometer measurements.

Reitebuch-Validation of Wind Lidar Observations from Aeolus, Study of Long-range Transport of Aerosol and.pdf
 
Date: Wednesday, 21/July/2021
8:30am - 9:30amDr4 S.1.4: ECOSYSTEMS, FOREST & GRASSLANDS
Workshop: Dragon 4
Session Chair: Prof. Laurent Ferro Famil
Session Chair: Prof. Erxue Chen

ID. 31470 FOREST DRAGON 
ID. 32396 Drylands in China

Session finishes at 09:10 CEST, 15:10 CST

Dragon 4 
 
8:30am - 8:50am
Accepted
ID: 314 / Dr4 S.1.4: 1
Oral Presentation for Dragon 4
Land & Environment: 31470 - Forest biophysical retrievals and land cover dynamics using multi-temporal, multi-sensor (SAR-optical-LiDAR) and multi-resolution EO sensors for China and selected Asian regions (FOREST Dragon 4)

Forest Dragon 4 Final Results

Zengyuan Li1, Christiana Schmullius2, Erxue Chen1, Laurent Ferro-Famil3, Yong Pang1, Xin Tian1

1Chinese Academy of Forestry, P.R.China; 2University Jena, Germany; 3IETR/University of Rennes 1, France

Regional application, topographic influence, and mixed pixel decomposition have become the three major scientific problems in the retrieval of forest parameters by multi-source remote sensing data. This project has proposed some methods for the prediction of the mountain forest height, the canopy closure, and the effective leaf area index. Then, the forest above ground biomass model was constructed based on vegetation indices, topographic indices and these structure parameters with physical significance.

In the aspect of three-dimensional parameter inversion of forest based on SAR, the quantitative processing methods of satellite-airborne PolSAR and InSAR data is innovated, which reduce the influence of terrain and improve the estimation accuracy of forest structure parameters. Moreover, a feature selection method for PolSAR based on genetic algorithm is proposed, which reduces the impact of feature redundancy on the accuracy of PolSAR classification and quantitative estimation. In addition, the adaptive TomoSAR spectrum analysis method is innovated, which effectively improve the quality of TomoSAR profile imaging. And a series of PolSAR/PolInSAR calibration and application research are carried out, the development of the PolSARpro software module and the translation of PolSAR classics are completed.

Biodiversity underpins the health of ecosystems and the services they provide to society. With the help of forest vertical structure parameters derived from LiDAR data, the SVR model for species diversity estimation show better result than using GF-2 multi-spectral or hyperspectral data only. The merging derived waveform parameters from synthesize waveform and the variation of spectral indices and texture that derived from GF-2 imagery showed a satisfied result for four different species diversity estimation. Synergizing passive and active remote sensing offers tremendous potential for forest species diversity estimation at regional scale.

Li-Forest Dragon 4 Final Results-314Oral4.pdf


8:50am - 9:10am
Accepted
ID: 261 / Dr4 S.1.4: 2
Oral Presentation for Dragon 4
Land & Environment: 32396 - Land Degradation Surveillance of Drylands in China

Final Report Of Dragon 4 Project (ID:32396) :Land Degradation Surveillance Of Ddrylands In China

Zhihai Gao1,2, Gabriel del Barrio3, Li Xiaosong4, Jaime Martinez-Valderrama5, Bin Sun1,2, Maria Sanjuan3, Yan Ziyu1,2, Alberto Ruiz3

1Institute of Forest Resource Information Techniques, Chinese Academy of Forestry, Beijing 100091, China; 2Key Laboratory of Forestry Remote Sensing and Information System, NFGA, Beijing 100094, China; 3Estacion Experimental de Zonas Aridas, Consejo Superior de Investigaciones Científicas, La Cañada de San Urbano, Almeria 04120, Spain.; 4Key Laboratory of Digital Earth Science, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100094, China; 5Instituto para la Investigación del Madio Ramón Margalef, San Vicente del Raspeig 03690, Alicante, Spain

In Dragon 4 project 32396, it involves the use of geomatic methods on remotely sensed data from both ESA and Chinese side and other geospatial databases for explored the land degradation surveillance of drylands in china. This aim frames the following concrete objectives:1)To develop methods of vegetation & soil bio-physical variables retrieval based on satellite data in drylands, at local and regional scale;2)To enhance, benchmark and validate two novel approaches, i.e. Rain Use Efficiency (2dRUE) method and Climate response in Net Primary Productivity (CRNPP)method to land degradation surveillance by remote sensing 3)To use the said approaches to map land degradation in a study area defined by the Potential Extent of Desertification in China (PEDC). After four years joint-research, following result have been achieved. 1) It is found that incorporating the red-edge bands of Sentinel-2 in LSMM could improve the accuracy of Non-Photosynthetic Vegetation Fraction estimation, utiliz-ing the VV/VH bands of Sentinel-1 was helpful for distinguishing shrub and grassland coverage and combing time series of photosynthetic and non-photosynthetic vegetation could effectively estimate the SOM in topsoil of desertified land.(2) Both two methods of land degradation could reflect the spatial distribution, driving force and the rate of degradation / restoration in the PEDC well.

Gao-Final Report Of Dragon 4 Project-261Oral4.pdf
 
8:30am - 9:30amDr4 S.2.4: CRYOSPHERE
Workshop: Dragon 4
Session Chair: Dr. Francesca Pellicciotti
Session Chair: Prof. Hui Lin

ID. 32388 Cryosphere Dynamic over HMA
ID. 32437 EOCRYOHMA

Session finishes at 09:10 CEST, 15:10 CST

Dragon 4 
 
8:30am - 8:50am
Accepted
ID: 205 / Dr4 S.2.4: 1
Oral Presentation for Dragon 4
Cryosphere & Hydrology: 32388 - Monitoring Cryosphere Dynamic over High Mountain Asia with Integrated Earth Observations and Evaluating Its Hydrological Impacts at Upstream River Basin

Two Periods of Glacier Mass Balance at Central and Eastern Nyainqentanglha Derived from Multi-platform Bistatic SAR Interferometry

Li Gang1, Hui Lin2, Qinghua Ye3, Liming Jiang4, Andrew Hooper5

1School of Geospatial Engineering and Science, Sun Yat-Sen University; 2School of Geography and Environment, Jiangxi Normal University, China; 3Institute of Tibetan Plateau Research, Chinese Academy of Sciences, China; 4State Key Laboratory of Geodesy and Earth’s Dynamics, Innovation Academy for Precision Measurement Science and Technology, Chinese Academy of Sciences; 5COMET, School of Earth and Environment, University of Leeds, UK

Bistatic SAR interferometry is an essential technique of satellite geodesy and is capable of observing glacier height changes. Most recent studies focus on the decadal scale due to limitations of data acquisition and precision. Eastern Nyainqentanglha distributes the majority parts of maritime glaciers and presents with the quickest glacier mass loss rate at High-mountains Asia. Here we obtained two epochs of TerraSAR-X/TanDEM-X SAR images observed in ~2012 and ~2017. Together with the SRTM topography data that observed in 2000 we derived geodetic glacier mass balances in two periods (2000 - ~2012 / ~2012 - ~2017). We proposed three InSAR procedures for deriving the second period, which yields basically identical results of geodetic glacier mass balance. Topography differencing between DEMs derived by TerraSAR-X/TanDEM-X shows better precision than between TerraSAR-X/TanDEM-X and SRTM, and are capable of providing geodetic glacier mass balance information at sub-decadal scale. The patterns of glacier mass balance are almost identical before and after ~2012 and show with slightly increasing glacier loss rate. The increase of glacier height downwasting was more severe at lower sections. Glaciers distribute at the southeastern present with quicker lost rates than the northwestern part.



8:50am - 9:10am
Accepted
ID: 311 / Dr4 S.2.4: 2
Oral Presentation for Dragon 4
Cryosphere & Hydrology: 32437 - Earth Observation to Investigate the Characteristics and Changes of the Cryosphere in High Mountain Asia (EOCRYOHMA)

Earth Observation to Investigate Characteristics and Changes of Glaciers and Rock Glaciers in High Mountain Asia

Tobias Bolch1, Tandong Yao2, Philipp Rastner3, Guoqing Zhang2, Atanu Bhattacharya1, Owen King1, Yan Hu4, Lin Liu4

1University of St Andrews, United Kingdom; 2Institute of Tiebtan Plateau Research, Chinese Academy of Sciences, China; 3University of Zurich, Switzerland; 4The Chinese University of Hong Kong, Hong Kong, China

The cryosphere in high elevation regions is sensitive to the effects of climate change. Meltwater from the cryosphere contributes a significant fraction of the freshwater resources in China and in the countries receiving water from the Third Pole. Within the ESA Dragon 4 project we investigated glacier mass changes in different regions using multi-temporal stereo satellite imagery since the 1960s. Detailed investigations including mapping of rock glaciers have been performed in the Poiqu basin in central Himalaya. Results reveal that in most regions glacier mass loss continuously accelerated and that even in regions where glaciers have been in balance with climate mass loss now prevails. The greatest mass loss has been found in Northern Tien Shan and the Central Himalaya with mass loss rates between 0.35 and 0.40 mw.e.a-1 and the lowest in eastern Pamir (~0.05 mw.e.a-1). The mass loss has been primarily driven by an increase in summer temperature and is further accelerated by proglacial lakes which have become abundant in most regions with the ongoing glacier recession. The glacial lake area in Poiqu basin more than doubled between 1964 and 2017 from about 9.7 km² to more than 20 km². At the same time glaciers were shrinking at a rate of more than 0.5% per year. Rock glaciers are abundant in Poiqu region covering about 21 km², with is more than 10% of the glacier area (about 190 km²) in 2015. With ongoing glacier wastage the rock glaciers can become an increasingly important water resource.

Bolch-Earth Observation to Investigate Characteristics and Changes-311Oral4.pdf
 
8:30am - 9:30amDr4 S.2.5: HYDROLOGY
Workshop: Dragon 4
Session Chair: Prof. Massimo Menenti
Session Chair: Prof. Xiaoling Chen

ID. 32442 EOWAQYWET
ID. 32397 CAL/VAL Mw data
ID. 32439 MUSYCADHARB

Dragon 4 
 
8:30am - 8:50am
Accepted
ID: 337 / Dr4 S.2.5: 1
Oral Presentation for Dragon 4
Cryosphere & Hydrology: 32442 - New Earth Observations Tools for Water Resource and Quality Monitoring in Yangtze Wetlands and Lakes (EOWAQYWET)
Solid Earth & Disaster Risk Reduction: 32244 - Earth Observations for Geohazard Monitoring and Risk Assessment

New Earth Observations tools for Water resource and quality monitoring in Yangtze wetlands and lakes

Herve Yesou1, Hongtao Duan2, Juliane Huth3, Yachang Chang4, Steven Loiselle6, Zhenguo Niu5, Julien Briant1, Martin Wikelski4, Yeaqiao Wang7, Shuhua Qi7, Lei Cao8, Claudia Kuenzer3, Jean-François Cretaux9, Xijun Lai2, Xiaoling Chen10

1ICUBE SERTIT, Unv. Strasbourg, France; 2NIGLAS, nanjing, Pr China; 3Earth Obs. Center, DLR, Wessling, Germany; 4Max Planck inst., Radolfzell, Germany; 5Radi, Beijing, PR China; 6CSGI, Unv Sienna, Italy; 7PLKL, Nor. Univ. Nanchang, PR China; 8RCEES, CSA, Biejing, PR China; 9LEGO,? Toulouse, France; 10LIESMARS, univ Wuhan, PR China

The United Nations Sustainable Development Goals (SDGs) identify the sustainable management of freshwater as crucial for providing the economic, social and environmental well-being of the present and future generations. Lakes in the intermediate basin of the Yangtze River (YIB), play a fundamental role in regional bio-geochemical cycles and provide major services to the YIB communities including water supply, water purification, flood regulation (SDG 6.1.1 &6.3.2), climate regulation (SDG 13), food (SDG 2), recreational opportunities (SDG 3) and biodiversity (SDG 15). However, the extreme temporal and spatial variability of these massive but extremely shallow ecosystems prevents a reliable quantification of their dynamics with respect to changes in climate and land use.

Over these complex landscapes, a priority task is improving the monitoring and assessment capacity of authorities of these important resources. By exploiting the Sentinel HR constellation, well as Chinese VHR satellites, Dragon researchers developed automated or semi-automated methods to explore spatial and temporal changes to the complex ecosystems of Dongting and Poyang Lakes, as well as more than 80 water bodies in the YIB. Sentinel systematic acquisitions were used to create a dense time series, making analysis more consistent, also to over a year of a prioritised S1 acquisition. Now it is a 20 years monitoring of Poyang lake water surfaces that have been achieved. Water height was also monitored over the intermediate Yangtze basin, and combined with Hydroweb data in 3 lakes, and a dozen of virtual stations on the major rivers. One task consisted in addition to verify that all most sensitive areas would be covered by the OLTC procedure. This Sentinel3 on-board command served as the base to validate the reception window on the a priori elevation of the study lakes.

The phenology of wetland vegetation was shown to link to the dynamics of water level of the lake across the year and have important impacts on the migratory birds. Understanding the relationship between hydrological regimes and the spatial-temporal pattern of wetland vegetation is vital to collaborate the economic development and the protection of the migratory birds in the Poyang Lake, even the low reaches of Yangzi River. It was demonstrated that the White-naped cranes Antigone vipio wintering at Poyang Lake wetlands, southeast of China, mainly used the habitats created by the hydrological variations, i.e. seasonal water level fluctuation. Based on the results of the Dragon project, it was identified that White-naped cranes follow the water level recession process, keeping close to the boundary of water patches at most of the time. Similar approach has been followed also for swan geese and diving ducks.

The second pilar of the project was focused on water quality assessment and monitoring. In the Yangtze area, lakes supply freshwater and ecosystem services to nearly a billion people. Lake transparency, usually denoted by Secchi disk depth (SSD), is responsive to catchment characteristics, regulates many ecosystem features, and serves as a sentinel of water quality. Understanding spatio-temporal variations in water quality allow for the identification of major drivers of change and possible management and mitigation alternatives. Water transparency was retrieved over lakes for 2000-2018 models were developed to explore changes in catchment conditions, climate and human activities. The results showed that hydrological and climate related drivers strong influence water quality in these sensitive but vital lakes. Lake depth plays a mjor role in seasonal variations of sediment resuspension, and therefore transparency in the YIB. Likewise, wind speed and direction also influence lake water quality. During the summer, weak wind speeds and increased precipitation increase lake depth, leading to maximum transparency. Using the monthly climatological data, lakes showed two possible trends, based on the hydrological conditions of the lake. For the three largest lakes, the Dongting, Poyang, and Chaohu, in-situ water levels were higher in summer, limiting resuspension of lake sediments, often with high concentrations of phosphorus and other contaminants.

Dragon 4 results highlights the benefits of interdisciplinary approaches to gain a better understanding of managing complex freshwater ecosystems and ecosystem services. The results of the Dragon studies are being used to improve water resource monitoring and show the potential for collaborative research in Earth Observation.



8:50am - 9:10am
Accepted
ID: 335 / Dr4 S.2.5: 2
Oral Presentation for Dragon 4
Cryosphere & Hydrology: 32397 - Calibration and Validation of Microwave Remote Sensing Data for Water Cycle Research

Calibration and Validation of Microwave Remote Sensing Data for Water Cycle Research

Jiancheng Shi1, Yann Kerr2, Dongkai Yang3, Alain Geiger4, Tianjie Zhao5, Jinmei Pan5, Mutian Han3, Ladina Steiner4, Dabin Ji5, Rui Li5, Michael Meindl4, Panpan Yao5, Yunlong Zhu3, Xuebao Hong3, Tao Chen5, Lu Hu5

1The National Space Science Center, Chinese Academy of Sciences,Beijing, China; 2CESBIO (CNRS/IRD/CNES/UPS), Toulouse, France; 3School of Electronic and Information Engineering, Beihang University,Beijing, China; 4Institute Geodesy and Photogrammetry, ETH, Zurich, Switzerland; 5The Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China

Soil moisture and snow water monitoring using microwave remote sensing data has gained wide interests in recent years. In order to improve the accuracy of soil moisture and snow water estimations, in the Shandian River and Xiaoluan River basin, multi-resolution, multi-angle and multi-spectral airborne data were obtained. The near surface soil moisture (0 cm ~ 5 cm) ,200 m by 200 m quadrats and two soil moisture and temperature profile and precipitation networks were established. The result shows that the L-band active and passive observations exhibit a large variation of ~30 dB and ~80 K, respectively, corresponding to soil moisture range from 0.1 cm3/cm3 to 0.5 cm3/cm3; In Altay National Reference Meteorological station, L, C, and X, Ku and Ka band radiometers were installed and snow process model was validated. The result shows that the SNTHERM+MEMLS simulated TB showed an RMSE of 2.56 K and 3.3 K, respectively at 18.7 and 36.5 GHz vertical polarization, compared to ground-based radiometer measurements; Based on Global Navigation Satellite System-Interferometry and Reflectometry (GNSS-IR) technique, two methods were proposed to reconstruct the power of the direct and reflected signal. Experiment data were used to validate the proposed method, which demonstrated the feasibility of the proposed methods. The results showed that the retrieval error is within ±0.1 cm3/cm3 in most of the cases. Another experiment was carried out to measure the penetration depth of GNSS signal directly. The results showed that the maximum penetration depth under 0.1577 ~ 0.3394 cm3/cm3 soil moisture is less than 21 cm. To determine the snow water content (SWE) a new set-up using refracted signals and path-delay estimation methods were devised, tested and validated. The comparison with state-of-art snow pillow, snow scale, and manual measurements showed an agreement below 5%. It reveals that radiometer, radar observation and GNSS-IR multiple microwave remote sensing technologies have great potentials for global water cycle key components retrievals.

Shi-Calibration and Validation of Microwave Remote Sensing Data-335Oral4.pdf


9:10am - 9:30am
Accepted
ID: 299 / Dr4 S.2.5: 3
Oral Presentation for Dragon 4
Cryosphere & Hydrology: 32439 - Multi-source Hydrological Data Products to Monitor High Asian River Basins and Regional Water Security (MUSYCADHARB)

Multi – source hydrological data products to monitor High Asian River Basins and regional water security

Massimo Menenti1, Xin Li2, Li Jia3, Kun Yang4, Francesca Pellicciotti5, Marco Mancini6, Maria Josè Escorihuela7, Jiancheng Shi8

1Delft University of Technology, 2600 GA Delft, The Netherlands; 2Institute of Tibetan Plateau Research, Chinese Academy of Sciences, Beijing 100101, China; 3State Key Laboratory of Remote Sensing Science, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100101, China; 4Ministry of Education Key Laboratory for Earth System Modeling, Department of Earth System Science, Tsinghua University, Beijing 10084, China; 5Swiss Federal Institute for Forest, Snow and Landscape Research WSL, 8903 Birmensdorf, Switzerland; 6Politecnico di Milano, Milano 20133, Italy; 7IsardSAT, Barcelona 08001, Spain; 8National Space Science Center, Chinese Academy of Sciences, Beijing 100190, China

The project explored the integrated use of satellite, ground observations and hydrological distributed models to support water resources assessment and monitoring in High Mountain Asia and to clarify the roles of the interactions between the land surface and the atmosphere over the Tibetan Plateau in the Asian monsoon system. Hydrological data products were generated taking advantage of the synergies of European and Chinese data assets and space-borne observation systems.

Energy-budget-based glacier mass balance and hydrological models driven by satellite observations were developed. These models can be applied to describe glacier-melt contribution to river flow. Satellite hydrological data products were used for forcing, calibration, validation and data assimilation in a distributed river basin model. A pilot study was carried out on the Red River basin.

Multiple hydrological data products were generated using the data collected by Chinese satellites. Total Precipitable Water was retrieved with FY-3D/MWRI data, Snow Cover Area with FY-4A and Himawari-8 and Snow Water Equivalent with FY-3B/MWRI data. A data processing chain was developed to produce the Chinese 16 m GF-1 Analysis Ready Data (ARD). These data were used to retrieve land surface reflectance and to map land cover. A global LAI product at 1 km spatial and 5-day temporal resolution was generated with FY3/MERSI data. LAI was retrieved at higher spatial resolution with the GF1/WFV data at 16 m spatial and 10-day temporal resolution. A new ET dataset from 2000 to 2018 was generated, including rainfall interception loss, snow/ice sublimation and open water evaporation. Higher resolution data were used to characterize glaciers and their response to environmental forcing. These studies focused on the Parlung Zangbo Basin, where glacier facies were mapped with GF, S2/MSI and L8/OLI data. The geodetic mass balance was estimated between 2000 and 2017 with ZY-3 Stereo Images and the SRTM DEM. Surface velocity was studied with L5/TM, L8/OLI and S2/MSI data over the period 2013 – 2019. An updated method was developed to improve the retrieval of glacier albedo by correcting glacier reflectance for anisotropy and a new data set on glacier albedo was generated for the period 2001–2020.

A detailed glacier energy and mass balance model was developed with the support of field experiments at the Parlung 4 and the No. 24 Glacier, both in the Tibetan Plateau. Besides meteorological measurements, the field experiments included glaciological and hydrological measurements. The energy balance model was formulated in terms of enthalpy for easier treatment of water phase transitions. The model was applied to assess the spatial variability in glacier melt. In the Parlung No. 4 Glacier the accumulated glacier melt during the whole period was between 1.5 m w.e. and 2.5 m w.e. in the accumulation zone and between 4.5 m w.e. and 6.0 m w.e. in the ablation zone, reaching 6.5 m w.e. at the terminus. The glacier mass balance over a period of time hides the seasonality in forcing by precipitation and temperature and the gradient in precipitation within the glaciers. These were observed by combining intensive field campaigns with continuous automatic observations.

The linkage of the glacier and snow-pack mass balance with water resources in a river basin was analysed in the Chiese (Italy) and Heihe (China) basins by developing and applying integrated hydrological models using satellite retrievals in multiple ways. The model FEST-WEB was calibrated using retrievals of Land Surface Temperature (LST) to map soil hydrological properties, i.e. soil hydraulic conductivity, Brooks-Corey index, soil depth, minimum stomatal and soil resistances. A watershed model was developed by coupling ecohydrological and socioeconomic systems. Integrated modelling is supported by an updated and parallelized data assimilation system. The latter exploits retrievals of brightness temperature (AMSR), LST (MODIS), precipitation (TRMM and FY-2D) and in-situ measurements.

In the case-study on the Red River Basin a new algorithm has been applied to disaggregate the SMOS soil moisture retrievals by making use of the correlation between evaporative fraction and soil moisture.

Menenti-Multi – source hydrological data products to monitor High Asian River Basins and regional water s.pdf
 
10:00am - 10:15amPlenary: DRAGON 4 POSTER AWARDS
Workshop: Dragon 4
Dragon 4 
10:15am - 10:30amPlenary: DRAGON 4 FINAL RESULTS SYMPOSIUM CLOSING
Workshop: Dragon 4
Dragon 4 

 
Contact and Legal Notice · Contact Address:
Privacy Statement · Conference: 2021 Dragon Symposium
Conference Software - ConfTool Pro 2.6.142+TC
© 2001 - 2021 by Dr. H. Weinreich, Hamburg, Germany